柔性臂约束/非约束模态降维模型精度分析

针对柔性机械臂约束、非约束模态降维的动力学绝对误差问题,可采用有限元法描述柔性变形,并应用拉格朗日法建立其动力学模型,分别利用约束和非约束模态进行降维,来比对两种降维方法的绝对精度。仿真结果表明:约束、非约束模态降维模型都具有较高的动力学精度,取相同阶数的非约束模态动力学精度更高,而约束模态的误差具有随时间累积的特点。     

改进差分进化算法求解多成像卫星调度问题

针对多成像卫星联合调度规划建模难度大和求解复杂度高等问题,通过分析成像卫星的成像过程和工作原理,将成像卫星调度过程分为调度预处理、任务规划和调度优化3个阶段。在调度规划过程中,建立了多星联合调度约束满足最优化模型,采用启发式算法思想,定义了个体适应度评估函数,设计了任务冲突消解方法,提出了一种改进的差分进化算法。在此基础上,采用一些确定性规则对调度规划方案可行解进行了评估和二次优化。结果表明:提出的成像卫星调度问题求解方法能够有效地分配卫星资源,生成优化的调度方案。设计结果也能够为卫星系统最优化设计和效能评估提供必要的决策支持。     

Three-dimensional cooperative guidance strategy and guidance law for intercepting highly maneuvering target

Cooperative interception of the target with strong maneuverability by multiple missiles with weak maneuverability in the three-dimensional nonlinear model is studied. Firstly, the three-dimensional nonlinear model of cooperative guidance is established. The three-dimensional reachable region is represented composed of lateral acceleration and longitudinal acceleration in the two-dimensional coordinate system. Secondly, the problem of the multiple missile's reachable coverage area is transformed into the problem of cooperative coverage. A cooperative coverage strategy is proposed and an algorithm for quickly calculating the number of required missiles is designed. Then, the guidance law based on the cooperative coverage strategy is proposed, and it is proved that cooperative interception of the target can be achieved under the acceleration limit. Moreover, the relations among the number of missiles, the initial array position of terminal guidance and the coverage area of the target’s large maneuver are analyzed. The dynamic adjustment strategy of guidance parameters is proposed to reduce the guidance error. Finally, simulation results show that multiple missiles with low maneuverability can achieve effective interception of target with strong maneuverability through the proposed cooperative strategy and cooperative guidance method.     

Guaranteed performance based adaptive attitude tracking of spacecraft with control constraints

The guaranteed performance control problem of spacecraft attitude tracking with control constraint, disturbance and time-varying inertia parameters is investigated. A new saturation function is designed to satisfy different magnitude constraints by introducing a piecewise smooth asymmetric Gauss error function. Based on the mean-value theorem, the constrained problem is transformed into an unconstrained control design subject to an unknown bounded coefficient matrix. To satisfy the constraints by performance functions, a tracking error constrained control is developed based on a hyperbolic arc-tangent asymmetric barrier Lyapunov function (BLF). In the backstepping framework, an adaptive robust control law is proposed by employing a smooth robust term simultaneously counteracting the parametric and non-parametric uncertainties, where the unknown coefficient matrix resulting from the control constraint is compensated by a Nussbaum function matrix. Rigorous stability analysis indicates that the proposed control law realizes the asymptotically tracking of spacecraft attitude and that the tracking error remains in a prescribed set which implies the achievement of the guaranteed transient performance. Numerical simulations validate the proposed theoretical results.     

航天员虚拟训练中的一维直线运动速度规划算法

研究了身穿航天服的航天员在搬运物体时的运动规律，将搬运物体的过程进行了分类。结合传统的六段加减速算法，对每种情况下的肌肉激活度进行了规划,并采用粒子群算法进行求解。利用Matlab/Simulink搭建了上肢骨骼肌模型，实现了目标物体的速度规划。将动态加速度约束转变为静态肌肉激活度约束，提出了一种在动态加速度约束下基于肌肉激活度规划的速度规划算法。用Matlab对提出的算法进行了验证，证明了算法的可行性。与其他的速度规划算法相比，提出的算法所规划的肌肉激活度更符合人体生物力学，提高了航天员的训练效率。     

Topology optimization of joint load control with geometrical nonlinearity

This paper presents an extended topology optimization approach considering joint load constraints with geo-metrical nonlinearity in design of assembled structures. The geometrical nonlinearity is firstly included to reflect the structural response and the joint load distribution under large deformation. To avoid a failure of fastener joints, topology optimization is then carried out to minimize the structural end compliance in the equilibrium state while controlling joint loads intensities over fasteners. During nonlinear analysis and optimization, a novel implementation of adjoint vector sensitivity analysis along with super element condensation is introduced to address numerical instability issues. The degrees of freedom of weak regions are condensed so that their influences are excluded from the iterative Newton-Raphson (NR) solution. Numerical examples are presented to validate the efficiency and robustness of the proposed method. The effects of joint load constraints and geometrical nonlinearity are highlighted by comparing numerical optimization results.     

弹载大视场星惯组合深度融合导航技术

为了降低弹载星惯组合（Stellar-INS）飞行中段对调姿观星的要求，提高星惯组合姿态精度，提出了大视场（LFOV）星惯组合深度融合导航方法。小视场（NFOV）星敏感器输出星矢量为主，大视场星敏感器可同时输出姿态和星矢量信息，分别推导了基于星敏感器输出姿态和星矢量信息的观测方程，分析了星矢量和姿态观测方法之间的关联性。建立了包含星惯安装误差、陀螺误差以及初始平台误差角的星惯组合全误差项模型，基于线性卡尔曼滤波给出了深度融合导航方法。开展了数学仿真验证，分析了不同调姿观星路径约束下，大/小视场星惯组合性能差异。结果表明，大视场星惯组合深度融合导航方法不仅可以降低调姿观星约束要求，还可以实现组合姿态性能提升。     

Error constrained control of a pseudo-satellite with disturbance

This paper presents the control scheme of a pseudo-satellite in situations where error constraints, uncertainties, and external disturbances occur. The control scheme of a pseudo-satellite includes planar path following control scheme and altitude control scheme. In order to control the altitude of a pseudo-satellite, the backstepping technique is used to control the quality of air in the air balloon. To deal with the error constrained requirements of a pseudo-satellite’s position, a tan-type barrier Lyapunov function (TBLF) is proposed and incorporated with the guidance control schemes. Adaptive fuzzy disturbance observers are presented to estimate uncertainties and external disturbances. Rigorous stability analysis proves that the altitude error of the pseudo-satellite can be uniformly bounded, and the position error of which can be maintained within the range of constrained requirements, while all closed-loop signals are uniformly bounded regardless of uncertainties and disturbances.     

Stiffeners layout design of thin-walled structures with constraints on multi-fastener joint loads

The purpose of this paper is to present an extended topology optimization method for the stiffeners layout design of aircraft assembled structures.Multi-fastener joint loads and manufacturing constraints are considered simultaneously.On one hand,the joint loads are calculated and constrained within a limited value to avoid the failure of fasteners.On the other hand,the manufacturing constraints of the material distribution in the machining directions of stiffeners are implemented by an improved piecewise interpolation based on a beveled cut-surface.It is proven that the objective function is strictly continuous and differentiable with respect to the piecewise interpolation.The effects of the extended method with two different constraints are highlighted by typical numerical examples.Compared with the standard topology optimization,the final designs have clearly shown the layout of stiffeners and the joint loads have been perfectly constrained to a satisfying level.     

考虑运动学约束的不规则目标遗传避碰规划算法

 针对复杂环境下不规则目标的路径规划问题,提出了一种带有运动学约束的遗传避碰规划算法。以舰载机在航母甲板上的路径规划问题作为研究对象,并且该算法可推广至其他具有此类约束的路径规划问题中,它较好地解决了目标形状复杂、障碍环境复杂、目标运动时带有回转半径约束等特殊问题。在传统遗传路径规划算法的基础上,针对性地设计了三维位置和姿态混合编码、三段法路径解码、轨迹包围盒的碰撞检测及距离计算等方法,并在遗传操作中引入惩罚项和修补策略来辅助算法寻优。最后,为得出复杂环境下的最优路径,基于VC++平台对算法进行了仿真验证。结果表明,在复杂障碍环境下,本文提出的算法可求得最优避碰路径,并满足预先设定的目标回转半径约束,能够有效地解决此类目标的避碰路径规划问题。