基于微型涡喷发动机热喷流的无源流体推力矢量喷管的控制规律

流体推力矢量喷管型面固定、活动部件少、结构重量轻，能够为高机动飞行器提供有效的飞行控制手段，但无源流体推力矢量喷管热喷流的偏转控制规律尚未完全掌握。为了推进无源流体推力矢量技术的实用化，本文设计研制了适用于微型涡喷发动机的耐高温喷管模型，对该喷管在微型涡喷发动机热喷流状态下的控制规律进行研究。利用非接触光学显示和测量手段——红外热成像拍摄和粒子图像测速（PIV）技术对主射流流动特性进行研究，获得流动矢量角随二次流控制阀门闭合度变化的控制规律；利用六分量盒式天平测力实验研究无源流体推力矢量喷管的力学特性，获得推力矢量角随二次流控制阀门闭合度变化的控制规律。研究结果表明：该构型喷管在微型涡喷发动机热喷流下主射流连续可控偏转，最大流动矢量角为-12.3°/12.3°，最大推力矢量角为-12.9°/12.8°，控制规律接近线性，不存在主射流偏转突跳问题。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.     

橡皮囊液压成形回弹补偿技术比较分析

橡皮囊液压成形工艺是航空钣金成形的主要方法之一,而回弹是影响其产品制造精度的主要缺陷。为提高航空钣金零件制造精准化制造水平,国内开展了大量的研究和实践,但各种方法的工程化应用程度并不理想。针对基于数值模拟的回弹预测方法和基于零件几何特征的快速回弹补偿方法进行综述,对比分析了两种方法的优缺点,并结合航空企业工程化应用实际需求提出将两种方法相结合的解决方案。     

小型固定翼无人机绳钩回收过程动力学分析

绳钩回收作为小型固定翼无人机的一种精确定点拦阻无损回收技术,近年来在国内外得到迅速发展。本文以某型无人机的绳钩回收系统为研究对象,对绳钩回收系统进行了参数化处理并建立了两种动力学仿真模型。一是在考虑回收架柔性基础上建立了基于Lagrange方程的绳钩回收系统的动力学仿真模型,二是在考虑绳索变形和系统结构细节基础上建立了基于MSC.ADAMS的绳钩回收系统的多体动力学仿真模型。通过上述两种仿真模型的算例分析以及与某型无人机绳钩回收试验的测试数据作对比,验证了两种动力学仿真模型在绳钩回收系统不同设计阶段的适用性和有效性。     

Modeling visuospatial reasoning

I apply my proposed modification of Soar/Spatial/Visual System and Kosslyn’s (1983) computational operations on images to problems within a 2 × 2 taxonomy that classifies research according to whether the coding involves static or dynamic relations within an object or between objects (Newcombe & Shipley, 2015). I then repeat this analysis for problems that are included in mathematics and science curricula. Because many of these problems involve reasoning from diagrams Hegarty’s (2011) framework for reasoning from visual-spatial displays provides additional support for organizing this topic. Two more relevant frameworks specify reasoning at different levels of abstraction (Reed, 2016) and with different combinations of actions and objects (Reed, 2018). The article concludes with suggestions for future directions.     

一种温度动态调节方法及其动态性能仿真研究

航空气源模拟试验台主要用于模拟不同飞行状态时发动机给空气管理系统的供气,由于飞机爬升、降落时发动机供气参数会急剧变化,因此航空气源模拟试验台需具备动态能力.基于一种温度动态调节方法,在合理简化的基础之上采用NHT方法对其温度动态性能进行了仿真研究,仿真结果表明该温度动态调节方法能够满足温度动态性能需求,对动态航空气源模拟试验台的设计选型有较高的参考价值.     

基于纳米吸能流体的火工点式分离装置缓冲技术研究

运载火箭火工点式分离装置工作时具有强冲击载荷特性，为有效降低冲击峰值，提出了一种基于纳米吸能流体结构的冲击缓冲技术。首先进行纳米吸能流体的吸能原理研究，建立其本构关系，揭示影响其吸能密度的主要因素；其次开展火工装置有限空间内的纳米吸能流体缓冲结构设计；最后通过有限元仿真与试验验证其缓冲性能。试验结果表明，本文设计的基于纳米吸能流体的缓冲结构，吸能密度高达122.8 J/g，冲击力峰值较空载条件下降了59.2%，冲击加速度峰值下降了63.4%。     

涡环伞降末敏子弹的稳态扫描动力学特性

综合采取理论建模、高空自由落体试验及可视化仿真相结合的方法,研究了一种涡环伞降末敏子弹的稳态扫描动力学特性。基于第一类拉格朗日方程,建立了由弹体、降落伞、伞盘、摩擦盘、连杆所组成的五刚体动力学模型,并应用ADAMS、MATALB及VR相结合的方法进行了弹道计算和可视化仿真研究。通过在高空热气球上投放试验样弹的方法,得到了伞弹系统的运动图像、平均落速、转速等弹道数据。对比研究得出:涡环伞的运动稳定性良好,可使末敏子弹保持匀速旋转降落状态,弹体达到稳定后的落速约为13.5 m/s,转速约为3 r/s,稳态扫描角接近于弹体的静态悬挂角,仿真计算与试验结果的一致性较好。      

考虑非理想噪声干扰的直升机飞行动力学模型辨识方法

利用MATLAB/SIMULINK平台搭建了直升机仿真实验系统，并以UH-60直升机为对象实现了考虑非理想噪声干扰的仿真飞行实验。建立了非理想噪声数学模型并基于增广最小二乘法设计 了一套同时考虑模型参数和噪声参数的综合辨识算法，在此基础上，利用仿真实验数据实现了UH-60直升机纵向飞行动力学模型的辨识与验证。最后，通过与普通最小二乘法的对比验证了本文方法的优越性。      

Observations of a quasi-90-day oscillation in the MLT winds and tides over an equatorial station using meteor radar winds

An evident signature of a least studied quasi-90-day oscillation is found in the winds and tides in the MLT from an equatorial station, São João do Cariri (7.4°S, 36.5°W). The oscillation is found to appear mainly in certain intervals with small but appreciable seasonal (fourth harmonic of annual oscillation) contribution. The maximum amplitude of the oscillation is found to be around 10 m/s in the zonal wind. The enhancement peak of the oscillation exhibits downward movement indicating a plausible role of upward moving waves/tides in carrying its imprint from below to the MLT. Similar oscillation feature in the tropospheric zonal wind and ozone may imply its lower atmospheric origin as a component of the intraseasonal oscillation (ISO) that moves upward by modulating the tides. Subsequently, the propagating tides (mainly semidiurnal) are enhanced by the ozone in the stratosphere through absorption of solar UV radiation and finally manifest the oscillation in the MLT. Consistency of the present findings with the past investigations are observed in some aspects of the oscillation, whereas existing mismatches in others are believed to be due to geophysical variability depending on space and time among various locations on the globe.