Transition control of a tail-sitter unmanned aerial vehicle with L1 neural network adaptive control

The main task of this work is to design a control system for a small tail-sitter Unmanned Aerial Vehicle(UAV) during the transition process. Although reasonable control performance can be obtained through a well-tuned single PID or cascade PID control architecture under nominal conditions, large or fast time-varying disturbances and a wide range of changes in the equilibrium point bring nonlinear characteristics to the transition control during the transition process, which leads to control prec...     

Interaction tonal noise generated by contra-rotating open rotors

Fast and accurate prediction of sound radiation of Contra-Rotating Open Rotors(CRORs) is an essential element of design methods of low-noise open rotor propulsion systems.In the present work, a previous frequency-domain model is extended to predict CROR noise. It builds explicitly the relationship between harmonic loadings and corresponding tonal noise, by which the influential parameters to noise generation can be clearly understood. The real distributions of steady and unsteady blade loadings ...     

基于几何设计法的航空发动机内外机匣减振控制新方法

航空发动机在运行过程中，由于其结构的复杂性和外部气流的不稳定性，不可避免地会产生大量的振动问题。针对航空发动机整机振动问题，首先根据航空发动机的实际结构并结合经验总结，建立了一种通用的转子-支承-机匣振动传递动力学模型，并从航空发动机内外机匣减振控制问题出发，利用一种新型的控制算法（几何设计法），在有限频域内来设计减振控制器，在传感器和执行机构受限的情况下，尝试对多个输出量（即航空发动机的内机匣和外机匣）进行减振控制，并与经典控制理论法比例、微分、积分（Proportional integral derivative,PID）设计的减振控制器进行减振效果对比，最后通过Matlab/Simulink搭建仿真模型并进行仿真验证。结果表明，几何设计法在有限频域内可以直观地获得最优控制器的存在性、唯一性、最优性，对于主控对象的减振控制最优可高达25 dB，相较于传统控制方法形成明显优势。     

锯切圆柱形42CrMoA的声发射监测试验

针对锯切加工中的带锯条磨损状态未知、锯切质量下降等问题，本文研究了新试制的FTCUT双金属带锯条锯切圆柱形42CrMoA合金结构钢过程中锯切行为的变化，探讨了声发射信号与单刀锯切过程、锯齿磨损和锯切表面质量变化的关联。研究表明：锯切圆柱材料时随着锯切深度的变化，参与齿数先增大后减小，带锯条约束条件不断变化，进而影响着声发射信号幅值和锯切表面质量；基于时域分析可知锯齿磨损过程分为磨合磨损、快速磨损、稳定磨损三个阶段；基于FFT频域分析发现当频谱图出现多个主频，且第一主频幅值下降时，表明声发射信号来源比较分散，即可认定带锯条失效；基于小波包频域分析发现第7频段信号占比最高，最能反映工件表面质量的变化，其波动情况与锯切表面的微纹和波纹情况可建立一定的联系。因此，可基于声发射信号时域和频域分析判断锯齿磨损和锯切表面恶化情况，为锯齿磨损和锯切表面质量的在线监测提供一定的思路。     

Source free unsupervised domain adaptation for electro-mechanical actuator fault diagnosis

A common necessity for prior unsupervised domain adaptation methods that can improve the domain adaptation in unlabeled target domain dataset is access to source domain dataset and target domain dataset simultaneously. However, data privacy makes it not always possible to access source domain dataset and target domain dataset in actual industrial equipment simultaneously, especially for aviation component like Electro-Mechanical Actuator (EMA) whose dataset are often not shareable due to the data copyright and confidentiality. To address this problem, this paper proposes a source free unsupervised domain adaptation framework for EMA fault diagnosis. The proposed framework is a combination of feature network and classifier. Firstly, source domain datasets are only applied to train a source model. Secondly, the well-trained source model is transferred to target domain and classifier is frozen based on source domain hypothesis. Thirdly, nearest centroid filtering is introduced to filter the reliable pseudo labels for unlabeled target domain dataset, and finally, supervised learning and pseudo label clustering are applied to fine-tune the transferred model. In comparison with several traditional unsupervised domain adaptation methods, case studies based on low- and high-frequency monitoring signals on EMA indicate the effectiveness of the proposed method.     

耐高温复合材料在火星探测器着陆器减速伞筒盖结构上的应用

针对火星探测器着陆巡视器减速伞筒盖结构在轨运行耐温度交变、辐照等空间环境和再入过程耐温度冲击性能需求,重点开展了筒盖复合材料耐温匹配性、力学性能、耐空间环境性能以及制件成型工艺研究。结果表明,选用J-168-1胶黏剂、J-245胶黏剂及T300/QY8911复合材料制备的试件通过各项性能试验考核,均能满足筒盖结构的设计指标要求。筒盖产品力学性能稳定,成型工艺可行性良好,最高瞬时使用温度可达200℃,经历空间环境模拟后力学性能保持率均在80%以上,耐高温、耐空间环境性良好。产品已成功装星发射,并在着陆巡视器落火阶段成功弹出分离,圆满完成使命。     

大气环境监测卫星紫外高光谱大气成分探测仪技术发展及应用

大气环境监测卫星是我国民用空间基础设施中长期发展规划中的科研卫星。本文介绍了搭载于该卫星的新一代紫外高光谱大气成分探测仪，通过发展紫外高光谱大幅宽高分辨超光谱成像技术，使紫外谱段高光谱大气观测空间分辨率提升一倍，大幅提升气态污染物监测能力，取得良好的应用效果。     

基于萤火一号技术的自主火星探测器方案

提出了基于萤火一号（YH-1）火星探测器技术的自主火星探测器方案,可携带多种有效载荷在准太阳同步圆轨道上对火星进行科学探测。该方案具有可实现性强、成本低、研制周期短等特点,并能满足火星探测后续工程中的环绕器设计要求,利于我国火星探测的长远发展。利用长征三号乙运载火箭,在西昌卫星发射中心就可实现2013/2016年的我国自主火星探测。     

Hardware qualification for scientific ballooning missions

The European Stratospheric Balloon Observatory (ESBO) initiative aims at simplifying the access to stratospheric balloon missions. We plan to provide platforms and support with instrument design in order to support scientists. During the design process, the inevitable question of qualification for the harsh flight conditions arises. Unfortunately, there is no existing standard for qualification of stratospheric ballooning hardware. Thus, we developed a qualification procedure for use within ESBO and similar projects.In this paper, we present our analysis of the environmental conditions in the stratosphere. While conditions at typical balloon float altitudes are similar to the space environment, there are also some relevant differences. For example, the thermal environment is dominated by radiation and thermal conduction, but the remaining atmosphere still supports a certain amount of convection. The remaining atmospheric pressure in the stratosphere also leads to reduced arcing distances. Vibrational loads are far less than for space missions, but quasi-static or shock loads may occur. The criticality of radiation increases with mission duration.Based on the environmental conditions, we present the qualification procedures for ESBO, which are based on the European Cooperation for Space Standardization (ECSS) standards for space systems. Overtesting against too high requirements leads to overengineering, driving mission cost and mitigating the advantages of balloons over space missions. Therefore, we modified the ECSS standards to fit typical scientific ballooning missions over several days at altitudes up to 40 km. Furthermore, we analyzed design rules for space systems with regard to their relevance for scientific ballooning, including material and component selection. We present the experience from the hardware qualification process for the ESBO prototype STUDIO (Stratospheric UV Demonstrator of an Imaging Observatory). Even though boundary conditions are different for each individual mission, we aimed for a broader approach: We investigated more general requirements for scientific ballooning missions to support future flights.