CE5T拓展试验轨道精度分析

针对嫦娥5T服务舱(CE5T)拓展试验中的绕地大椭圆轨道，分析了轨道动力学演化趋势，通过测轨数据类型组合策略分析了统一S频段测量(USB)和甚长基线干涉测量(VLBI)在定轨中的贡献，得到了百米级的精密定轨精度；针对地月第二平动点(L2)绕飞轨道，分析了地心和月心积分的轨道动力学差异，制定了精密定轨的参数求解策略，得到了百米级的精密定轨精度；针对月球交会对接轨道的特点，选取三种不同的重力场模型定轨，比较了三者在轨道预报和数据拟合的差异，并与嫦娥3号(CE3)环月轨道的定轨精度进行比对，验证了不同重力场的适用范围，从计算精度和效率两方面制定了优化的定轨策略。     

SNR periodical variation of Chang'E-3 spacecraft orbiting the Moon

Chang'E-3 spacecraft was orbiting the Moon from December 6–14, 2013, and very long baseline interferometry(VLBI) observations were performed to improve the accuracy of its orbit determination. In the process of recording VLBI raw data, 2 bits quantization was implemented.Interesting phenomenon was that signal-to-noise ratio(SNR) of each VLBI station experienced periodical change and had large variation on amplitude while in the Moon's orbit, whereas SNR kept in a stable level after Chang'E-3 landed on the Moon. Influence of varying elevation angle on SNR was analyzed and compensation of 2 bits quantization harmonics to SNR calculation was investigated. Most importantly, telescope system noise temperature increase caused by the Moon was computed along the time of Chang'E-3 orbiting the Moon, and well matched SNR changing trend in terms of correlation coefficients.     

用于太阳系天体VLBI观测的时延模型

VLBI观测技术可以用于对深空航天器的跟踪定位以及测速观测．这类近距离天体发出的射电信号波前是球面波．为此，本文提出了一个1ps精度下近距离射电天体地面VLBI观测时间延迟模型．     

深空网干涉测量数据对嫦娥五号定轨能力分析

针对嫦娥五号探测器(CE-5)开展基于深空网测量数据的定轨能力分析.首先从测量原理分析了深空网VLBI数据的误差源,然后利用CE-5的精密轨道评估了 VLBI数据的误差,最后基于实测数据与协方差分析理论,分析UXB与VLBI数据的定轨能力.结果表明:转移阶段,单独利用深空网测量数据可以获取优于1 km的转移轨道精度,标...     

VLBI for better gravimetry in SELENE

The Japanese lunar explorer SELENE (SElenological and Engineering Explorer), to be launched in 2007, will for the first time utilize VLBI observations in lunar gravimetry investigations. This will particularly improve the accuracy to which the low degree gravitational harmonics and the gravity field near the limb can be measured, and when combined with Doppler measurements will enable three-dimensional information to be extracted. Differential VLBI Radio sources called VRAD experiment involves two on-board sub-satellites, Rstar and Vstar. These will be observed using differential VLBI to measure the trajectories of the satellites with the Japanese network named VERA (VLBI Exploration of Radio Astrometry) and an international VLBI network.     

Observation level combination of SLR and VLBI with c5++: A case study for TIGO

A multi-technique space geodetic analysis software named c5++ has been developed and allows one to combine data on the observation level. With SLR and VLBI modules being ready and tested, this software has been used to compute coordinate time series of the geodetic fundamental station TIGO, located near Concepción, Chile. It can be shown that the combination of space geodetic data on the observation level leads to a significant improvement of station position repeatability, which is an important measure for the stability of a station in the terrestrial reference frame. Moreover, it could be demonstrated that the geophysical signal of the post-seismic tectonic plate movement is usually more complete than detected by any of the two single-technique solutions. In addition, it has been confirmed that so-called nuisance parameters, which are relying on data from a single technique, are not biased when combing observations from different space geodetic techniques.     

VGOS基带数据预处理系统研究

VLBI全球观测系统-VGOS的数据采集系统具有超宽的记录带宽和超高的数据速率，数据率稳定可达16Gbit/s。数据回放及解析等预处理工作是数据采集到相关处理的关键步骤。针对国内VGOS数据采集系统，研发了VGOS基带数据预处理系统，分析了高速记录的元数据及基带数据格式，设计实现了数据记录、聚合、解析、重组等预处理模块。通过对预处理系统的研究和测试，分析了其效率提升的方法。利用预处理系统成功对国际VGOS站观测数据进行回放和解析，经过数据的相关处理成功获得了干涉条纹。表明预处理系统可正确处理高速数据，预处理过程中数据聚合速率平均可达到10Gbit/s，解析效率可达3.6Gbit/s，满足当前VGOS观测数据的超宽带、超高速处理要求。