钻取式自动采样机构螺旋钻杆结构参数的多目标优化

分析了螺旋钻杆的输出月壤原理和输出月壤阻力（阻力矩）以及综合考虑了螺旋槽内月壤对钻杆驱动力矩的影响、螺旋升角的取值范围和钻杆的轴向钻进功率后建立了钻杆驱动力矩、轴向加载力及功耗的模型。利用该模型分析了钻杆外径、螺旋槽深、槽宽比及螺旋升角等结构参数对钻杆驱动力矩和轴向加载力的影响,获得了钻杆结构参数对钻杆驱动力矩和轴向加载力的影响规律。以钻杆质量和功耗最小为双优化目标,以钻杆外径、螺旋槽深、槽宽比及螺旋升角等结构参数为设计变量,基于遗传算法对钻杆结构参数进行了优化,优化后的功耗较优化前降低了31.8%,钻杆质量减小了23.3%。总体减少了钻探风险,可为钻取式自动采样机构的设计提供理论依据。     

Experimental investigation on deformation behavior of TJ-1 lunar soil simulant subjected to principal stress rotation

The knowledge of mechanical properties of lunar soil is of fundamental importance for the coming exploration of the Moon. This paper aims to investigate the fundamental deformation behavior of lunar soil and the effects of the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress during the principal stress rotation. First, an improved technique was proposed to generate homogeneous samples based on the Multi-layer Undercompaction Method. Second, three series of tests on TJ-1 lunar soil simulant under the principal stress rotation were performed with a hollow cylinder apparatus at Tongji University, China. In each series of tests, only one value of the three variables mentioned above was changed while the others were kept constant. The test results demonstrate that the rotation of principal stress can result in significant plastic deformation, volumetric strain, and non-coaxiality (non-coincidence of the increment direction of principal plastic strain with the principal stress direction) of TJ-1 lunar soil simulant. In addition, it is found that the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress have different influences on the four strain components, i.e. _εz,_εr,_εθ${\epsilon }_z\text{,}{\epsilon }_{\text{r}}\text{,}{\epsilon }_{\theta }$ and _γzθ${\gamma }_{z\theta }$, volumetric strain, and non-coaxiality during the principal stress rotation. The influence of deviatoric stress ratio is relatively stronger than the others. Therefore, the influence of principal stress rotation on the deformation behavior of lunar soil should be taken into account carefully in the design and construction of facilities on the lunar surface in the future.     

E10.7指数在软X射线谱段的修正应用

表征EUV辐射通量的E10.7指数在越来越多的研究和应用中被用来代替传统的F10.7指数.X射线对地球D层和E层的电离起着重要作用,但由于D层观测数据的不足和E层电离源的多样性,难以被用来考虑X射线对电离层的影响.火星电离层下层的电离源几乎是单一的软X射线,这为研究X射线对电离层的作用提供了可能性.通过研究火星电离层下层的峰值电子浓度对E10.7的依赖关系,发现即便经过必要的修正,这种关系对不同的观测时段并不具备一致性.通过理论推导和数据分析,得到了一种特别用于描述太阳软X射线辐射通量的新指数,即Xs指数,用来替代E10.7指数.Xs指数在描述火星电离层下层对太阳辐射的依赖关系时,不同的观测时段有很好的一致性,表明Xs指数在表征太阳软X射线辐射强度方面比E10.7指数更加合适.      

不同地面条件重装空投气囊着陆缓冲过程数值分析

刚性地面假设的重型装备空投的数值结果无法准确模拟空投的着陆姿态,需使用土壤地面对空投的缓冲性能进行研究。使用LS-DYNA有限元仿真软件对土壤地面和刚性地面下空投的着陆缓冲性能进行对比,研究刚性地面的适用条件;并研究土壤地面下不同横向风速对空投着陆缓冲性能的影响。结果表明：空投竖直冲击地面时,两种地面下货物的最大过载差...     

梯形齿车轮月面牵引性能的离散元分析

采用离散元法分析梯形齿车轮在月面软土地形的通过性,提出不规则形状颗粒群系统的离散元建模技术,建立车轮牵引性能参数的细观表达式.基于模拟月壤的直剪实验数据,通过反复调试获得最佳土单元模型参数.轮-土作用的离散元分析结果表明:车轮在月壤地形的牵引性能与滑转率和轮齿结构有关,增加滑转率可获得更高的挂钩牵引力,但同时车轮所需的驱动转矩提高;增加轮齿高度可获得更大的土壤推力,但行驶阻力也相应增大;轮齿数量对车轮牵引性能影响较小,但影响车轮在行驶中的平顺性.     

月面巡视探测器动力学建模

动力学模型是研究星球探测车运动的基础。以某月面巡视探测器原理样机为背景,建立了其动力学模型,并进行了数值仿真分析。在说明月壤机械特性的基础上,结合地面车辆力学的知识,分析了松散月壤上刚性车轮的受力,考虑了主动驱动和被动驱动的情形,利用数学拟合的方法得到了满足工程要求的简化模型。在一定假设条件下,以牛顿欧拉法建立了三自由度整车动力学模型,建模时同时考虑了驱动和转向的相互影响。最后,数值仿真结果定性地验证了月面巡视探测器动力学模型的正确性。     

驱动轮结构参数对月球车牵引性能影响研究

研究在月球表面环境下月球车的牵引通过性能,对保证其正常探测工作具有重要意义.根据牵引性能的评价指标,在模拟月壤-车轮土槽测试系统上对不同结构参数的驱动轮牵引性能进行对比试验.结果表明,当增大驱动轮宽度和直径时,其挂钩牵引力和效率系数都呈增大趋势;增大驱动轮的轮刺高度,挂钩牵引力增大;当滑转率小于20%时,效率系数随着轮刺高度的增大而增大,而当滑转率大于20%时,效率系数随着轮刺高度的增大而减小;增大驱动轮轮刺密度时,其挂钩牵引力和效率系数随之先增大后减小.      

月面钻进真空环境模拟装置的设计与验证

探月工程（三期）项目提出了在月面进行至少2 m深度的钻取采样任务,前期需要在地面进行模拟月面钻进过程热特性的研究,为此本文发明了一套月面真空环境模拟装置。根据模拟月壤钻进试验的要求,设计了一种可从底部抽气的三段式可多次拆装的真空罐结构。考虑到模拟月壤的颗粒大小和快速抽真空的要求,设计了一种筛网状具有多层过滤结构的月壤筒。根据在真空度不变的条件下可进行连续多次钻进试验的要求,设计了可从外部操作的具有缺齿结构的月壤筒转动机构。由真空度要求和可耐粉尘的特性要求,选取了三级扩散泵组。实验表明,在不放置模拟月壤的情况下,本环境模拟装置中的真空度可达10-1 Pa,在放置模拟月壤的情况下,真空度可达7 Pa,能够满足模拟月面钻进过程热特性试验的要求。此外,通过测量抽真空过程中真空度随时间的变化情况还得出了模拟月壤出气量曲线,对模拟月壤真空系统的实验应用具有重要价值。      

Survival and death of the haloarchaeon Natronorubrum strain HG-1 in a simulated martian environment

Halophilic archaea are of interest to astrobiology due to their survival capabilities in desiccated and high salt environments. The detection of remnants of salty pools on Mars stimulated investigations into the response of haloarchaea to martian conditions. Natronorubrum sp. strain HG-1 is an extremely halophilic archaeon with unusual metabolic pathways, growing on acetate and stimulated by tetrathionate. We exposed Natronorubrum strain HG-1 to ultraviolet (UV) radiation, similar to levels currently prevalent on Mars. In addition, the effects of low temperature (4, −20, and −80 °C), desiccation, and exposure to a Mars soil analogue from the Atacama desert on the viability of Natronorubrum strain HG-1 cultures were investigated. The results show that Natronorubrum strain HG-1 cannot survive for more than several hours when exposed to UV radiation equivalent to that at the martian equator. Even when protected from UV radiation, viability is impaired by a combination of desiccation and low temperature. Desiccating Natronorubrum strain HG-1 cells when mixed with a Mars soil analogue impaired growth of the culture to below the detection limit. Overall, we conclude that Natronorubrum strain HG-1 cannot survive the environment currently present on Mars. Since other halophilic microorganisms were reported to survive simulated martian conditions, our results imply that survival capabilities are not necessarily shared between phylogenetically related species.     

SMOS与Aquarius卫星海表盐度测量方法及数据的对比分析

国际上发射的海表盐度遥感卫星主要有2颗:欧洲的SMOS和美国的Aquarius卫星,为给后续海表盐度遥感提供参考借鉴,对比分析了这2颗卫星的遥感器载荷、数据处理算法和盐度数据。遥感器载荷方面,SMOS采用L波段二维综合孔径辐射计,而Aquarius采用L波段实孔径辐射计加散射计;数据处理算法方面,分析了二者在介电常数模型、海面粗糙度校正以及反演算法方面的差异;盐度数据方面,分析了SMOS与Aquarius盐度数据之间的相关程度,并分别与ISAS(In Situ Analysis System)浮标盐度数据作对比,分析了2颗卫星的盐度数据精度。将2颗卫星的盐度遥感数据与ISAS浮标盐度数据对比发现,在全球范围内,Aquarius盐度测量精度优于SMOS;但在开阔海域,SMOS盐度测量精度优于Aquarius;而在近海岸区域,均出现较大的误差,且SMOS数据误差更大。