基于区域划分的LEO卫星星座QoS路由算法

针对LEO卫星网络中由于流量分布不均导致的拥塞问题,以及多种通信业务带来的QoS保障问题,提出了基于区域划分的多业务QoS路由算法(MSR-RP).算法考虑了信关站有限分布造成的漏斗流量问题,一方面通过划分动态区域,减少区域节点数量,降低了算法整体计算复杂度;另一方面,在轻负载区域采用最短路径算法计算路由,重负载区域采...     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

肼类动态标准气体发生装置的设计

研制了用于制取肼类标准气体的动态配气装置。该装置通过精密控制的蠕动泵连续不断地注射一定量的肼类液体 ,同时以加热的高纯氮气作为载气 ,在动态中混合均匀后得到一定体积分数的肼类标准气体。结果显示 ,在载气温度、载气流量以及环境温度一定的条件下 ,通过控制进给流量可制备体积分数为 (0 .1～ 10 0 )× 10 -6的肼类标准气体     

针对不同目标时对接机构适应性研究

讨论了对接过程的动力学模型、与不同质量飞行器对接过程的特点，以纵向性能为例，提出了缓冲性能参数与对接初始条件组合设计，使对接机构能够适应不同对接飞行器质量特性的要求。仿真结果表明，该方法是可行的。     

桁架结构的静动态特性有限元分析

通过对桁架结构的静、动态分析，探讨如何建立桁架的有限元模型及计算方法，并利用MSC．Patran／Nastran程序对该结构进行静、动态分析计算，计算结果与实际情况吻合。     

飞机机头附近液态水含量分布规律的数值研究

在飞行器飞行过程中,安装在机头上的各类传感器结冰会对飞机的飞行安全产生不利影响。而液态水含量是影响飞机结冰的重要参数,为了更好地进行传感器结构及布局设计,对机头附近液态水含量分布规律进行数值研究。采用计算流体力学方法对飞机飞行时的空气-过冷水滴的稀疏两相流场进行数值模拟,通过求解N-S方程获得空气流场,采用欧拉法求解水滴运动场得到水滴运动轨迹。分析在不同来流马赫数、来流迎角及液滴直径等条件下,机头关键截面上广义水滴遮蔽高度的变化及机头关键位置上液态水含量的变化规律,研究不同状态参数对液态水含量分布的影响。结果表明:水滴遮蔽高度及浓度增加区范围随马赫数增大而增加,迎角的变化对机头上下表面液态水含量分布产生相反的影响。     

某型减压器安全阀持续放气故障试验研究

某型飞机氧气系统所用的集成减压器在使用过程中连续多次出现低压安全阀持续放气故障,为了分析故障原因,根据该型减压器结构和工作原理,结合对故障现象和故障树的分析,设计相关试验,提出改进措施,并进行试验验证。结果表明：减压活门的阻尼特性与减压器的输出流量不匹配是导致故障的主要原因。在大流量情况下,减压活门一直处于振动状态,使...     

基于Java的数据结构算法演示系统

本文介绍了基于Java Applet实现数据结构课程中算法动态演示的总体设计。详细描述了主界面的设计和算法演示界面的设计，并以迷宫求解算法的为例，介绍了算法动态演示的详细设计过程。     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。