4D Lattice Flower Constellations

4D Lattice Flower Constellations is a new constellation design framework, based on the previous 2D and 3D Lattice theories of Flower Constellations, that focus on the generation of constellations whose satellites can have different semi-major axis and still present a constellation structure that is maintained during the dynamic of the system. This situation can arise when dealing with satellites with very different instruments, or when it is of interest to coordinate two different constellations. In that sense, 4D Lattice Flower Constellations constitutes the most general representation of the Flower Constellation formulation. In addition, the effects of the $J_2$ perturbation are taken into account in order to generate distributions that maintain their initial design configuration under this perturbation for longer periods of time with a low fuel budget. Finally, examples of application are presented, showing the possibilities in satellite constellation design of this new approach.     

The bistatic radar capabilities of the Medicina radiotelescopes in space debris detection and tracking

An accurate measurement of the position and trajectory of the space debris fragments is of primary importance for the characterization of the orbital debris environment. The Medicina Radioastronomical Station is a radio observation facility that is here proposed as receiving part of a ground-based space surveillance system for detecting and tracking space debris at different orbital regions (from Low Earth Orbits up to Geostationary Earth Orbits). The proposed system consists of two bistatic radars formed by the existing Medicina receiving antennas coupled with appropriate transmitters. This paper focuses on the current features and future technical development of the receiving part of the observational setup. Outlines of possible transmitting systems will also be given together with the evaluation of the observation strategies achievable with the proposed facilities.     

不同扫描条件下的小动物成像评估

为了评估在不同高压、滤光片厚度和管电流条件下的小动物成像,开发了一套动物成像微型CT装置,并在此装置上进行了不同高压、滤光片厚度、球管电流和曝光时间条件下的老鼠成像。以蒙特卡罗软件包PENELOPE为基础,开发了模拟本装置使用的X射线球管光谱的模型。同时,基于Matlab平台开发了计算X射线柬各种参数,包括平均能量、光强变化以及透射率变化等的软件平台。评估了各种影响微型CT成像的参数对信噪比（SDNR）的影响,并分析了成像参数选择与信噪比之间的关系。文中一系列针对小动物成像和图像质量评估的工具和方法可被广泛应用于小动物成像领域。     

航天复合材料压力容器研制技术

分析了航天复合材料压力容器技术指标特点。提出了容器金属内衬、增强纤维和树脂基体的选材要求。讨论了金属内衬全金属承压区、薄膜区、封头过渡区、封头/筒体界面、焊接区的结构设计方法,以及圆柱形、球形、近球形、椭球形、环形、锥形容器纤维缠绕复合材料壳体结构特点。简述了结构设计算法,以及包括疲劳寿命、应力断裂寿命、爆破前先泄漏(LBB)安全失效模式等容器安全设计的分析和试验方法。     

纤维增强复合材料钻削分层的研磨检测

复合材料钻削分层缺陷是影响复合材料构件后续加工质量和效率的关键因素之一,针对该问题,设计不同钻深孔的分层缺陷产生与检测实验,揭示分层产生及演变历程。获得了孔出口三维分层形貌,分析了分层缺陷动态变化及影响。     

高温合金小孔钻削攻丝加工的方法

高温合金材料的小孔加工,特别是孔径尺寸上下偏差差值小的孔及小螺纹的加工,保证一次加工合格率较为困难,本文结合实际加工的某零件,从高温合金的切削特点、加工技法等方面进行探讨,详细叙述小孔钻削、攻丝加工的经验和方法,通过方法改进,高效高质完成产品的高精度尺寸要求.     

关于PA-34飞机空中最小操纵速度的试验研究

主要介绍空中最小操纵速度,并以PA-34飞机的一次飞行试验为例,对空中最小操纵速度试飞的试验目标、试验方法和条件以及试验结果进行了论述。从飞机实际操作影响、FAA适航条款(14CFR23部)[1]等方面对该飞机的空中最小操纵速度试验结果进行了分析和讨论。试验表明,PA-34飞机的空中最小操纵速度满足FAA适航条款要求,飞机向好发动机方向适度倾斜会减小最小操纵速度。     

Formation of interlayer gap and control of interlayer burr in dry drilling of stacked aluminum alloy plates

In aircraft assembly, interlayer burr formation in dry drilling of stacked metal materials is a common problem. Traditional manual deburring operation seriously affects the assembly qual-ity and assembly efficiency, is time-consuming and costly, and is not conducive to aircraft automatic assembly based on industrial robot. In this paper, the formation of drilling exit burr and the influ-ence of interlayer gap on interlayer burr formation were studied, and the mechanism of interlayer gap formation in drilling stacked aluminum alloy plates was investigated, a simplified mathematical model of interlayer gap based on the theory of plates and shells and finite element method was established. The relationship between interlayer gap and interlayer burr, as well as the effect of feed rate and pressing force on interlayer burr height and interlayer gap was discussed. The result shows that theoretical interlayer gap has a positive correlation with interlayer burr height and preloading pressing force is an effective method to control interlayer burr formation.     

关于Caristi不动点定理的一点注记

本文利用半序方法给出了一个新的Caristi型不动点定理，与原有结果不同的是：在我们的定理中，不动点可以用迭代方法求出。     

航天器结构动态优化设计仿真技术

本文简要回顾了航天器结构设计技术的发展情况，说明结构动态实验仿真技术是结构动态优化设计仿真技术的基础，介绍了两种模态试验仿真技术与试验建模技术，给出捆绑式运载火箭试验仿真技术实例，指出振动试验仿真技术研究与应用已成为当前重要前沿课题。