正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

战术导弹控制系统滚动回路的一种设计方法

结合近程战术地地导弹控制系统滚动回路的设计，讨论了整个设计过程中的设计思路和设计方法。针对导弹的弹体滚动运动参数在较大范围内变化的特点，将回路校正网络设计为变参数校正网络。设计中，使用ＩＥＡＳ语言编程对滚动回路单通道和控制回路三通道进行计算机仿真，经多次协调设计，结果令人满意。给出了部分仿真结果。     

P1─—多面体的对偶图形的性质

本文研究了P1─—多面体与其对偶图形的对偶图形边长之间的关系问题．设P1─—多面体的边长为a，其对偶图形的对偶图形的边长为C，则其中θ1为多面体A的过顶点的相邻两校之间的夹角，θ2为多面体B的过顶点的相邻两校之间的夹角，取θ＝max｛θ1，θ1｝     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

捕风一号卫星总体设计与技术特点

捕风一号卫星是中国首次实现基于星载导航卫星反射信号测量(global navigation satellite system-reflection,GNSS-R)技术的气象卫星,采用新型L波段海面风场信息探测技术,在风场测量、海面飓风风速反演等方面为国家气象、防灾减灾等行业提供服务.从系统设计角度介绍了捕风一号卫星的总...     

基于DBN的不均衡样本驱动民航发动机故障诊断

在结合深度置信网络(DBN)、采样与集成技术的基础上,提出了基于不均衡样本驱动的民航发动机故障诊断模型。该模型通过分析民航发动机历史飞行数据,利用DBN提取性能参数中的内部特征,利用采样技术将不均衡样本均衡化,采用集成技术进行故障分类。将该模型应用到CFM56-7B系列发动机历史飞行数据,实验结果表明:与常用故障诊断方法相比,该模型的准确率高达0.996,AUC值高达0.948,可以有效处理民航发动机样本高维、不均衡问题。      

Computational engineering analysis of external geometrical modifications on MQ-1 unmanned combat aerial vehicle

This paper focuses on the effects of external geometrical modifications on the aerodynamic characteristics of the MQ-1 predator Unmanned Combat Aerial Vehicle (UCAV) using computational fluid dynamics. The investigations are performed for 16 flight conditions at an altitude of 7.6 km and at a constant speed of 56.32 m/s. Two models are analysed, namely the baseline model and the model with external geometrical modifications installed on it. Both the models are investigated for various angles of attack from −4° to 16°, angles of bank from 0° to 6° and angles of yaw from 0° to 4°. Due to the unavailability of any experimental (wind tunnel or flight test) data for this UCAV in the literature, a thorough verification of calculations process is presented to demonstrate confidence level in the numerical simulations. The analysis quantifies the loss of lift and increase in drag for the modified version of the MQ-1 predator UCAV along with the identification of stall conditions. Local improvement (in drag) of up to 96% has been obtained by relocating external modifications, whereas global drag force reduction of roughly 0.5% is observed. The effects of external geometrical modifications on the control surfaces indicate the blanking phenomenon and reduction in forces on the control surfaces that can reduce the aerodynamic performance of the UCAV.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

螺旋桨桨叶1P气动载荷研究

介绍了一种１Ｐ载荷实验研究方法－桨叶应变测试法,首先通过桨叶剖面速度三角形及气动力分析给出了１Ｐ载荷与测量应变的关系,然后通过地面试验和飞行试验进行了验证。试验结果表明,螺旋桨１Ｐ载荷主要由于非对称气流流过桨盘面改变了桨叶剖面速度三角形而引起,迎角,侧滑角的增加,会产生较大的１Ｐ载荷;机动飞行,如快速拉杆,荷兰滚等也会产生较大的１Ｐ载荷。     

猎鹰9号火箭发射及箭体复用的分析

猎鹰9号火箭截至2023年年底已完成286次发射。对猎鹰9号火箭特别是Block5版本火箭的发射情况进行了完整梳理统计,重点分析了一级箭体的复用情况以及发射、回收的相关能力保障,对火箭的经济性和未来前景作了预测。