飞机燃油系统地面模拟试验干扰的产生和处理

分析燃油地面模拟试验台测控系统在调试过程中模拟量输出信号出现大幅度波动的原因,介绍其处理过程及实际效果,指出在试验中应采取的措施。     

电压／频率变换电路实现A／D转换

数据的采集与处理广泛的应用在自动化领域中，由于应用的场合不同，对数据采集与处理所要求的精度也不相同。考虑到测量精度要求，详细的阐述了以MSP430F149为主控芯片的系统软硬件的研究、设计和实现，介绍了如何采用压控振荡器LM331与控制器MSP430F149内部Timer模块构成ADC，即线性放电法（威尔金逊法）ADC。     

Upwards migration phenomenon on molten lunar regolith: New challenges and prospects for ISRU

As part of our research on the feasibility of producing commodities from lunar regolith by thermal-driven processes with minimal terrestrial precursors we need to characterize, reproduce, and understand thermophysical properties of the molten regolith still unforeseen under the lunar vacuum conditions at a scalable sample size. Two unanticipated phenomena, apparently caused by lunar melt’s surface tension under vacuum, have been revealed in our research work, vacuum void formation and upwards migration. In this paper we present our findings and thinkable explanation on the upwards migration phenomenon experimentally observed and consistently replicated as JSC-1A lunar regolith simulant melted at high vacuum. Upwards migration of molten lunar regolith will make future lunar ISRU’s melting processes both challenging as molten bulk material would migrate upwards along the container’s walls, and also promising on new opportunities for alternative ISRU’s sustainable processes as regolith’s upwards migration takes place in uniformed thin-film pattern. Among the potential ISRU’s processes that might use controlled thermal thin-film-based migration without the necessity of terrestrial precursors are production of feedstock for 3D printing, fractional separation of regolith’s component’s (O₂, metals, and alloys) via pyrolysis, film coating, purification of valuables solid crystals including silicon, and fabrication of key elements for microfluidic, and MEMS devices. Thermal upwards migration phenomenon on JSC-1A’s melt is formulated and explained by the authors as due to thermal Marangoni effect (also known as thermo-capillarity) in which temperature gradients within the melt’s bulk and along the crucible’s wall yield the surface tension large enough to supersede the gravitational force and yield the experimentally observed upwards thin-film migration. As far as the authors know, upwards thermal migration of molten JSC-1A (or other lunar simulant regolith) under vacuum has not been reported in the literature. A thermal mathematical model accounting for thermal Marangoni effect on molten JSC-1A agrees with what experimentally was observed, the formation of the meniscus on the melt-wall surface interface along with an incipient upwards migration in thin-film pattern along the crucible wall that, according to the model, experiences large temperature gradient, an important factor to trigger the thermal Marangoni effect along with the fact that surface tension of the molten lunar regolith material is temperature dependent.     

“实践九号”A卫星光学遥感图像杂散光噪声去除

杂散光是影响卫星光学遥感图像像质的重要因素,严重时会在图像上形成明暗的杂散光条纹噪声,降低图像的对比度和清晰度。文章针对“实践九号”A（SJ-9A）卫星光学遥感图像存在的杂散光噪声现象,设计了一种基于成像载荷焦面入射杂散光空间分布特征的遥感图像杂散光条纹噪声去除方法,通过测量杂散光在推扫遥感图像上的空间分布特征,建立杂散光分布特征模型,采用分块自适应算法进行杂散光噪声滤波,消除SJ-9A遥感图像上随时空变化的杂散光条纹噪声。杂散光噪声去除后图像整体色调均匀,无条带噪声,满足CCD/TDI-CCD推扫遥感图像辐射校正精度（广义噪声）优于5%的指标要求。     

2198铝合金硫酸-己二酸阳极氧化膜耐蚀性

以2198铝-锂合金为研究对象,在硫酸-己二酸电解质溶液中进行阳极氧化,并对氧化后的试样进行沸水封闭处理。采用场发射扫描电子显微镜(FE-SEM)和原子力显微镜(AFM)对氧化膜的表面和截面的形貌进行观察。通过电化学阻抗谱(EIS)、塔菲尔(Tafel)曲线和浸泡实验来分析阳极氧化膜的耐蚀性能。结果表明铝-锂合金在阳极氧化过程中由于含铜合金相的影响,形成的氧化膜孔洞不完整出现连通现象;电化学测试结果表明封闭之后的氧化膜的耐蚀性明显提高,并且随着浸泡时间的延长拟合等效电路发生改变,同时多孔层和阻挡层的阻抗值在降低,说明在浸泡的过程中氧化膜的结构发生改变,耐蚀性降低。      

Computations of unsteady transonic flow over airfoil at low Reynolds number

Transonic flow over a thin airfoil at low Reynolds number was studied numerically by directly solving two-dimensional full Navier-Stokes equations through 5th order weighted essentially non-oscillatory(WENO) scheme without using any turbulence model.A series of distinguished unsteady phenomena for a thin 2-D transonic airfoil flow were presented.Due to continuous adverse pressure gradient in the subsonic flow downstream of the sonic line, the unsteady separated boundary layer with main vortex and secondary vortex was developed at the rear of the airfoil.At the trailing edge,the vortex-shedding was characterized by periodical connection of the main vortex and secondary vortex on the other side of the airfoil.The unsteady separation and vortex-shedding occurred with the same period.On the airfoil surface,the average pulse pressure related to the unsteady supersonic region was obviously smaller than that related to the vortex-shedding at the trailing edge.With the attack angle increasing from 0° to 2°, the frequency of vortex-shedding decreases about 4.2%.At last, the turbulence intensity and many second-order statistics in the wake region were investigated.      

GPS伪随机码畸变的建模与分析

建立了全球卫星定位系统(GPS)卫星C/A码畸变数学模型,推导了畸变后的C/A码的相关函数,在Matlab软件中进行仿真。结果表明:该模型能合理解释SVN19卫星的测距码畸变故障,并可作为未来伪随机信号畸变的一个合理模型,为导航信号的完好性监测提供理论支持。     

《爱犬弗拉狮传》的“戏仿”实验

研究伍尔夫颠覆传统传记的"戏仿"实验。在《爱犬弗拉狮传》中选择一条宠物狗作为传主,运用娴熟的操纵视角手法,以"戏仿"的方式,颠覆文坛沿袭的维多利亚传记传统。这种高超的叙事技巧证明伍尔夫不仅是一个艺术的讲故事者,还是一个才华横溢的维多利亚传记传统的反叛者。     

基于DSP的片外FLASH自举引导的实现

利用多通道缓冲串口McBSPO实现了TMS320VC5509A DSP与外部串行Flash的自举引导,完成了用DSP控制Flash进行在线系统编程,重点介绍了DSP与Flash接口电路的设计,同时对Flash的烧录过程及软件编程部分进行了详细说明.通过在实际工程中的应用验证,表明了该方案切实可行.