求解-维浅水波方程的中心差分格式

使用Haim Nessyahu和Eitan Tadmor给出的求解双曲型守恒律的中心差分交错格式求解浅水波方程,经一维溃坝问题数值实验验证了该格式对于求解浅水波方程的可行性和有效性。     

Retrieval of vegetation equivalent water thickness from reflectance using genetic algorithm (GA)-partial least squares (PLS) regression

This study aimed to investigate the performance of genetic algorithms coupled with partial least squares (GA-PLS) modeling of spectral reflectance in retrieving equivalent water thickness (EWT) at leaf and canopy level. A genetic algorithm was used to identify a subset of spectral bands sensitive to the variation in EWT, and PLS was then applied to relate the identified bands to EWT values. GA-PLS was applied to leaf level reflectance available from LOPEX dataset, and canopy data includes reflectance simulated by a leaf radiative transfer model PROSPECT and a canopy radiative transfer model SAILH and acquired by airborne visible/infrared imaging spectrometer (AVIRIS). The results indicate that GA-PLS has the capability of retrieving EWT from leaf and canopy reflectance, and achieved good estimation accuracy, i.e. low root mean square errors (RMSE) and high squared correlation coefficients (R²). For the retrieval at leaf level, the estimation accuracy can be as good as RMSE = 0.0019 g/cm² and R² = 0.939 or better. For the retrieval at canopy level, the model accuracy is RMSE = 0.0061 g/cm² and R² = 0.966 or better when PROSPECT-SAILH simulated reflectance was used; when AVIRIS image spectra were used, the model accuracy is RMSE = 0.0094 g/cm² and R² = 0.8734 for the calibration, and RMSE = 0.0132 g/cm² and R² = 0.7756 for the validation. These results from GA-PLS modeling support the conclusion that GA-PLS has the potential to be applied to AVIRIS, Hyperion and HyMap imagery for retrieving EWT. The selected bands for the AVIRIS datasets differ from those for the LOPEX and PROSPECT-SAILH simulated datasets, and this inconsistence of the selected bands for different datasets indicates that the GA-PLS method has the advantage of tuning the optimum bands for PLS regression and accommodating the effects of confounding factors.     

鼓形环油膜特性阻抗矢量分析

分析了鼓形环油膜特性，引用Ｄ．Ｃｈｉｌｄｓ和Ｈ．Ｍｏｅｓ等对柱形环油膜阻抗矢量分析方法，推导鼓形环油膜阻抗矢量，阀导出鼓形环油膜刚度和油膜阻尼的瞬时一般表达式。这为进一步研究具有鼓形环油膜的转子系统的动力稳定性问题提供了分析基础。     

高超声速气流中平板上粘滞激波层的数值研究(英文)

本文描述绕锐前缘平板高超声速流动的数值模拟结果。对完全粘滞激波层的数值模拟进行了逐次校验。计算出的密度分布型式、激波倾斜和斯坦顿数与其他作者的理论和实验数据进行了比较。得到了近似传热系数计算结果的经验相关式。     

Analysis on capabilities of density-based solvers within OpenFOAM to distinguish aerothermal variables in difusion boundary layer

Open source feld operation and manipulation（OpenFOAM）is one of the most prevalent open source computational fluid dynamics（CFD）software.It is very convenient for researchers to develop their own codes based on the class library toolbox within OpenFOAM.In recent years,several density-based solvers within OpenFOAM for supersonic/hypersonic compressible flow are coming up.Although the capabilities of these solvers to capture shock wave have already been verifed by some researchers,these solvers still need to be validated comprehensively as commercial CFD software.In boundary layer where diffusion is the dominant transportation manner,the convective discrete schemes＇capability to capture aerothermal variables,such as temperature and heat flux,is different from each other due to their own numerical dissipative characteristics and from viewpoint of this capability,these compressible solvers within OpenFOAM can be validated further.In this paper,frstly,the organizational architecture of density-based solvers within OpenFOAM is analyzed.Then,from the viewpoint of the capability to capture aerothermal variables,the numerical results of several typical geometrical felds predicted by these solvers are compared with both the outcome obtained from the commercial software Fastran and the experimental data.During the computing process,the Roe,AUSM＋（Advection Upstream Splitting Method）,and HLLC（Harten-Lax-van Leer-Contact）convective discrete schemes of which the spatial accuracy is 1st and 2nd order are utilized,respectively.The compared results show that the aerothermal variables are in agreement with results generated by Fastran and the experimental data even if the1st order spatial precision is implemented.Overall,the accuracy of these density-based solvers can meet the requirement of engineering and scientifc problems to capture aerothermal variables in diffusion boundary layer.     

尾迹对涡轮动叶全表面气膜冷却效率的影响

采用压敏漆（PSP）测量技术研究了尾迹对涡轮动叶气膜冷却效率的影响，测试叶片带有11排圆柱形气膜孔。获得了不同质量流量比和尾迹斯特劳哈尔数（Sr=0，0.12，0.36）条件下全表面气膜冷却效率分布的试验数据，结果表明：随着尾迹Sr数的增加，叶片前缘区域径向平均气膜冷却效率最大降低幅度达36.5%，吸力面径向平均气膜冷却效率最大降低幅度达53.5%，压力面径向平均气膜冷却效率最大降低幅度达24.2%；尾迹对前缘和吸力面气膜冷却效率的影响大于压力面；随着质量流量比增加，尾迹的影响减小；在进行涡轮动叶表面气膜冷却结构设计时，不考虑尾迹效应会增加设计风险。     

汕头大学大气边界层风洞的设计和研制

介绍了汕头大学大气边界层风洞和其配制的测控系统及流场校测结果。汕大风洞主要做建筑物的抗风实验和风环境实验。为模拟大气边界层，实验段较长，实验模型放在实验段后部。为减小轴向静压梯度顶板高度分段可调。风速比航空凤洞低。配置了建筑物测压和测力实验所需的电子压力扫描测量系统和高频底座天平。流场校测表明，该风洞的气动性能已达合同规定的指标。     

廊坊市市区水资源规划治理研究

水资源是人类赖以生存的资源,现今,水资源已成为制约我国民经济发展的障碍,如何在充分利用水资源、保护水资源的基础上发展经济,是实现可持续发展的重要条件。本文通过对废水排放量和规划用水量的预测,对廊坊市未来的水资源利用规划提出建议,实现可持续发展。     

挤压油膜阻尼器失效边界探索

挤压油膜阻尼器设计不当，会导致功能失效。创建了弹支挤压油股阻尼器的双稳态区域图和减振失效边界围。只要轴承参数B和质量估心率U值不在双稳态区域内，便不会出现双稳态特性；离开诚振失效的边界，便可有效的减振。研制挤压油膜阻尼器时，应用此二图，可以带来很大的方便。     

航空航天用热固性二硫化钼干膜润滑剂的研制

采用酸酐、601和618混合环氧树脂、胶体二硫化钼及特殊溶剂和添加剂等制备成的热固性二硫化钼干膜润滑剂,涂层经200℃、固化2h后形成了润滑减摩层。结果表明,其膜层不仅附着力、防腐性、耐高低温性及耐液体介质性好,而且在热真空环境下工作性能稳定、摩擦系数低、耐磨寿命长。