落儿岭-土地岭断裂几何结构及晚第四纪活动特征初探

落儿岭-土地岭断裂是东大别地区重要的发震构造,然而限于自然地理条件等因素,前人对其的研究并不充分。本文以发生多次中强地震的落儿岭-土地岭断裂为研究对象,在高精度卫星影像解译的基础上,通过详细的野外地质地貌调查,尤其是对典型断层剖面进行分析,研究落儿岭-土地岭断裂的断错地质地貌特征、几何结构及活动特征。通过野外调查并结合其他资料分析认为落儿岭-土地岭断裂为发育于大别造山带内部的一条走向NE、向NW陡倾的断裂带。依据地质地貌特征及地震活动性,断裂可以划分为杨树沟-黑石渡段和黑石渡-横塘岗乡段两个几何段落。断裂最新活动时代为中更新世晚期—晚更新世早期,断裂最新活动继承了中生代以来的运动方式,以兼具右旋走滑的拉张正断为主。     

Estimation of probability of occurrence of F1 layer or L condition using tables and electron density profile models

An algorithm is proposed for evaluation of the probability of occurrence of an F1 layer or L condition, based on tables. Observations independent of the tables database are used for comparison between the estimated probability of occurrence, the formulation used at present in IRI, and the occurrence actually observed. The importance of the inclusion of L condition in the electron density profile model is shown.     

Comparing topside and bottomside-measured characteristics of the F2 layer peak

The ionospheric characteristics of the F2 layer peak have been measured with ionosondes from the ground or with satellites from space. The most common characteristics are the F2-peak density NmF2 and peak height hmF2. In addition to these two parameters this paper studies the F2-peak scale height. Comparing the median values of hmF2 and NmF2 obtained from topside and bottomside sounding shows good agreement in general. The Chapman scale height values for the F2 layer peak derived from topside profiles, H_m,top, are generally several times larger than H_m,bot derived from bottomside profiles.     

活塞裙部外圆复杂型面在位检测及其误差修正

提出了一种基于Windows环境下的活塞裙部外圆复杂型面在位检测的新方法,并设计了在位检测的软、硬件系统.同时,根据活塞裙部型面的特点,在现有常用误差处理算法的基础上进行了改进,新的误差处理方法具有更强的适用性.     

回流焊温度曲线热容研究

本文全面的分析了回流焊温度曲线在回流焊工艺中的作用，回流焊工艺的工艺特点、影响回流焊温度曲线的各种因素。如何从热容的思想建立回流焊温度曲线的方法？如何调整温度曲线通过控制温度曲线改善工艺过程，减少回流焊工艺的缺陷？     

Physiologic and metabolic responses of wheat seedlings to elevated and super-elevated carbon dioxide

The metabolic consequence of suboptimal (400 μmol mol⁻¹ or ppm), near-optimal (1500 ppm) and supra-optimal (10,000 ppm) atmospheric carbon dioxide concentrations [CO₂] was investigated in an attempt to reveal plausible underlying mechanisms for the differential physiological and developmental responses to increasing [CO₂]. Both non-targeted and targeted metabolite profiling by GC–MS and LC–MS were employed to examine primary and secondary metabolites in wheat (Triticum aestivum, cv Yocoro rojo) continuously exposed to these [CO₂] levels for 14, 21 and 28 days. Metabolite profile was altered by both [CO₂] and physiological age. In general, plants grown under high [CO₂] exhibited a metabolite profile characteristic of older plants under ambient CO₂. Elevated [CO₂] resulted in higher levels of phosphorylated sugar intermediates, though no clear trend in the content of reducing sugars was observed. Transient starch content was enhanced by increasing [CO₂] to a much greater extent at 10,000 ppm CO₂ than at 1500 ppm CO₂. The percentage increase of starch content resulting from CO₂ enrichment declined as plants develope. In contrast, elevated [CO₂] promoted the accumulation of secondary metabolites (flavonoids) progressively to a greater extent as plants became mature. Elevated [CO₂] to 1500 ppm induced a higher initial growth rate, while super-elevated [CO₂] appeared to negate such initial growth promotion. However, after 4 weeks, there was no difference in vegetative growth between 1500 and 10,000 ppm CO₂-grown plants, both elevated CO₂ levels resulted in an overall 25% increase in biomass over the control plants. More interestingly, elevated atmospheric [CO₂] reduced evapotranspiration rate (ET), but further increase to the supra-optimal level resulted in increased ET (a reversed trend), i.e. ET at 1500 ppm < ET at 10,000 ppm < ET at 400 ppm. The differential effect of elevated and super-elevated CO₂ on plants was further reflected in the nitrogen dynamics. These results provide the potential metabolic basis for the differential productivity and stomatal function of plants grown under elevated and super-elevated CO₂ levels.     

基于任务段的航空发动机载荷谱聚类方法

针对航空发动机飞行任务剖面分类问题,对发动机31个飞行任务剖面进行了聚类分析。选取飞行高度和飞行马赫数作为划分飞行任务剖面的参数, 依据其对应的飞行任务段均值生成聚类散点图,将剖面类型划分为5大类。结果表明:低空低速剖面在无量纲飞行高度为0~0.2、飞行马赫数为0.4~0.6区间,均值最低;高空高速剖面在无量纲飞行高度为1.2~2.2、飞行马赫数为1.0~1.8区间,均值最高;飞行任务剖面在无量纲飞行高度为0.2~1.2、飞行马赫数为0.6~1.0区间内最为集中;针对散点密集区域,可依据剖面特征进一步划分剖面类型;不同剖面间,飞行高度与飞行马赫数差异性强,利于剖面划分,而法向过载与转速差异性小,不利于剖面的划分。所提出的方法可以快速有效的对航空发动机飞行任务剖面进行聚类分析。      

大涵道比风扇设计技术发展趋势

风扇部件是民用涡扇发动机关键部件之一,自20世纪60年代以来在气动设计等方面发生了显著变化,其发展支撑了民机的更新换代。对民机风扇叶片的发展历史进行了回顾,对典型设计特征和参数进行了总结。着重介绍了民机风扇叶片的叶片数、叶尖切线速度、气动叶型设计、降噪设计、材料工艺等发展变化,对其内在原因进行了分析,并评述了其发展趋势。     

电极面型对横向激励高气压CO2激光器放电的影响

计算并讨论了均匀场电极中电极板安装结构、电极板厚度对实际电场分布影响。计算表明在基本参数类似的条件下,近罗可夫斯基电极表面电场强度具有17%的非均匀性,但在垂直放电方向的对称面上却有更好的均匀性。对放电区辉光的时间积分照片和像增强型CCD相机记录的瞬态照片进行了分析,结果表明:电极表面的电场强度分布,仅对放电的初始发展具有影响,而放电区中央的电场分布以及预电离强度,对最终放电区的均匀性具有决定性的影响。     

液态聚硫橡胶模塑成型技术

从工艺方法选择、模具结构、脱模剂选用、工艺参数确定等方面介绍了液态聚硫橡胶XM-23模塑成型飞机座舱密封型材的制造技术.