多机并联火箭羽流流场及其底部热环境分析

For the problem that the plume flow field structure of a multi engine parallel rocket is complicated and the bottom thermal environment is extremely harsh, which may cause the failure of the engine structural components, the plume flow field and thermal environment at different altitudes are studied through numerical simulation. The result is compared with the measured results in flight which shows that when the rocket is flying at a low altitude, the plume of the engines do not interfere with each other. As the flight altitude increases, the plumes gradually expand and begin to interfere with each other, and finally there is an obvious backflow at the bottom of the rocket. The maximum heat flux at the moment of take off is basically the same as the measured value in flight. Before the backflow occurs, the heat flux mainly consists of radiant heat, the convective heat flow increases as the flight altitude grows, but it is also much smaller than the peak heat flow at takeoff. The result has certain guiding significance for the optimal design of engine structure thermal protection.     

Numerical simulations of water spray on flame deflector during the four-engine rocket launching

This paper aims to study on the cooling effect with two types of water spray nozzle on the flame deflector during the four-engine launch vehicle take-off. To accurately simulate the two-phase flow of the rocket gas with multispecies and the water spray, the three-dimensional compressible Navier-Stokes equations, discrete ordinates methods and realizable k-Ɛ turbulence model are used to establish the rocket supersonic plumes impact model. The Eulerian dispersed phase (EDP) model was used to simulate the water spray into the exhaust gas. The accuracy and effectiveness of the gas-liquid flow model are verified by a good agreement between simulation results and experimental data. On this basis, a series of numerical simulation studies under different water injection position are performed. The results show that the high temperature regions, along the axis of engines on the deflector plate, have no significant temperature decreasing effect by water spray from the nozzles mounted on the apex of the deflector, and the high temperature converts a large quantity of water into vapor near the plume boundary, which would decrease the flow conductivity. With the cooling spray nozzle fixed directly to the deflector plate, the temperature decrease effect is obvious and the effect of thermal shock on deflector plate induced by exhaust plume is reduced, so that it can prevent the flame deflector from thermal ablation. The study results provide indepth information and engineering guidance for designing the water spray systems and increasing the safety of the launch process.     

复杂电磁环境下无线接收机电磁兼容快速测试技术应用CSCD

复杂射频电磁环境下,无线接收机作为主要的敏感设备,其电磁兼容性直接影响着整个武器装备的电磁兼容特性. 本文针对GJB 151B中对于接收机非线性测试方法的局限性,引入了一种利用自动双频测试系统对接收机干扰响应的快速测试方法;并搭建了实验室半实物仿真测试平台,检测了某接收机在（ 4-6 ） GHz组合频率干扰下的所有非线性的干扰响应通道. 测试结果对于评估接收机及其所在系统的外部电磁环境适应性具有重要参考价值.     

WC/C复合涂层海水环境的耐蚀性与摩擦性能

采用非平衡磁控溅射技术在304L不锈钢和单晶硅基底上沉积WC/C多层复合涂层,利用扫描电镜、Raman光谱仪、X射线衍射仪等研究WC/C复合涂层的微观结构,采用纳米压痕仪、划痕测试系统测试涂层的力学性能,利用电化学测试系统和摩擦磨损试验机分别研究涂层在人工配置的海水环境的耐蚀性能和摩擦性能。结果表明:WC/C复合涂层内含有较多类石墨sp2键结构,存在WC1-x相并镶嵌在非晶碳基质中。较之于304L不锈钢基底,WC/C复合涂层在海水环境中表现出更好的耐蚀性与更优异的摩擦适应性。     

波音健康管理工程环境浅析

健康管理工程环境(HMEE)是由项目分析与建模环境、开发环境、使用环境等三部分构成的一个开放式健康管理集成与实验平台,将来自于工业部门、学术界以及政府技术基地的健康管理技术集成起来,转化成成熟、实用的飞行器综合健康管理(IVHM)系统.本文简要介绍了构成HMEE的三部分的目标和功能,以及所提供的相关工具、技术和过程.     

廊坊市新农村建设中的生态环境存在的问题及对策

和全国其他地方一样,廊坊市在大力推进社会主义新农村建设的过程中,也面临着农村生态环境恶化的困境。为了实现农业生产发展和农村生态环境保护之间的平衡,政府应当加大公共财政支出向农村地区倾斜的力度,坚持规划先行、服务跟进的原则,切实改善人居环境,强化农村生态环境保护法制的实施,把新农村建设成为生态良好的新农村。     

野战环境下大型飞机超低空气动特性分析

针对野战环境下的大型飞机超低空飞行,采用CFD方法对地面存在前向或横向不对称障碍物时地面效应对气动参数的影响进行了数值分析,包括纵向稳定性和侧向摇晃等问题.研究结果表明,野战等非常规飞行条件下,地面不确定障碍物会造成大型飞机稳定性变差,严重时可能出现纵向点头和横侧向摇晃现象,容易导致触地危险.最后,从现代飞行控制理论角度提出了对常规布局大型飞机进行闭环控制的研究思路.     

电子辐照对聚乙烯热缩套管力学性能的影响

利用45 keV,1 MeV和2 MeV电子分别对聚乙烯热缩套管进行辐照实验,研究不同能量电子辐照对聚乙烯热缩套管力学性能的影响,并分析电子辐照下材料的损伤效应机理,建立力学性能退化规律。结果表明：实验选定的3种能量电子辐照都会造成聚乙烯的降解,材料脆化产生裂纹,从而导致其力学性能下降;但是由于这3种能量电子穿透深度不同,45 keV电子只能造成聚乙烯热缩套管表层材料损伤,力学性能最大下降量只有30%~40%,而1 MeV和2 MeV电子却会导致套管力学性能完全丧失,力学性能下降接近100%。     

导流槽构型对火箭起飞时流场和声场的影响

为了研究四喷管运载火箭起飞时火箭周围噪声环境问题,建立燃气/空气双组分的可压缩流动模型,采用2阶Roe格式、SAS(scale-adaptive simulation)湍流模型和声学类比积分法Ffowcs-Williams Hawkings(FW-H)求解三维Navier-Stokes方程。以单机火箭的噪声问题为对象开展数值模拟,并将噪声数值计算结果与试验数据对比,误差在3dB以内(相对误差小于1.6%),验证预测噪声方法的有效性,进而研究四喷管运载火箭起飞阶段采用不同导流槽构型对箭体舱段区域噪声环境的影响,结果表明:在相同噪声接收点处,单侧导流槽对应的总声压级比双侧导流槽大,两者的总声压级(OASPL)之差最大为10.7dB。另外,当采用单侧导流槽时,沿周向接收点的噪声总声压相对单侧导流槽中心截面呈对称分布,而且沿导流出口方向逐渐增大。所建立的噪声数值方法为大推力捆绑运载火箭舱段的噪声环境预测及其控制提供一定参考。