超燃冲压发动机前体边界层转捩风洞试验方法

吸气式高超声速飞行器前体边界层强迫转捩研究是各国高超声速研究计划的重要内容之一。本文归纳总结了美国开展Hyper-X前体边界层强迫转捩研究风洞设备的选则依据和选用的主要风洞;归纳了各风洞在超燃冲压发动机前体边界层强迫转捩试验中采用的主要测量和显示技术;分析了强迫转捩扰流装置设计过程中,风洞试验研究采用的方法。     

SPH方法对气液两相流自由界面运动的追踪模拟

气液两相流动是自然界中常见的流动现象,对其进行数值模拟时要求必须能够准确跟踪界面运动变形。本文利用光滑粒子流体动力学方法,结合微可压缩模型(SCM),引入界面控制方法XSPH速度修正以及Van Derwaals状态方程修正,对典型的气液两相流动如二维溃坝、气泡上浮等问题进行了数值模拟,分析了空气和水相互作用机理以及界面运动规律,并同实验结果和其他数值计算结果进行了比较。结果表明,该方法在模拟多相介质界面运动问题准确有效,可用于处理更为复杂的多相流动工程问题。     

考虑激波串的超声速燃烧流场分析模型

发展了一种考虑激波串结构的超声速燃烧流场分析模型,以应用于吸气式高超声速飞行器的设计优化过程。模型通过求解耦合有限速率化学反应的刚性常微分控制方程组来描述燃烧室内点火、燃烧等气动热力现象,采用Billig激波串模型模拟燃烧高压前传过程。采用该模型对"等直段+扩张段"、"后向台阶"和"支板喷射"三种典型构型燃烧室流场进行了计算。结果表明:所建模型正确地反映了超声速燃烧室流动中的物理化学过程;与实验数据比较,模型计算出的壁面压力分布比没有考虑激波串结构的模型符合的更好。     

FGH96涡轮盘低循环疲劳寿命分析技术与试验

分析FGH96涡轮盘的尺寸效应,分析了分别适合于FGH96亚尺寸盘和全尺寸盘的低循环疲劳寿命预测方法.成功设计了FGH96亚尺寸盘、全尺寸裂纹扩展盘试验件;通过低循环疲劳试验,展现了两种不同的低循环疲劳失效机理,验证了提出的低循环疲劳寿命预测方法;通过裂纹扩展试验,获得了FGH96全尺寸轮盘的裂纹扩展特性,揭示了FGH96全尺寸涡轮盘与紧凑拉伸试样裂纹扩展特性具有显著差别的客观规律;获得FGH96全尺寸涡轮盘580℃损伤容限值,明确某发动机高压涡轮盘损伤容限水平.      

基于复合疲劳试验的涡轮叶片振动应力反推法

提出了一种利用复合疲劳试验和外场故障数据反推涡轮叶片实际振动应力的方法.该方法针对与故障叶片同批次的叶片,开展数个振动应力水平下的单件试验和某一特定振动应力水平下的成组试验,利用极大似然法推导出叶片的概率-应力-寿命曲线(P-S-N);最后基于99.87%存活率下的概率-应力-寿命曲(P_99.87%-S-N),结合叶片的外场故障统计结果,反推出叶片实际工作中振动应力的范围和可能的最大振动应力.      

基于气动热力模型的FADEC系统FHA方法

从适航规章对全权限数字发动机控制(full authority digital engine control,简称FADEC)系统的安全要求出发,结合功能危险分析(functional hazard assessment,简称FHA)的一般原则和FADEC系统的特点,得到了FADEC系统FHA的分析要素.根据分析要素中的工具与数据需求,将航空发动机气动热力模型用于可调放气活门(variable bleed valve,简称VBV)控制功能失效危险分析,结果表明:①该模型能够辅助确定FADEC系统功能失效的发动机影响;②FADEC系统功能危险的模型分析方法通过定量分析确定发动机影响的危险等级,为FHA提供直观的参考依据,可作为对专家经验的补充.      

MIMO变结构飞行重构控制系统设计

基于滑模变结构控制,提出一种MIMO(multiple input multiple output)的飞行重构控制系统的频域设计方法.将滑模变结构控制与飞行重构控制相结合,解决了飞行重构控制技术中故障检测和系统参数辨识的问题.引入渐近观测器和hedge模型增加重构控制系统对衍生未建模动态的鲁棒性;引入作动器模型、输出饱和限制和驾驶员模型,使变结构重构控制系统设计方法变得更为有效和实用;以某型飞机的横航向飞行控制系统为例,进行设计模拟.结果表明:在飞机气动参数大幅突变和操纵面严重受损的情况下,飞机仍能保持良好的性能.      

Day-to-day variability of equatorial anomaly in GPS-TEC during low solar activity period

The ionospheric total electron content (TEC) in the northern hemispheric equatorial ionization anomaly (EIA) crest region is investigated by using dual-frequency signals of the Global Positioning System (GPS) acquired from Rajkot (Geog. Lat. 22.29°N, Geog. Long. 70.74°E; Geom. Lat. 14.21°N, Geom. Long. 144.90°E), India. The day-to-day variability of EIA characteristics is examined during low solar activity period (F10.7∼83 sfu). It is found that the daily maximum TEC at EIA crest exhibits a day-to-day and strong semi-annual variability. The seasonal anomaly and equinoctial asymmetry in TEC at EIA is found non-existent and weaker, respectively. We found a moderate and positive correlation of daily magnitude of crest, Ic with daily F10.7 and EUV fluxes with a correlation coefficient of 0.43 and 0.33, respectively indicating an existence of a short-term relation between TEC at EIA and the solar radiation even during low solar activity period. The correlation of daily Ic with Dst index is also moderate (r = −0.35), whereas no correlation is found with the daily Kp index (r = 0.14) respectively. We found that the magnitude of EIA crest is moderately correlated with solar flux in all seasons except winter where it is weakly related (0.27). The magnitude of EIA crest is also found highly related with EEJ strength in spring (r = 0.69) and summer (r = 0.65) than autumn (0.5) and winter (r = 0.47), though EEJ is stronger in autumn than spring.     

GNSS-R concept extended by a fine orbit tuning

Small changes in semimajor axis of the orbits selected for the GNSS-R [R as Reflectometry] satellites, so-called fine orbit tuning, known from the ESA’s Gravity and steady-state Ocean Circulation Explorer mission, can dramatically increase the number of nadir and off-nadir reflecting points and, in turn, can enhance the capability of the concept of bistatic altimetry (GNSS Reflectometry) without additional costs. The application of our suggestion is feasible for a satellite which will be equipped by thrusters for the orbit keeping. During the mission lifetime several orbit tunings are feasible, just to transfer from one to another orbit. Then we can study short-periodic or longer-periodic features, according to scientific goals defined for the mission. The shortest cycles (few days), corresponding to the required revisit time (defined by ESA), may be subcycles of much longer cycles (repeat periods).     

洞映射方法的研究和改进

针对传统洞映射方法存储大的缺点,对"广义封闭"的概念进行扩展,提出了最小洞映射方法,该方法允许挖洞曲面结束于网格截断面,有效缩小了洞映射区域,节省了存储开销.对适用于广义封闭的洞映射单元识别方法进行了分析,指出了用物面信息判断映射单元属性可靠性较差.发展了一种新的特别适合广义封闭问题的识别方法:"Inverse mark",使用计算网格结点信息自动识别洞外单元,再作为初始点在网格内部推进.研究表明:"Inverse mark"方法计算效率高,可靠性好,自动化程度高,有效提高了重叠网格方法对缝隙等局部复杂结构的适应性