地效飞行器机翼气动性能数值分析

选取NACA5312翼型,利用Fluent软件．采用有限体积法,求解定常可压缩流动的质量加权平均N-S方程和标准κ-ε湍流模型,数值模拟地效飞行器在不同高度、速度及飞行迎角下的飞行状态。对比无界流场,研究了在地效作用下,气动特性与迎角、来流速度以及相对飞行高度的关系。     

聚邻乙氧基苯胺/ Fe3 O4 复合薄膜的制备及吸波性能

采用静电自组装技术,以化学氧化法合成的聚邻乙氧基苯胺和水热法制备的Fe3O4磁流体为原料,制备了聚邻乙氧基苯胺/Fe3O4复合薄膜,并采用SEM、FT-IR和矢量网络分析仪等手段表征了复合薄膜的形貌及电磁参数随频率的变化关系,对其微波吸收性能进行了初步研究.结果表明:制得的复合薄膜呈片状结构,吸波性能主要靠磁损耗,且在较低频率范围(8～10 GHz)内,薄膜厚度d为3.5mm时吸波效果较佳,反射率最低可达-11.5 dB;在较高频率范围(10～12.5 GHz)内,d为2.5 mm时吸波效果较佳,反射率最低为-10.4dB.     

无人直升机安全性思考

通过对美国民用直升机的故障分析,阐述了无人直升机系统设计、使用和管理中存在的安全隐患及其存在的原因,提出了提高无人直升机系统安全性的主要措施.从使用者的角度为无人直升机系统的设计、使用和管理者提供一些有关安全性的参考.     

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

The South Pole-Aitken basin region,Moon: GIS-based geologic investigation using Kaguya elemental information

Using Geographic Information Systems (GIS), we performed comparative analysis among stratigraphic information and the Kaguya (SELENE) GRS data of the ∼2500-km-diameter South Pole-Aitken (SPA) basin and its surroundings. Results indicate that the surface rock materials (including ancient crater materials, mare basalts, and possible SPA impact melt) are average to slightly elevated in K and Th with respect to the rest of the Moon. Also, this study demonstrates that K and Th have not significantly changed since the formation of SPA. The elemental signatures of the impact basin of Fe, Ti, Si, O through time include evidence for resurfacing by ejecta materials and late-stage volcanism. The oldest surfaces of SPA are found to be oxygen-depleted during the heavy bombardment period relative to later stages of geologic development, followed by both an increase in silicon and oxygen, possibly due to ejecta sourced from outside of SPA, and subsequent modification due to mare basaltic volcanism, which increased iron and titanium within SPA. The influence of the distinct geologic history of SPA and surroundings on the mineralogic and elemental abundances is evident as shown in our investigation.     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

微型定容多次燃油喷射系统高速响应特性仿真

针对小排量发动机转速范围大、工作循环喷油量小的特点,提出了一种微型定容多次燃油喷射系统结构,建立了系统电、磁、液、机耦合模型,仿真计算了从输入电压到喷射输出的动态响应特性,分析了影响系统高速特性的关键因素.结果表明:该喷射系统响应频率可达到1000Hz,响应时间可以满足小排量发动机最高转速要求,具备工程可实现性.      

气膜约束对轴系固有频率影响的试验

对10kg转子进行自由状态和有气膜约束两种状态下的试验模态分析,试验结果给出了转子平动、锥动和一阶弯曲时的固有频率及其振型等模态参数,分析了轴承供气压力变化对轴系固有频率的影响.进行了轴系升降速试验,结果表明:气膜约束下的模态分析结果比自由状态下的更接近于升降速试验的结果.试验结果为气体轴系固有频率的确定以及控制参数的选取提供了依据,也为下一步轴系振动控制奠定了基础.      

低速单级轴流压气机自引气扩稳实验

在一台低速单级轴流压气机上采用自引气-喷气方式进行了实验研究,实验中分析比较了不同的引气方式对压气机失速裕度改善(SMI)以及对压气机效率的影响,同时对不同自引气方式的扩稳机理进行了探讨.实验结果表明:自引气方式能够有效的改善压气机失速裕度,并且能够略微提高压气机效率.与传统的外部引气相比,节省了外部引气所需要的外部空气压缩系统;为自引气在实际压气机稳定性控制中的应用提供参考.