航空发动机性能恢复控制方法

针对航空发动机部件蜕化导致性能变差问题,设计了航空发动机性能恢复控制系统,系统根据发动机的工作状态以及健康状态在常规转速控制模式、稳态性能恢复控制模式和加速性能恢复控制模式之间切换.稳态性能恢复控制模式在常规转速控制模式的基础上设计了一个外环控制回路,通过自适应修正稳定状态下压气机转速指令达到蜕化发动机性能恢复的目的;加速性能恢复控制模式通过综合常规转速控制方法和喘振裕度控制方法,在保证发动机气动稳定的同时,充分挖掘发动机潜力,从而达到恢复蜕化发动机加速性能的目的.通过不同状态不同部件蜕化下的仿真结果表明恢复蜕化发动机性能的有效性.      

基于SVM辨识的涡扇发动机全包线稳态控制方法

针对涡扇发动机全飞行包线范围稳态最优控制器的设计问题,首先根据不同飞行条件下发动机各工作状态的稳态“小偏差”线性模型,采用线性二次型调节器(LQR)分别设计得到相应的发动机最优线性控制器参数,然后将所得到的线性控制器用支持向量机方法进行非线性逼近,得到控制器参数的支持向量机辨识模型,以满足发动机全包线、全状态稳态控制的需要.支持向量机模型的输入为飞行高度、马赫数和稳态转速,输出为线性控制器参数.应用实例表明:该方法在全包线范围内对发动机最优稳态控制器的逼近误差均在2%以内,能较好满足控制精度要求.      

微量Al 掺杂对2D C/ SiC 性能的影响

以二维编织碳纤维碳布为预制体,采用聚铝碳硅烷(PACS)为聚合物前驱体,应用化学气相渗透(CVI)结合聚合物浸渗-裂解(PIP)工艺制备微量Al掺杂2D C/SiC复合材料。研究微量Al掺杂对C/SiC微观结构、力学、热膨胀和氧-乙炔焰烧蚀性能的影响。结果表明:掺杂微量Al未改变C/SiC的微观结构和热膨胀性能,也未降低其韧性和强度;但微量Al掺杂提高了C/SiC的抗烧蚀性能,含微量Al的SiC氧化形成微量Al熔于SiO2的固熔体,微量Al提高了SiO2的黏度和致密度,减小SiO2挥发,较未掺杂Al的C/SiC相比,线烧蚀率降低了26%。     

基于LabWindows/CVI的IGS实时数据自动下载软件开发

随着全球导航卫星系统（GNSS）的日益发展,国际GNSS服务组织（IGS）所产生的各项数据以及产品日趋精确,应用也非常广泛。本文基于Labwindows/CVI开发平台,设计了从IGS的FTP服务器下载实时数据或产品的自动运行软件。该软件目前运行稳定、可靠,可以为IGS数据或产品的使用者提供自动化服务。     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

超燃冲压发动机准一维建模研究

在准一维流理论的基础上,考虑了燃料流量、截面变化、壁面摩擦、燃烧效率、化学反应放热等因素,应用影响系数法,构建了包括前体/进气道、隔离段、燃烧室、后体/尾喷管的超燃冲压发动机内流场准一维分析模型,可快速计算发动机参数沿轴向的变化以及出口值,便于发动机性能分析;以一个机体/推进一体化单模块飞行器为研究对象,通过与三维CFD数值模型进行对比。结果表明,准一维计算模型能较好地对超燃冲压发动机进行快速计算与分析,在超燃冲压发动机的初步研究阶段具有重要的应用价值。     

穿刺结构参数对C/C复合材料拉伸性能的影响

采用不同间距、不同根数的纤维束穿刺成型炭纤维预制体,经进一步化学气相沉积、沥青浸渍-高压炭化致密制备穿刺C/C复合材料。拉伸性能测试结果表明,穿刺间距2.1mm、穿刺束纤维根数为12K的C/C复合材料获得高的拉伸强度,Z向拉伸强度131.4MPa,XY向拉伸强度111.3MPa;随着穿刺间距减小、穿刺丝束纤维根数增加,Z向纤维含量增加,Z向拉伸强度明显提高。穿刺C/C复合材料1800℃真空条件下的拉伸强度与室温相当,拉伸模量低于室温,延伸率高于室温;常温拉伸断口较平整,且纤维/基体间的裂纹明显,而高温拉伸断口参差不齐,纤维及基体断面粗糙,呈现出假塑性断裂特征。     

固液混合火箭发动机缩尺效应研究

全尺寸固液混合火箭发动机试验耗费大,通常采用缩比发动机进行试验。为确保缩比试验代替全尺寸试验的准确性和有效性,对固液混合火箭发动机进行了相似性理论研究。结果表明当缩尺发动机与全尺寸发动机几何相似、采用相同的氧化剂和燃料组合,且氧化剂流率与药柱内径比值相同时,理论上缩比试验一定程度上能够反映全尺寸发动机的特性。     

某膨胀循环发动机推力室冷却结构流场仿真分析

为了研究某膨胀循环氢氧发动机推力室冷却结构流场分布特性,进行了单根冷却通道和完整冷却通道结构的三维CFD分析。仿真计算过程中,以单根通道模型的仿真结果作为完整通道结构模型流场仿真分析的边界条件之一,并考虑了材料物性参数随温度或压力的变化。分析结果表明:1)仿真预测的温升、压降与热试验实测值吻合,该推力室冷却通道流量相对偏差范围为-4.8%~6.6%,由此造成喉部气壁温的环向偏差为33 K;2)集合器管内流体的环向流动压差、法兰起分流或汇聚作用时拐弯效应形成的压力波动是造成冷却通道流量不均匀分布的主要原因,出口集合器内的压力分布对通道流量分布起主要作用;3)提高通道流量均匀性的措施可以从增大出口集合器管径或采用变管径设计、采用扩口型法兰并设置弧形导流片、集合器的进、出口法兰布置在同一环向位置等方面进行考虑。