航空发动机气动热力参数的趋势分析

航空发动机状态的趋势分析,是一种广泛地应用于航空发动机性能监控的分析技术。本文建立了发动机气动热力参数趋势分析的数学模型,着重讨论了有关数据处理中的四个问题:参数的换算;野点的判断和剔除;趋势性的判断和数据的平滑与预测。并将上述模型应用于JT9D发动机的气动热力参数的趋势分析。     

超音尾喷流红外抑制方案的研究

超音速发动机尾喷流的红外抑制是超音速飞行器隐身性能的重要组成部分。本文提出两种超音速尾喷流的红外抑制方案二次旋流方案与组合波瓣方案 ,并对两种方案共 7组试验件在不同的结构和二次流速度情况下进行了大量重复试验。在旋流方案试验中 ,对二次流加旋诱发大尺度流向涡进行了系统的研究 ,得到旋流角度、二次流速度等对掺混效果的影响规律 ,试验结果表明 :对于本结构方案 ,当二次流速度为 49m/s,旋流角在 3 0°左右 ,掺混效果最好 ,且随二次流流速的增加而加强。在组合波瓣方案的试验中 ,对组合波瓣用于超音尾喷流红外抑制进行了研究 ,试验结果表明可对超音尾喷流的红外起到有效的抑制作用。     

流动控制技术在航空涡轮推进系统上的应用

介绍了主动流动控制在风扇／压气机、主燃烧室、涡轮和排气系统中的应用情况。阐明了流动控制在大幅度地提高发动机的性能、增加发动机的稳定性、减轻发动机的重量等方面的巨大潜力。同时指出分步实施流动控制的过程也就是应对其重大技术挑战的过程。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

喷气吹气襟翼对翼型气动性能影响研究

用雷诺平均N-S方程模拟方法对翼型上下表面局部增加喷流和吹气的增升效果进行计算分析,内容包括改变喷流压比,喷流角度,舵面状态和吹气位置,以此研究吹气襟翼和喷气襟翼对翼型气动性能的影响规律.模拟结果表明:喷气增升主要通过上下翼面压力分布实现的.在一定范围内升力随喷流的压力比升高而升高;上翼面吹气可以推迟上翼面分离且吹气位置前移推迟分离效果更加明显.     

小功率电弧喷射发动机的数值计算

为详细了解电弧喷射发动机内部工作过程和相关工作参数对其性能的影响，参照实验用发动机的工作参数建立了模型，数值模拟了电弧喷射发动机工作通道内流场和电磁场。利用NND格式求解耦合电磁源项N－S方程，Gauss-Seidel迭代加超松驰方法求解椭圆型电磁场方程，计算得到的发动机工作通道内流场、电磁场结构，与实验数据进行了对比。结果表明，对同一结构尺寸的发动机，随推进剂流量变化，发动机性能存在最佳值；在一定流量范围内，实验数据和计算结果相符。     

粘流与无粘流的相互作用计算

本文总结了粘流/无粘流的各种计算方法和结果。重点在于介绍定常流动中的弱相互作用。首先叙述了弱相互作用的数学模型。给出了不可压流动和跨音速流动中粘流/无粘流相互作用的某些正耦合的计算结果。讨论了在分离区附近边界层正方法失效的原因。然后介绍了边界层反方法和适用于带分离的流动中半反方法耦合的粘流/无粘流的相互作用方法。文中也简单地总结了三维情况的应用和强相互作用。     

相邻激励器合成射流流场数值模拟及机理研究

建立了将合成射流激励器腔体、出口喉道、外部流场作为单连域计算处理的吹／吸型边界模型。在此基础上,对不同相位差、不同振幅、不同频率的相邻激励器相互作用形成的合成射流流场进行了数值分析。计算结果表明：相邻激励器工作时的相位差、振幅不同、驱动频率不同对其形成的合成射流流场有很大影响,合成射流不再对称分布,流动将发生偏转。其机理是由于两激励器吸入和排出流体流动不同(不同相、不同幅值、不同频率),使得两列旋涡对不对称,因此在两列旋涡对之间存在涡量强度不同和压强梯度,从而引起旋涡对向低压侧和强涡量区偏转。     

基于N-S方程的悬停旋翼桨叶气动干扰数值模拟

采用基于N-S方程的CFD方法,通过计算前后平行放置的双翼和三翼的干扰流场,对悬停状态旋翼桨叶之间的气动干扰机理进行了数值探讨;在此基础上,进行了2种桨叶片数、2种桨距及2种桨尖马赫数情况的旋翼悬停流场对比计算,模拟它们对旋翼气动性能和桨叶间气动干扰作用的影响,得到一些与工程实际吻合的现象和结论。     

尖前缘翼干扰区的壁面压力和热流率分布

本文给出Ｍ＿∞＝７．８和６．７２，Ｒｅ＝３．５×１０￣７／ｍ和５．４×１０￣７／ｍ气流绕迎角为２０°、３０°和３５°尖前缘翼运动时，平板锥型干扰区的壁面压力和热流率分布。结果表明：（１）平板锥型干扰区的特征几何尺度与无粘激波角β＿０和翼迎角α相关，而壁面压力和热流率的峰值与法向马赫数Ｍ＿ｎ相关。（２）翼面压力和热流率分布由于受拐角涡影响，前者在翼根部呈波谷状，而后者呈波峰状，影响尺度与翼前缘处来流边界层厚度有关。