固体火箭发动机喷管喉部凝相颗粒粒度分布实验

设计了一种新的收集固体火箭发动机喷管凝相颗粒的实验装置,针对典型的HTPB复合推进剂,开展了喷管喉部凝相颗粒的收集实验和粒度分析,研究了燃烧室压强和收敛角度对喷管喉部颗粒粒度分布的影响规律。研究结果表明,喷管喉部的凝相颗粒在0.27～50μm之间都有颗粒存在,凝相颗粒主要集中在0.3～15μm之间,粒径大于15μm的颗粒较少;燃烧室压强对颗粒粒径有较大影响,随着燃烧室压强的升高,凝相颗粒粒径变小,粒度分布更为集中;燃烧室压强相同的条件下,收敛角度对喷管喉部的凝相颗粒粒度分布影响较小。     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

恒压式气体流量计变容室截面面积测量技术研究

为了研制恒压式气体微流量计,设计了以波纹管为主体的变容室,并对波纹管变容室截面面积进行了测量。采用多项式拟合公式对波纹管截面面积测量结果进行了修正,避免了波纹管非线性的影响,结果表明修正后偏差小于0.16%,截面面积的测量结果合成标准不确定度小于0.53%,可以满足使用要求。     

无人机飞行安全控制与安控器设计

针对无人机飞行安全问题,介绍了提高任务飞行安全的技术、方法和措施,提出了基于GPS卫星接收机,独立于飞控系统的无人机安控器设计思路。在研究安控策略的基础上,设计了无人机安控器,并结合某型无人机进行了安控仿真试验,结果表明安控器有效、方案可行。     

复杂终端区进场交通流优化排序方法研究

为提高终端区时空资源利用率,增强空中交通 运行效率,研究了复杂终端区进场交通流优化排序问题。通过深入剖析终端区进场定位点、 航路航线、多跑道系统等资源运行特性,综合考虑尾流间隔、移交间隔、多跑道运行间隔等 各类约束限制,以及最小化航班延误时间、最大化跑道运行容量、最小化终端区飞行时间等 优化目标,建立了复杂终端区进场交通流优化排序模型,并采用带精英策略的非支配排序遗 传算法对所建模型进行求解。选取上海多机场组成的复杂终端区进行实例验证,仿真实验表 明提出的优化方法相比先到先服务方法(First come first serve,FCFS),航班总延误时间 减少20.7%,终端区等待时间减少60.7%,终端区进场交通流运行效率得到显著提升。     

亚声速二喉道流场不对称现象研究

为满足未来我国先进飞行器的发展需求,我国将考虑建设大型跨声速风洞,提高风洞试验模拟精细化水平。而第二喉道作为风洞 Ma 数控制的有效手段,被认为是提升跨声速风洞能力的关键技术之一。本文首先通过CFD 数值模拟发现了二喉道段流场在某些压比下存在不对称现象,然后,利用现有引导风洞,设计加工了 Ma=0.7的带可变中心体的二喉道段进行验证试验。试验结果显示,当前室总压达到某一值时,二喉道段流场会出现不对称现象,并前传影响试验段流场品质。最后利用 CFD 手段给出了一种无不对称现象的新型二喉道设计。     

Integration of high-fidelity model of forward variable area bypass injector into zero-dimensional variable cycle engine model

Forward Variable Area Bypass Injector (FVABI) is one of key components which contributes to modulate the cycle parameters of Variable Cycle Engine (VCE) under various operation conditions. The modeling method of zero-dimensional FVABI was reviewed and its deficiency was analyzed based on FVABI flow characteristic. In order to improve the accuracy of VCE performance simulation, the high-fidelity modeling method of FVABI was developed based on its working characteristics. Then it was coupled with the zero-dimensional VCE model and the multi-level VCE model was built. The results indicate that the geometric and aerodynamic parameters can affect the interaction between the two airflows and the zero-dimensional FVABI model is too simple to predict the component performance accurately, especially when the FVABI inner bypass is chocked. Based on the performance curves for single bypass mode and the regression model of multi-scale support vector regression for double bypass mode, the high-fidelity model can predict FVABI performance accurately and rapidly. The integration of high-fidelity FVABI model into zero-dimensional VCE model can be done by adjusting iterative variables and balance equations. The multi-level model has good convergence and it can predict VCE performance when the FVABI inner bypass is chocked.     

面积比、波瓣张角对多级波瓣喷管性能的影响研究

在11 km高空环境下,对喷管出口马赫数为0.75的2级波瓣喷管内外流场进行数值模拟。通过改变第1级波瓣喷管的引射面积比及第2级波瓣的下张角,分析了2级波瓣喷管的性能变化。结果表明,第1级波瓣的引射效率在第1级引射面积比为1.50时达到峰值;在总引射面积比为3.50时,上张角为15°、下张角为0°的2级波瓣喷管性能较好,其引射系数比单级波瓣喷管的高30%,推力大4%。     

跑道侵入概念中的地面保护区研究

为了便于信息交换、数据对比以及不安全事件的研究、分析和防范,亟待明确跑道侵入的外延与内涵。目前国际民航组织关于“跑道侵入”概念中存在一个“地面保护区”的术语,业内人士对其理解不尽相同。在综合考虑升降带、端安全区、仪表着陆系统场地保护区、无障碍区域、障碍物评价面等限制条件的基础上,对地面保护区的划设提出了明确的意见。结论支持并丰富了国际民航组织有关跑道侵入的定义。     

空间机器人捕获漂浮目标的抓取控制

提出了动态抓取域用于空间机器人捕获漂浮目标的抓取控制。空间机器人捕获漂浮目标时,由于机械臂与基体的动力学耦合、抓取时的碰撞激振等非线性特性使得抓取控制变得复杂而重要。首先建立了空间机器人及漂浮目标的动力学模型,而后引入了末端装置抓取目标时的碰撞模型,并提出了"动态抓取域"用于机械臂抓取目标时的控制,同时应用关节主动阻尼控制,以减小抓取碰撞激振对空间机器人冲击的影响。结果表明:在相同抓取时间下,加速抓取明显优于匀速抓取,碰撞力振幅减小至匀速抓取时的20%,对空间机器人的激振冲击明显消除,仅在抓取结束前有小幅激振。这对空间机器人的抓取控制有着重要的理论价值及工程实际意义。