门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上，对门自回归模型中门限值、滞后步长、各门限区间模型阶数，利用正交设计方法寻优，计算工作量锐减，却可得到精度较高的预报模型。     

企业本质、企业绩效与会计分析的逻辑关系

企业本质被界定为不完备要素使用权资本化交易合约履行的过程，从价值角度可以描述为财务资本、人力资本、组织资本与社会资本的一个不完全契约组合。正确认识企业本质是探讨企业绩效决定因素的关键，会计分析必须从企业资本有机构成角度来衡量企业绩效。     

基于Pro/E软件的卫星三维建模方法的探讨

主要对基于Pro/E软件的卫星三维建模和高效率、高可靠性、低成本的总装设计方法等进行了初步的研究和探讨。     

域外刑事评议程序之比较研究

刑事评议程序是介于庭审程序和宣告程序之间的一个重要程序,它既是庭审的自然延续,又是裁判结论形成的前提和基础。然而,欲保证刑事评议程序的正常运行,刑事评议主体之独立必须得到保证;刑事评议之客体还应被全面考虑,并对其进行细化,以确保刑事评议的针对性和有效性,防止出现"估堆"现象。本文以域外刑事评议程序为对象,从评议的主体、客体等角度进行梳理,得出规律性的认识,以期对我国关于刑事评议的立法有所裨益。     

国际贸易中标准问题解决方略的研究

国际贸易中的标准问题是产生贸易壁垒的一个很重要的方面,世贸组织虽然为解决这一问题做出了一些规定,采取了一些措施,但是实际效果并不好,很多的成员国并没遵守有关的规则,兑现各自的承诺。而且随着世界经济区域集团化,各种区域性标准在对内起到保护作用的同时,对外则建起新的贸易保护障碍。解决国际贸易中的标准问题,应该从两方面着手,一是加强双边合作,二是加强多方位合作。双边合作是解决标准问题直接而有效的途径,随着贸易的全球化发展,标准统一化是最终的趋势。     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

空投鱼雷蛇形搜索攻击有利提前角模型研究

提出了一种用等效扇面方法对蛇形搜索航行鱼雷攻击有利提前角的解算方法,并通过仿真对模型进行了修正。仿真结果表明,经修正后的鱼雷可达到最大命中概率。     

利用微气囊扰动进行流动控制的数值模拟研究

探讨一种可以用来模拟“三角翼上分布微气囊，从而控制流动获得滚转力矩”的数值方法。为微型飞机的气动设计提供一种工具。研究的内容包括：考虑微气囊的三角翼网格生成、流场NS方程计算、微气囊不同布局对流动的扰动等。     

Digital Aircraft Sheet Metal Part Manufacturing System and Its Key Technology

The architecture of digital sheet metal manufacturing system is proposed based on the classification of sheet metal manufacturing information.The essence of digital manufacturing is the definition,management and transfer of information,and the key technologies are brought forward and described.It is pointed out that knowledge-based manufacturing elements design is necessary to make digital technology efficient.The management of all kinds of sheet metal manufacturing element information is to build single source of manufacturing data.Multi-state model-based digital transfer and coordination method is designed to provide a foundation for digital manufacturing of aircraft sheet metal part.The application of digital sheet metal manufacturing is exemplified with an aircraft sheet metal part.The application result is compared to that of the traditional analog transfer technology.It is shown that the developed technology can improve part quality,shorten manufacturing time and lower manufacturing cost.     

基于特征模型的全系数自适应控制系统稳定性研究

讨论了基于特征模型的黄金分割加逻辑微分自适应控制律组成闭环系统的稳定性问题。针对参数未知、线性定常或慢时变的二阶不稳定对象,本文给出了在采样周期满足一定条件下,上述闭环系统渐近稳定的充分条件,其中包含对于时变参数变化范围和非线性阻尼系数的约束条件。