低波段天基雷达射频干扰机理及抑制方法

天基合成孔径雷达(SAR)是一种重要的主动遥感设备,在测绘、目标警戒、资源探测等方面具有独特的全天时、全天候优势。但由于低波段电磁频谱异常拥挤复杂,也容易受到其他无线电设备的非蓄意射频干扰(RFI)。本文针对工作于P、L波段的天基SAR系统,分析其常见的地面射频干扰源及其干扰机理,并构建典型的窄带与宽带干扰模型,比较分析了频域陷波、最小均方(LMS)算法、自适应线谱增强(ALE)、特征子空间分解与时频滤波等多种干扰抑制算法,并在卫星实测数据的基础上进行仿真验证抑制宽带干扰的有效性。仿真结果表明:时频滤波算法抑制宽带干扰效果最好,造成的信号损失最小,能够为后续天基合成孔径雷达的抗干扰算法设计提供决策依据。     

Remote upgrading of a space-borne instrument

The main purposes of experiment “Obstanovka” (“Environment” in Russian) consisting of several instruments are to measure a set of electromagnetic and plasma phenomena characterizing the space weather conditions, and to evaluate how such a big and highly energy consuming body as the International Space Station disturbs the surrounding plasma, and how the station itself is charged due to the operation of so many instruments, solar batteries, life supporting devices, etc. Two identical Langmuir electrostatic probes are included in the experiment “Obstanovka”. In this paper the Langmuir probes for “Obstanovka” experiment are described, including the choice of geometry (spherical or cylindrical), a more reliable method for the sweep voltage generation, an adaptive algorithm for the probe’s operation. Special attention is paid to the possibility for remote upgrading of the instrument from the ground using the standard communication channels.     

基于软件工程思想方法的CAI课件开发

介绍了软件工程思想方法，运用软件工程思想方法基于瀑布模型分析了CAI课件开发过程，实践创作开发了基于Web的多媒体《概率论与数理统计》CAI课件。     

亚跨超CFD软件平台研制

亚跨ＣＦＤ软件平台研制的宗旨是综合国内外计算流体动力学的最新研究成果，用计算机软件技术的新发展，建立一个面向对象的计算流体动力学的研究开发环境，加快计算流体动力学最新成果向工程应用的转换速度。本文介绍初级版本的研究进展和研究成果，主要匝数值网格生成技术，流场解算器，面向对象的界面设计等三部分组成。     

基于1553B和SpaceWire组合网络的星载数据管理软件设计

为同时满足对于星务管理数据和高速载荷数据的传输要求,国内外的飞行器趋于使用1553B和SpaceWire组合网络来进行星上数据传输。复杂而灵活的数据传输要求使得卫星数据流设计中引入了大量标准协议,同时大大增加了星载数据管理软件的复杂度。对一种基于1553B和SpaceWire组合网络的星载数据管理软件的协议体系进行了介绍,通过对协议进行分析,改进了已有的软件框架,形成了一种基于标准协议的分层的软件架构,以空间包为单位实现星内数据交互,实现了软件应用层与数据链路协议的分离。软件实现结果表明,合理的协议分层和有效的接口封装提高了软件的可拓展性和可移植性,有利于软件产品化。     

软件技术专业“订单式”人才培养模式的探索和实践

本文从“订单式”人才培养模式的客观需求入手，依据课题的研究和实践经验，综述了软件技术专业“订单式”人才培养的开展过程，分析了“订单式”人才培养模式的关键问题并提出了解决方案。     

Solar Sources of Heliospheric Energetic Electron Events—Shocks or Flares?

Electrons with near-relativistic (E≳30 keV, NrR) and relativistic (E≳0.3 MeV) energies are often observed as discrete events in the inner heliosphere following solar transient activity. Several acceleration mechanisms have been proposed for the production of those electrons. One candidate is acceleration at MHD shocks driven by coronal mass ejections (CMEs) with speeds ≳1000 km s⁻¹. Many NrR electron events are temporally associated only with flares while others are associated with flares as well as with CMEs or with radio type II shock waves. Since CME onsets and associated flares are roughly simultaneous, distinguishing the sources of electron events is a serious challenge. On a phenomenological basis two classes of solar electron events were known several decades ago, but recent observations have presented a more complex picture. We review early and recent observational results to deduce different electron event classes and their viable acceleration mechanisms, defined broadly as shocks versus flares. The NrR and relativistic electrons are treated separately. Topics covered are: solar electron injection delays from flare impulsive phases; comparisons of electron intensities and spectra with flares, CMEs and accompanying solar energetic proton (SEP) events; multiple spacecraft observations; two-phase electron events; coronal flares; shock-associated (SA) events; electron spectral invariance; and solar electron intensity size distributions. This evidence suggests that CME-driven shocks are statistically the dominant acceleration mechanism of relativistic events, but most NrR electron events result from flares. Determining the solar origin of a given NrR or relativistic electron event remains a difficult proposition, and suggestions for future work are given.     

一种同轴腔温漂问题的仿真

文章在三维仿真软件HFSS和CST中建立谐振腔模型，给出建模的原理和注意点；详细研究了腔体各尺寸随温度变化对腔体本征频率的影响的正负性及影响大小，得出引起腔体频率变化的主要结构因素；重点分析了调谐螺钉纵向扰动及径向扰动对谐振频率的影响。结合LC谐振电路对结果进行分析，得出减小温漂的措施。并根据仿真结果，对腔体的各个部分合理使用不同材料，使腔体温漂得到补偿。     

军用嵌入式可信软件研究

随着军用计算机技术的不断发展,软件在军用设备中的地位越来越重要。软件规模日益增大,安全性、可靠性等问题日益凸显。充分研究可信软件的特性,对提高我国军用装备技术水平意义重大。在总结学术界对可信软件定义的基础上,结合实际的军事嵌入式应用阐述了软件可信性特点。分析了国内外军用领域软件可信性的发展现状,总结了软件可信性的评估方法。     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。