含间隙运动控制系统中的定位抖动和 速率波动原因分析及解决措施

针对一类含间隙大惯量非直驱转动系统中出现的速率波动现象,利用描述函数法和计算仿真的方法进行了原因分析.在通常的解决措施如双电机消隙、机械消隙方法之外,针对一类间隙可测量的运动控制系统,提出了解决该类问题的新思路,即通过间隙的间接测量,利用反馈机制进行间隙补偿,并用小增益定理证明了其稳定性.实现了部分电气消隙的作用,在适当降低跟踪精度的情况下,消除了定位抖动,提高了速率平稳性.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

蜻蜓起飞过程飞行特征实验

针对蜻蜓自由起飞过程和准自由起飞过程进行实验观测,采用两个光轴相互垂直的高速摄像机进行拍摄,通过特征点匹配和三维重构方法准确地捕捉了两种起飞过程中蜻蜓身体和翅膀的运动参数,并进行运动特征分析与对比。实验结果表明:蜻蜓在自由起飞过程中采用同步振翅,离地后逐步转换成异步振翅(约110°),最大瞬时竖直加速度可以达到20m/s2;在准自由起飞过程中采用异步振翅(相位差180°),之后相位差逐步降低,最大瞬时竖直加速度为12m/s2;此外发现同步振翅、大攻角下拍及大拍动角有利于升力的产生。      

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。     

力值加载装置控制系统设计

针对力标准机不适用于力值现场校准测试的问题,设计了一种便携式的力值加载装置。该装置采用STM32F103为主控单片机,采用高准确度AD转换器测量力值,优化了力值加载控制算法,避免了力值加载过程中可能出现的各种问题。该装置控制速度快,准确度高,适用于力值现场校准测试。     

气浮运动组件内外球面的角摆静压力自动补偿研磨方法

根据磁悬浮零部件专用测量机气浮运动组件内外球面的高精度技术要求,设计一种角摆静压力自动补偿万向球头节研磨机构,在普通车床上采用内外球面自动研磨的方法代替传统手工对研.实践证明提高了气浮运动组件的研磨质量和效率,有一定参考价值.     

球形粒子在流体中的跟随性

本文从Maxey和Riley的粒子运动基本方程出发,得到了球形固体粒子在相对流动雷诺数很小情形下的分析解。讨论了粒子跟随性对外力、初始条件和流场性质的依赖关系;对均匀湍流场,分析了不同密度比和扰动频率对跟随性的影响     

Vertical motions in Thailand after the 2004 Sumatra–Andaman Earthquake from GPS observations and its geophysical modelling

Following previous findings from ongoing GPS research in Thailand since 2004 we continue to exploit the GPS technique to monitor and model land motions induced by the Sumatra–Andaman Earthquake. Our latest results show that up to the end of 2010, Thailand has been co-seismically displaced and is subsequently undergoing a post-seismic horizontal deformation with total displacements (co-seismic plus post-seismic) ranging from 10.5 to 74.7 cm. We observed the largest horizontal displacements in the southern part of Thailand and moderate and small displacements in the central and northern parts. In addition to horizontal displacements throughout Thailand, continuous GPS measurements show that large parts of Thailand are subsiding at rates up to 1 cm/yr. It is the first time that such vertical post-seismic deformations at large distances (650–1500 km away from the Earthquake’s epicentre) have been recorded. We have investigated the physical processes leading to the observed subsidence. While after-slip on the subduction interface induces negligible or even slightly positive vertical motions, relaxation in the asthenosphere is associated with a sizable subsidence. Predictions from a 3D finite element model feature an asthenosphere with an effective viscosity of the order of 3 * 10¹⁸ Pas, fit the horizontal post-seismic data and the observed subsidence well. This model is then used to predict the subsidence over the whole seismic cycle. The subsidence should go on with a diminishing rate through the next two decades and its final magnitude should not exceed 10 cm in the Bangkok area.