一种动态电源供电系统的设计实现方法

为将动态电压调整技术应用于设计中进行功耗优化,阐述了动态电源调整技术、电压识别技术、PMBus总线等基础知识,提出了一种动态电源供电系统的设计方案。采用UCD9222控制器和UCD7242驱动器的设计实例,介绍了动态电源供电系统的配置管理和实现方法,实现了对处理器内核供电电压的动态供电,具有通用性和易用性等优点,可以有效降低系统功耗,满足动态电源供电的设计需求。     

Direct position determination using single moving rotating linear array: Noncoherent and coherent processing

To improve the resolution and accuracy of Direct Position Determination (DPD), this paper investigates the problem of positioning multiple emitters directly with a single moving Rotating Linear Array (RLA). Firstly, the geometry of the RLA is formulated and analysed. According to its geometry, the intercepted noncoherent signals in multiple interception intervals are modeled. Correspondingly, the MUltiple SIgnal Classification (MUSIC) based noncoherent DPD approach is proposed. Secondly, the synchronous coherent pulse signals are individually considered and formulated. And the coherent DPD approach which aims for localizing this special type of signal is presented by stacking all array responses at different interception intervals. Besides, we also derive the constrained Cramér-Rao Lower Bound (CRLB) expression for both noncoherent and coherent DPD with RLA under the constraint that the altitudes of the emitters are known. At last, computer simulations are included to examine the performance of the proposed approach. The results demonstrate that the localization accuracy and resolution of DPD with single moving linear array can be significantly improved by the array rotation. In addition, coherent DPD with RLA further improves the resolution and increases the maximum emitter number that can be localized compared with the noncoherent DPD with RLA.     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

基于马鞍形磁场的永磁直线电机位置解算方法

针对直线电机转子位置检测低成本和较高精度的要求,提出了一种基于马鞍形磁场来获得位置信息的方法及实现过程。分析了永磁体表面的磁场分布特征,指出了利用马鞍形磁场分布曲线来解算位置信息的优点,提出了根据马鞍形磁场推算位置信息的算法流程:先测得错开相位的2条马鞍形曲线数据,划分为4个象限后建立数据库；位置检测时,运用区间搜索算法寻得实际角度所在区间；再根据精度要求,采用合适的插值算法计算得到待解算的角度。仿真结果表明:基于马鞍形磁场的位置解算,能较好地得到直线电机转子的位置信息。     

无人飞行器集群仅测距初始相对位姿确定方法研究CSCD

针对全球导航卫星系统(GNSS)拒止环境下无人飞行器集群成员间的相对定位问题,研究了一种基于机载惯性测量单元(IMU)、气压高度计与数据链测距组合的初始相对位姿求解算法。首先,在高度计稳定输出较为精确的高度信息的前提下,将飞行器的三维运动解耦成二维水平运动,给出了三维加速度和角速度、测距信息的水平坐标系投影等效模型。在此基础上,以待求量相对位置和航向角的非线性形式构造了新的待求状态量,并将相对位置和航向角的非线性求解问题转化成了新状态量的线性模型最小二乘求解问题。然后,通过引入递推最小二乘算法(RLS),建立了该相对位姿求解算法的实时输出递推形式,有效降低了机载在线计算的负载。接着,对所提算法进行了可观测性分析,并给出了使系统状态量不可观测的几种相对运动形式。最后,对所提算法进行了数值仿真实验,仿真结果表明,该算法能够有效、快速求解初始相对位姿,位置误差在初始相对距离的10%以内,航向角误差在初始相对角度的1%以内。     

基于本征正交分解的叶片碰摩系统降阶方法

针对叶片碰摩响应求解问题,提出了采用本征正交分解进行动力学降阶的方法。通过对快照矩阵进行本征正交分解生成投影子空间,将系统动力学方程投影到子空间进行模型降阶,并结合数值积分方法进行了碰摩响应求解。基于降阶模型分析了不同转速及侵入量参数下的叶片碰摩响应,并与全阶模型进行了对比。结果表明:降阶模型的时域响应幅值偏差小于5%,计算效率了提升98.4%;通过改变叶片转速、侵入量参数验证了降阶模型的鲁棒性,并且发现随着转速、侵入量的增加,本征正交模态能量在低阶与高阶之间发生转移,并呈现出不同的传递规律,由转速引起的模态能量转移与结构的固有频率存在一定关系。该方法及结论可为叶片碰摩分析及故障诊断提供依据。      

大迎角非定常气动力建模与模型比较

应用系统识理论,以６００ 三角翼纵向俯仰运动为例,在频率域内建立了基于Ｆｏｕｒｉｅｒ变换法的非定常气动力数学模型及非线性代数模型,在时间域内建立了基于Ｆｏｕｒｉｅｒ反变换法及数据库法的阶跃函数模型。用大振幅非定常实验数据进行模型参数辨识。本文主要对Ｆｏｕｒｉｅｒ变换模型初值的选取进行讨论,并对所建立的几种数学模型进行比较。结果表明,基于Ｆｏｕｒｉｅｒ变换法的数学模型,有明确的表达式,拟合结果较好;非线性代数模型表达式简单,便于应用,但对于不同实验模型,表达式不同;基于Ｆｏｕｒｉｅｒ 反变换法的阶跃函数模型,表达式复杂,而且当时间趋于零时,计算误差较大;基于数据库法的阶跃函数模型没有明确表达式,但其精度较高,可以用于对其他模型结果的比较。     

弹性梁碰撞阻尼识别的新方法

首先将连续碰撞系统离散成包括任意个模态的状态方程,然后基于Hertz定理和能量平衡原理,证明弹性碰撞阻尼取决于碰撞冲量和最大碰撞力,提出了确定弹性梁碰撞阻尼的新方法,解决了碰撞阻尼识别中的关键问题。最后由两个弹性梁的碰撞实验检验了其正确和有效性。