生物膜法和活性污泥法去除NH3-N的比较研究

在气升式内循环生物反应器的内循环管中,安装蜂窝状陶瓷载体构成一种新型的生物膜反应器,利用该反应器对模拟生活污水进行NH3-N去除的研究。并与相应的活性污泥法进行比较。实验结果表明：生长于蜂窝陶瓷的生物膜,其对废水的硝化性能显著地提高。在脱氮效果和速率上,生物膜法比普通的活性污泥法具有明显的优势。在此基础上探讨了内循环对生物脱氮的机理。     

分层去除微细电火花铣削加工的NC程序生成

利用简单电极,基于分层制造原理的微细电火花铣削加工技术是实现微三维结构加工的有效手段之一。本文研究了用该方法进行三维曲面加工时的NC程序生成方法,并给出了加工实例。     

铸铝薄壁件高速钻深孔技术研究

为解决铸铝薄壁件进气机匣的深孔加工，针对麻花钻加工深孔的难点，在加工中心上研究了用枪钻和GT深孔麻花钻高速加工深孔的方案和工艺参数，并探讨了雾化高压气体强制排屑加工深孔的技术，获得了典型薄壁箱体零件的高速钻深孔的经验。     

Practical guidelines for electro-dynamic tethers to survive from orbital debris impacts

Japan Aerospace Exploration Agency (JAXA) has proposed an active debris removal using electro-dynamic tether to reduce large space debris in the low-Earth orbit. However, a tether strand is thin but long enough to have a large area so that it is vulnerable to small particles. This vulnerability might be the weakest point of a tether system against orbital debris. In order to overcome this weakest point, a double tether system, in which two tether strands are tied together at even intervals to form equally spaced loops, has been suggested as one of the promising candidates. This paper provides a mathematical approach to estimate the survival probability of a double tether system and then apply the approach to evaluate the mission success rate of the active debris removal using electro-dynamic tether that JAXA has proposed. It can be concluded the countermeasure to get enough success rate can be obtained. The result is simulated for Advanced Earth Observing Satellite II (ADEOS-II) re-entry from 800 km sun synchronized orbit to atmosphere. The simulation shows that mission success rate over 90% can be obtained with number of loops over 1000 and 10 mm clearance between two strands.     

Fuzzy multi-criteria decision-making approach to prioritization of space debris for removal

As private companies and government space agencies begin to seriously consider the task of active space debris removal, it is becoming increasingly more important to determine the highest priority objects to deorbit. This work sets forth an approach for prioritization of space debris through the utilization of Multi-Criteria Decision-Making methodologies and fuzzy logic, as well as both quantitative and qualitative criteria. The proposed debris prioritization approach considers various criteria including the orbit, size, mass, pairwise and total collision probabilities, and decay timeframe of each debris object. The means of assigning attributes to each assessment criterion is discussed in detail. To determine the weighting scheme for the criteria, a questionnaire was prepared and shared with experts in the field of space situational awareness. The work examines over two thousand critical debris objects selected from the existing debris catalog with respect to these criteria. The quantified attributes for each debris object are then aggregated through the fuzzy versions of the Analytic Hierarchy Process and the Technique for Order Preference by Similarity to Ideal Solution. The results of the analysis identify high-priority debris objects for removal from Earth-bound orbits.     

忆阻细胞神经网络及图像去噪和边缘提取中的应用

结合忆阻器的记忆特征和细胞神经网络高效并行处理能力,将忆阻器作为可编程连接权值,提出了一种具有忆阻器特性的细胞神经网络.计算机仿真验证了提出的忆阻细胞神经网络用于图像去噪和边缘提取的有效性.     

Approaching control for tethered space robot based on disturbance observer using super twisting law

Approaching control is a key mission for the tethered space robot to perform the task of removing space debris. But the uncertainties of the TSR such as the change of model parameter have an important effect on the approaching mission. Considering the space tether and the attitude of the gripper, the dynamic model of the TSR is derived using Lagrange method. Then a disturbance observer is designed to estimate the uncertainty based on STW control method. Using the disturbance observer, a controller is designed, and the performance is compared with the dynamic inverse controller which turns out that the proposed controller performs better. Numerical simulation validates the feasibility of the proposed controller on the position and attitude tracking of the TSR.     

A deorbiter CubeSat for active orbital debris removal

This paper introduces a mission concept for active removal of orbital debris based on the utilization of the CubeSat form factor. The CubeSat is deployed from a carrier spacecraft, known as a mothership, and is equipped with orbital and attitude control actuators to attach to the target debris, stabilize its attitude, and subsequently move the debris to a lower orbit where atmospheric drag is high enough for the bodies to burn up. The mass and orbit altitude of debris objects that are within the realms of the CubeSat’s propulsion capabilities are identified. The attitude control schemes for the detumbling and deorbiting phases of the mission are specified. The objective of the deorbiting maneuver is to decrease the semi-major axis of the debris orbit, at the fastest rate, from its initial value to a final value of about 6471?km (i.e., 100?km above Earth considering a circular orbit) via a continuous low-thrust orbital transfer. Two case studies are investigated to verify the performance of the deorbiter CubeSat during the detumbling and deorbiting phases of the mission. The baseline target debris used in the study are the decommissioned KOMPSAT-1 satellite and the Pegasus rocket body. The results show that the deorbiting times for the target debris are reduced significantly, from several decades to one or two years.     

激光驱动接力移除空间碎片的小卫星星座及可行性研究

在众多空间碎片移除技术中，天基激光烧蚀驱动是一种高效的、有广阔应用前景的移除技术，特别是针对移除海量的、尺寸在1~10 cm的危险碎片而言，更是具有独特优势。然而，这一技术对高能激光器单脉冲能量、光束质量、发射镜口径等要求很高，目前的硬件水平还达不到实用指标要求，制约了其天基应用。为了克服这些硬件技术障碍，本文另辟蹊径，利用小卫星概念，提出了由不同轨道高度小卫星平台组成小卫星星座，通过在每个小卫星平台上的激光驱动接力来逐步降低碎片轨道高度，最终达到移除空间碎片的小卫星接力移除星座的构想。基于现有的激光器性能参数，根据激光烧蚀驱动碎片动力学模型计算了单个卫星平台的移除能力，结果显示，10 J单脉冲能量激光器和0.5 m直径发射镜，能够对20 km范围内、尺寸小于10 cm碎片进行有效驱动。进而，针对空间碎片密集度高而应用最广的800 km轨道高度区域，设计了由分布在不同轨道高度的30颗小卫星组成接力驱动移除星座系统方案，通过仿真模拟计算验证了星座系统的移除碎片的可行性。该研究利用目前热门的小卫星星座，降低了天基激光移除空间碎片技术对硬件的性能要求，为该技术的应用提供了新的思路和途径，所提出的小卫星接力驱动星座系统方案也有工程参考价值。     

Feasibility analysis of LEO and GEO large space debris de/re-orbiting taking into account launch mass of spacecraft-collector and its configuration layout

Analysis of the efficiency of two basic strategies for de/re-orbiting large space debris objects to disposal orbits (DO) is given. Large objects in LEO are classified into groups with similar orbital inclinations and comprise primarily last stages of launch vehicles, in GEO vicinity the paper studies upper stages. Under the first de/re-orbiting variant, it is assumed a spacecraft-collector is equipped with several thruster de/re-orbiting kits (TDKs); one of them can be fixed on an object and is capable of de/re-orbiting an object to a DO independently of the collector. In the second variant, a collector operates as a space tug: transfers objects to a DO and then returns to the next objects in line. The authors study possible configuration layouts of collectors in LEO and near GEO. The available analogous projects are analyzed. The efficiency of both de/re-orbiting variants can be properly compared using the estimations of collector's dry mass and having at one's disposal the parameters of the maneuvers required for transfers between all objects in the group. As reasonable criteria of effectiveness, one can consider (separately or jointly) the launch mass of an equipped collector, its ΔV budget, and the required number of such active spacecraft. Two de/re-orbiting variants are compared in terms of these criteria via mass-energy diagrams constructed for each group of objects in both altitude regions. Analysis of these diagrams shows that low Earth orbits can be more efficiently cleaned under the first de-orbiting variant by using a two-stage space system consisting of an active spacecraft carrying TDKs. For GEO, it is expedient to choose the second re-orbiting variant using a single-stage spacecraft. Our analysis shows that LEO cleaning is an order of magnitude more expensive than that for GEO, hence the problem of LEO population should be given increased attention.