微流量测量方法及其技术的发展

归纳了近五年来基于MEMS技术的微流量传感器结构及性能参数。根据国际上热门的研究方法推断微流量测量技术可能的发展方向与研究趋势,即集成两种或两种以上的测量方法,实现优势互补,提高测量精度或扩大量程比。最后基于现有的技术基础,提出了融合科氏效应与差压效应的微流量测量方法,阐述了传感器的工作原理与理论基础,并对其可行性进行了分析与论证。     

超高速撞击下PTFE/Al含能材料薄板的载荷特性分析

不同于传统惰性材料的空间碎片防护结构,含能材料防护结构在超高速撞击下的冲击起爆特性是其防护能力得以提高的根本原因。PTFE/Al含能材料防护结构的冲击起爆特性改变了弹丸强冲击载荷下的破碎机制,弹丸内部的冲击压力对于分析含能材料在超高速撞击下的防护机理具有重要意义。对超高速撞击试验中回收的PTFE/Al防护结构后板进行损伤特性分析,获得了对应速度条件下弹丸的破碎特性。基于一维冲击波理论,分析PTFE/Al靶板在超高速撞击条件下的冲击响应过程,结合考虑化学反应效率的热化学反应模型,获得了弹丸在碰撞与爆炸联合作用下的载荷特性,通过与试验结果对比验证,获得该材料完全反应的临界撞击速度约为1800 m/s,弹丸的临界破碎速度为2875 m/s,小于铝防护结构中对应的临界破碎速度。给出了弹丸在PTFE/Al、铝两种防护结构中产生相同冲击压力时对应的临界速度,分别为弹道段的800 m/s和破碎段的3580 m/s。     

弹片热机械疲劳试验方法研究及设计

针对弹片的热机械疲劳（TMF）试验要求，采用机械设计技术、机电技术、冷却技术、计算机技术和数据采集技术，提出了压力载荷和热载荷的加载方法，建立了2种载荷5个试验件的并联试验控制系统，并设计了弹片热机械疲劳试验器。试验结果表明:该系统能够同时模拟服役环境下弹片的压力载荷和热载荷。利用该试验系统进行了弹片的热机械疲劳试验，试验结果再现了弹片在服役状态下的失效模式。试验系统具有良好的重复度、较高的加载频率和加载精度。压力载荷最大相对误差为2.4%，绝对误差小于0.5N。温度载荷最大相对误差为3.55%，最大绝对误差为3.89℃。      

Fast spacecraft solar radiation pressure modeling by ray tracing on graphics processing unit

A novel method is presented to evaluate on the graphics processing unit (GPU) the force and torque on a spacecraft due to solar radiation pressure. The method employs efficient ray tracing techniques, developed in the graphics rendering discipline, to resolve spacecraft self-shadowing and reflections at faster than real-time computation speed. The primary algorithmic components of the ray tracing process which contribute to the method’s computational efficiency are described. These components include two-level bounding volume hierarchy acceleration data structures, fast ray to bounding box intersection testing using the slab intersection algorithm and fast triangle intersection testing using the Möller-Trumbore algorithm. Spacecraft material optical properties are represented as a combination of Lambertian diffuse and ideal specular reflections. Both diffuse and specular ray-surface interactions are modeled. The approach is implemented using C++ and OpenCL and executed on a consumer grade GPU. Model validation is presented comparing ray traced force and torque values to the same quantities produce by a faceted analytic model. Numerical results illustrate the impact of self-shadowing on the force and torque calculation, and demonstrate the fast computational speed that is enabled with this implementation.     

开孔变刚度层合板压缩屈曲性能研究

针对开孔变刚度层合板,建立3种尺寸的层合板有限元模型,采用了线性屈曲、引入残余热应力的线性屈曲和引入初始缺陷的非线性屈曲的3种分析方法,研究了开孔层合板在压缩条件下的屈曲行为,并通过自动铺丝制造层合板进行试验对比,对3种方法的合理性进行了分析。结果表明,引入残余热应力的线性屈曲分析方法与试验结果最吻合,两者仅相差0.63%。基于该方法,讨论开孔层合板残余热应力分布特点和应力水平,得出了开孔层合板的应力分布云图和应力分布规律,计算出残余热应力对开孔复合材料层合的屈曲影响。结果表明,残余热应力对传统直线开孔层合板的屈曲载荷影响很小,仅提高了3.57%,但大大提高了变刚度开孔层合板的屈曲载荷,最多可达23.40%。说明纤维曲线铺放可以改变内部残余热应力的分布,提高整个开孔层合板承载压缩载荷的能力。     

回流燃烧室流动特性试验

为了揭示有/无燃烧状态下燃烧室热态和冷态流场的特征和流动特性，针对某型回流燃烧室单头部试验件，使用粒子图像测速仪（PIV），测量燃烧室燃烧状态下不同截面处的热态流场，以及没有燃烧状态下不同截面处的冷态流场，探讨不同总压损失系数对回流燃烧室热态/冷态流场特征及流动特性的影响。研究表明:随着总压损失系数的增大，冷态条件下各截面流场结构基本保持不变，如射流孔穿透深度、射流角度、回流区位置及大小、流线等基本保持一致，但是各位置点速度大小逐渐增大。热态条件下各截面流场随着总压损失系数增大，流场结构也基本保持不变；相同总压损失系数时，热态流场与冷态流场存在差异，燃油喷射与气流的相对运动将会对燃烧室头部的流场结构造成影响，速度较冷态流动时略微增大。      

Numerical investigation on flow nonuniformity-induced hysteresis in scramjet isolator

Numerical simulation and theoretical analysis were conducted to study the hysteresis inside scramjet isolator during the reciprocating process of back pressure variation. It is revealed that only a regular reflection is theoretically possible for two leading shocks when the inflow Mach number is greater than 2.0, and no hysteresis can occur in the transition between shock reflection types. Nevertheless, wall suction, gas injection, and background waves cause non-uniformity of the incoming flow and would make hysteresis possible. Besides the classical hysteresis in the transition between shock reflection, new kinds of hysteresis were found in both the deflection angle of separated boundary layer and the location of the shock train. Moreover, the occurrence of hysteresis in the deflection angle of the separated boundary layer is accompanied with the shock reflection hysteresis. In the case with background waves or gas injection, hysteresis in the starting position of leading shock was observed too. As back pressure decreases, the leading shock does not follow the same path as that as the back pressure increases, and it is anchored at the location where the background shock or the injection interacts with the leading shock. It is inferred that, if two strong adverse pressure gradient regions move towards and interact with each other, hysteresis will take place when they start to separate.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

液体火箭发动机推进剂泵诱导轮与离心轮的匹配

为获得诱导轮离心轮周向匹配的时序效应对离心泵外特性以及压力脉动的影响规律，阐释相关作用机制，采用基于分离涡仿真（DES）的离心泵三维全流道数值仿真方法，引入熵产理论以及压力脉动强度系数等先进分析方法对不同匹配角度下离心泵内能量损失机制及压力脉动特性进行了研究。结果表明：离心轮诱导轮的时序效应对泵外特性有一定的影响，随着匹配角度的增加，扬程和效率均呈现先减小后缓慢增大的趋势，扬程变化为0.8%，效率变化为1.2%，其影响机制由不同匹配角度下叶轮通道分离涡、叶轮叶片尾迹以及靠近隔舌处扩压器通道回流涡变化决定；时序效应对离心轮扩压器动静干涉效应影响显著，当诱导轮叶片尾缘位于离心轮相邻主叶片中间位置时，能够有效消除3倍频成分，显著降低泵内压力脉动水平，其中动静干涉区域以及隔舌处扩压器叶片表面压力脉动平均降幅分别达到14.5%和16.7%。