Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing

In aircraft wing design, engineers aim to provide the best possible aerodynamic performance under cruise flight conditions in terms of lift-to-drag ratio. Conventional control sur-faces such as flaps, ailerons, variable wing sweep and spoilers are used to trim the aircraft for other flight conditions. The appearance of the morphing wing concept launched a new challenge in the area of overall wing and aircraft performance improvement during different flight segments by locally altering the flow over the aircraft's wings. This paper describes the development and appli-cation of a control system for an actuation mechanism integrated in a new morphing wing structure. The controlled actuation system includes four similar miniature electromechanical actuators dis-posed in two parallel actuation lines. The experimental model of the morphing wing is based on a full-scale portion of an aircraft wing, which is equipped with an aileron. The upper surface of the wing is a flexible one, being closed to the wing tip; the flexible skin is made of light composite materials. The four actuators are controlled in unison to change the flexible upper surface to improve the flow quality on the upper surface by delaying or advancing the transition point from laminar to turbulent regime. The actuators transform the torque into vertical forces. Their bases are fixed on the wing ribs and their top link arms are attached to supporting plates fixed onto the flex-ible skin with screws. The actuators push or pull the flexible skin using the necessary torque until the desired vertical displacement of each actuator is achieved. The four vertical displacements of the actuators, correlated with the new shape of the wing, are provided by a database obtained through a preliminary aerodynamic optimization for specific flight conditions. The control system is designed to control the positions of the actuators in real time in order to obtain and to maintain the desired shape of the wing for a specified flight condition. The feasibility and effectiveness of the developed control system by use of a proportional fuzzy feed-forward methodology are demon-strated experimentally through bench and wind tunnel tests of the morphing wing model.     

反临近空间高超声速飞行器若干研究进展

为了支撑我国反临近空间高超声速飞行器相关领域的基础研究和工程研制，在分析典型临近空间高超声速目标飞行特性和作战任务剖面的基础上，综述了目标预警探测、轨迹跟踪预测、制导控制方法、拦截攻击策略四个方面的若干研究成果，讨论了每个方面存在的技术难题和可行的解决方案，并建议从天/临/空/地/海体系预警、红外多模复合敏感、可攻击区轨迹预测、直/气复合等先进控制、协同拦截防御等方面给予重点研究。     

MIMO随机振动试验控制的逆多步预测模型法

多输入多输出（MIMO）随机振动试验在产品可靠性验证中扮演重要角色。逆系统方法作为一种时域方法，直接由参考信号（即期望得到的响应信号）生成驱动信号，但容易产生不稳定的结果。本文以系统的有限差分模型为基础，推导了逆多步预测模型，并建立了该逆模型与矩阵幂次算法结合的MIMO随机振动试验方法。通过悬臂梁模型进行双输入双输出仿真试验，验证了逆多步预测模型进行MIMO随机振动试验驱动生成的可行性。在三轴振动台上进一步验证该方法进行MIMO随机振动试验控制的能力。     

单向阀流路系统自激振荡特性研究

针对液流试验中出现的单向阀系统自激振荡现象,建立了描述该系统动态过程的非线性动力学模型。通过数值计算证实了系统在一定条件下出现极限环,系统是局部稳定,大范围不稳定,计算结果与试验相吻合。分析了此系统产生自激振荡的原因、影响因素及抑制措施。     

V&V在反舰导弹半实物仿真中的应用

半实物仿真在军事领域发挥着重要作用,是研究复杂系统的主要仿真手段.反舰导弹半实物仿真系统的建设目的是为了测试导弹末制导雷达在开环和闭环情况下的抗干扰性能.在对V&V技术的简要介绍的基础上,较详细地介绍了V&V技术在系统建设中的应用.     

基于支持向量经验模态分解的故障率时间序列预测

 针对故障率时间序列的非线性与非平稳特性,提出一种基于支持向量经验模态分解(SVEMD)的预测方法。首先,将故障率时间序列分解为多个固有模态函数(IMF)与一个余量(RF),利用最小二乘支持向量机(LSSVM)预测时间序列两端的局部极值点,以抑制传统经验模态分解(EMD)的边缘效应;同时以LSSVM回归方式形成包络线,以取代传统EMD中的三次样条插值;然后,建立各IMF与RF的预测模型;最终,将各IMF与RF的预测结果相加以获得故障率时间序列的预测结果。仿真结果表明,该方法的预测精度较传统基于EMD的预测方法与单一预测方法有显著提高,可实现对故障率的准确预测。     

基于神经网络的垂尾飞行载荷模型研究

针对现代飞机结构设计复杂、传力路径多和大载荷结构变形大等因素,提出用神经网络方法建立载荷模型.利用垂尾载荷校准试验数据建立基于神经网络的垂尾根部剪力和弯矩的载荷模型,并对多点进行载荷预测.通过与多元线性回归载荷预测结果进行对比分析,结果表明,在大载荷下神经网络预测精度优于多元线性回归,从而为测量垂尾飞行载荷提供了一种可...     

A SMGCS滑行道冲突预测与避免控制

针对先进机场场面引导与控制系统(Advanced surface movement guidance and control system,A-SMGCS)滑行道冲突预测与避免控制,提出基于事件反馈的闭环控制框架,并重点解决对头冲突预测与避免控制问题。建立滑行道受控着色Petri网模型。提出航空器可控滑行路段概念,并给出其对应子模型的生成规则。利用子模型中环路和环路链,给出无对头冲突的充分必要条件。提出对头冲突避免控制策略,以及适合实时控制的对头冲突预测与避免控制算法。算例表明本文能根据场面状态及时识别对头冲突并实现冲突避免。     

缺口件振动疲劳寿命分析的名义应力法

为了描述缺口根部应力均方根(RMS)的集中程度,给出了缺口件在动态载荷激励下的应力均方集中系数的定义及其计算公式.基于结构疲劳的基本机理,通过考察缺口根部应力均方根的分布特点,给出了疲劳缺口系数的计算公式,形成了缺口件振动疲劳寿命分析的名义应力法.通过3个算例的计算结果表明,本文提出的方法能很好地预测缺口件的振动疲劳寿...     

载人航天器密封舱流动和传热数值模型及其地面验证

为求解载人航天器密封舱内复杂的空气对流、导热和辐射三者耦合的传热问题,本文建立了载人航天器密封舱的流动与传热数值模型,对地面试验状态下密封舱内的空气流动与传热进行了仿真分析,并利用试验结果对数值模型进行了验证.结果表明,建立的数值模型可靠且具有较高精度,仿真结果与地面试验数据吻合性较好,可进一步用于热控系统性能评估、在轨支持和故障处理.