Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

A residual based adaptive unscented Kalman filter for fault recovery in attitude determination system of microsatellites

This paper presents an adaptive unscented Kalman filter (AUKF) to recover the satellite attitude in a fault detection and diagnosis (FDD) subsystem of microsatellites. The FDD subsystem includes a filter and an estimator with residual generators, hypothesis tests for fault detections and a reference logic table for fault isolations and fault recovery. The recovery process is based on the monitoring of mean and variance values of each attitude sensor behaviors from residual vectors. In the case of normal work, the residual vectors should be in the form of Gaussian white noise with zero mean and fixed variance. When the hypothesis tests for the residual vectors detect something unusual by comparing the mean and variance values with dynamic thresholds, the AUKF with real-time updated measurement noise covariance matrix will be used to recover the sensor faults. The scheme developed in this paper resolves the problem of the heavy and complex calculations during residual generations and therefore the delay in the isolation process is reduced. The numerical simulations for TSUBAME, a demonstration microsatellite of Tokyo Institute of Technology, are conducted and analyzed to demonstrate the working of the AUKF and FDD subsystem.     

基于剪裁技术考虑的某冲击试验分析

利用环境工程剪裁技术对某冲击试验的结果进行分析,结果表明,按照引用标准评定为"超差"的试验,当考虑到试验件结构的特性并进行必要的数据转换后,试验结果是有效。首先分析造成超差的原因为天线组件的剩余响应,然后通过频域数字滤波进行数据转换。     

运动单站干涉仪相位差直接定位方法

针对传统干涉仪测向定位在低信噪比(SNR)下性能降低、多频段系统复杂等缺点,本文直接利用运动单站干涉仪模糊相位差(PD)实现对地面静止辐射源定位.为解决该定位问题,结合干涉仪相位差的几何特性,提出了一种多角度距离参数化高斯和滤波(MB-RP-GMF)定位解算方法,利用相位差误差检测获得多个初始方位角,通过距离参数化得到一组滤波初始值,采用扩展卡尔曼滤波(EKF)进行定位计算.仿真结果表明,该定位方法在低信噪比下优于仅测向(BO)定位,且仅采用一组干涉仪便可对多个频段辐射源进行定位.     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

在PN码捕获中门限判决对TMA性能影响的分析

文章比较了在单径加性高斯白噪声(AWGN)无衰落信道环境下,利用匹配滤波器(MF)捕获方法,对不同的门限比较判决准则对系统平均捕获时间(TMA)性能的影响进行了分析;同时给出了不同门限值时系统的平均捕获时间的仿真结果,并对结果进行讨论,得出各种门限设置准则的应用环境,为捕获系统的设计与实现提供参考.     

基于自适应深度网络的无人机目标跟踪算法

针对无人机（UAV）视频中目标易受到遮挡、形变、复杂背景干扰等问题，提出一种基于自适应深度网络的无人机目标跟踪算法。首先，基于主成分分析（PCA）和卷积神经网络（CNN）算法，设计3阶的自适应深度网络进行目标特征提取，该网络对图像的H、S、I通道分别进行主成分分析学习，将得到的特征向量输入网络进行分层卷积，优化了网络结构，提高了网络的收敛速度和精度。其次，将目标深度特征输入核相关滤波算法进行目标跟踪，通过分析相邻2帧图像的变化率，采用分段自适应调整学习率的算法进行目标模板更新，有效地改善目标遮挡问题。仿真实验结果表明，该算法有效地避免了复杂因素干扰导致的跟踪精度下降，具有较好的鲁棒性，相较于全卷积跟踪（FCNT）算法平均跟踪精度提高了9.62%，平均跟踪成功率提高了11.9%。     

基于光纤F-P可调谐滤波器的有害气体检测方法

光谱分析法在气体成分监测领域有着广泛的应用,实现小型紧凑高分辨率的光谱测量装置是热门的研究课题。文章创造性的提出了基于光纤法布里-帕罗（F—P）的可调谐滤波器提高吸收光谱分辨率,为构建紧凑高分辨率的光谱仪提供了一种新的方案。基于光纤F-P的可调谐滤波器成功实现了微型光栅光谱仪（分辨率约1nm）对甲烷吸收光谱的测量,对比无光纤F—P可调谐滤波器直接测量的结果,该方法测得的吸收光谱强度至少提高了一个数量级。此研究成果可用于紧凑高分辨率的星载气体检测仪的研制。     

一种遥感图像建筑物检测新方法

遥感图像中的建筑物检测对于土地规划和地图绘制等具有重要意义。文章针对高分辨率全色遥感图像植被覆盖中隐蔽建筑物检测问题,提出了一种结合屋顶结构信息和纹理信息的快速房屋检测方法。首先利用屋顶边缘的几何关系寻找具有矩形屋顶的建筑物;然后使用形态学方法提取屋顶较亮的建筑物;最后利用局部二值模式（Local Binary Pattern,LBP）描述屋顶的纹理特征,并利用支持向量机（Support Vector Machine,SVM）排除误检区域。通过在全色遥感图像集上的试验证明,所提方法对高分辨率遥感图像植被覆盖区域中的建筑物目标具有较高检测率和较低误检率。     

微波光子技术在电子对抗中的应用

由于光子技术的宽带和低损耗优势,微波光子技术已经在电子对抗领域中尤其是在微波信号的产生、处理、控制及传输等方面引起了强烈关注.着重阐述了微波信号的光子方法产生及处理、光子微波滤波器、光真延时波束形成以及光学A/D模数转换等技术,最后给出了结论.