一种基于机动辨识预测的空空导弹导引律

现有的空空导弹导引头在有噪声和干扰的环境下获得目标精确信息存在时间延迟,且新一代目标的机动能力更强,不对导弹加以补偿会造成较大脱靶量,所以需对目标状态有效预测。针对新一代目标规避空空导弹常用的大机动模式,为满足新一代空空导弹发展需求,设计了一种新型复合导引律。从目标自身出发,研究高机动目标规避导弹采用的典型机动形式,对机动轨迹进行离线建模,构建具有扩展能力的目标机动模型库。设计自适应滤波器对测量噪声进行降噪。同时,利用模型库设计了机动辨识预测器,对目标实际机动进行在线辨识。基于在线辨识的结果对目标机动进行预测,并对时间延迟进行补偿和修正,实现对高机动目标的精确打击。仿真结果表明:该方法对不同类型的机动目标均有较高的预测精度和命中精度。     

Noise analysis of continuous GPS coordinate time series for CMONOC

The Crustal Movement Observation Network of China (CMONOC) is one of the major scientific infrastructures, mainly using Global Positioning System (GPS) measurements, to monitor crustal deformation in the Chinese mainland. In this paper, decade-long coordinate time series of 26 continuous GPS sites of CMONOC are analyzed for their noise content using maximum likelihood estimation (MLE). We study the noise properties of continuous GPS time series of CMONOC for the unfiltered, filtered solutions and also the common mode signals in terms of power law plus white noise model. In the spatial filtering, we remove for every time series a common mode error that was estimated from a modified stacking of position residuals from other sites within ∼1000 km of the selected site. We find that the common mode signal in our network has a combination of spatially correlated flicker noise and a common white noise with large spatial extent. We demonstrate that for the unfiltered solutions of CMONOC continuous GPS sites the main colored noise is a flicker process, with a mean spectral index of ∼1. For the filtered solutions, the main colored noise is a general power law process, indicating that a major number of the filtered regional solutions have a combination of noise sources or local effects. The velocity uncertainties from CMONOC continuous GPS coordinate time series may be underestimated by factors of 8–16 if a pure white noise model is assumed. In addition, using a white plus flicker noise model, the median values of velocity errors for the unfiltered solutions are 0.16 (north), 0.17 (east) and 0.58 (vertical) mm/yr, and the median values for the filtered solutions are 0.09 (north), 0.10 (east) and 0.40 (vertical) mm/yr.     

CCD信号采样位置选取方法的研究

针对CCD输出信号中的复位噪声,文章介绍了处理复位噪声较为常用的方法--相关双采样技术,并对相关双采样技术中采样位置选取的方法进行分析和研究,最后进行了实验验证.结果表明:用文中方法选取的采样位置进行相关双采样,可以较好的减小CCD输出信号中复位噪声的影响,提高信噪比.     

空客A320飞机驾驶舱异响故障的排除

针对航线维护中一起不寻常的驾驶舱啸叫故障,参考空客公司的建议,结合实际航线维护经验,总结出系列驾驶舱异常噪声故障的可能来源,对类似故障的排除和隔离具有一定的参考意义。     

SMART STRUCTURES USING PIEZOELEMENTS FOR ACTIVE VIBRATION AND NOISE SUPPRESSION IN AVIATION AND AEROSPACE

具有减振降噪功能的压电智能结构是智能材料与结构的一个重要分支。在航空航天领域存在一些典型结构，如飞机机舱、空间站、卫星太阳能帆板和通讯天线以及直升机旋翼等，其振动与辐射噪声造成很多不利影响。为了研究这些结构的振动与噪声控制方法，制作了几个实验模型如大型薄壁复合材料圆桶、柔性梁、钢架及旋翼系统模型，通过压电传感器、驱动器布置数量和位置的优化，采用不同的控制算法，在基于个人计算机的测控平台上进行了振动控制实验，取得了明显的减振降噪效果。     

An artificial neural network approach for aerodynamic performance retention in airframe noise reduction design of a 3D swept wing model

With the progress of high-bypass turbofan and the innovation of silencing nacelle in engine noise reduction, airframe noise has now become another important sound source besides the engine noise. Thus, reducing airframe noise makes a great contribution to the overall noise reduction of a civil aircraft. However, reducing airframe noise often leads to aerodynamic perfor-mance loss in the meantime. In this case, an approach based on artificial neural network is intro-duced. An established database serves as a basis and the training sample of a back propagation (BP) artificial neural network, which uses confidence coefficient reasoning method for optimization later on. Then the most satisfactory configuration is selected for validating computations through the trained BP network. On the basis of the artificial neural network approach, an optimization pro-cess of slat cove filler (SCF) for high lift devices (HLD) on the Trap Wing is presented. Aerody-namic performance of both the baseline and optimized configurations is investigated through unsteady detached eddy simulations (DES), and a hybrid method, which combines unsteady DES method with acoustic analogy theory, is employed to validate the noise reduction effect. The numerical results indicate not merely a significant airframe noise reduction effect but also excel-lent aerodynamic performance retention simultaneously.     

某型客车噪声源的测试与研究

本文通过对某型客车的噪声测试分析，识别出该型客车的主要噪声源，为进一步采取有效的降噪措施提供了必要依据。     

舰载飞机自动着舰系统设计方法

研究了舰载飞机自动着舰系统（ACLS）的综合设计方法，其中包括油门系统、姿态控制、ACLS控制律、雷达噪声滤波和甲板运动补偿的设计方法。并对ACLS进行了仿真。     

基于滑模干扰观测器的高超声速飞行器滑模控制

首先,针对存在外部干扰和输入饱和的通用式高超声速飞行器的纵向动态模型,提出一种基于滑模干扰观测器的抗饱和滑模控制器。该滑模控制器采用非线性趋近律,在保证系统快速、稳定跟踪指令的同时,能够消除传统滑模控制中的抖振现象,并针对执行器饱和问题,加入抗饱和补偿器,以提高系统的稳定性。其次,对于系统中存在的干扰和不确定性,提出一种滑模干扰观测器,用以准确估计系统中存在的等效干扰,并将该观测器对干扰的估计值应用于滑模控制器中进行补偿,以消除干扰。再次,利用Lyapunov理论对所提出的基于滑模干扰观测器的抗饱和滑模控制器进行稳定性分析。最后,对高超声速飞行器的巡航状态进行仿真。仿真结果表明,所提方法能够有效提高系统的稳定性和抗干扰性,具有一定的实际应用价值。     

基于波动耦合的复杂结构动力响应分析与研究

有限元法(FEM)适合低频分析,统计能量分析(SEA)方法适合高频分析,而一类较宽频带(中频段)的声振响应问题不适合单独用FEM或SEA方法解决。基于波动耦合的混合FE-SEA方法兼顾了FEM与SEA方法的优点,可预测中频段含一定不确定性的声振系统的稳态响应。本文阐释了混合FE-SEA方法的理论,分别通过典型结构的蒙特卡罗仿真与复杂系统的噪声试验两案例对该方法进行了验证,其中梁-板典型结构能量响应计算值与蒙特卡罗仿真值具有较好的一致性;复杂飞行器系统的振动响应与试验结果较为吻合,舱内噪声声压级(SPL)误差小于3dB,证明了混合FESEA方法的有效性,解决了FEM与SEA方法在中频复杂声振响应中的局限性这一问题。