SENSOR FAILURE DETECTION AND SIGNAL RECOVERY BASED ON BP NEURAL NETWORK

Manyhighpefformancecontrolsystemsmusthavefauhtolerantabilityagainstsensorfailures.Theapplicationofprevioussensorfailuredetectinnmethods,mostlybasedonanalyti-calredundancy['Jlislimitedbecausetheyrequireaprecise.mathematicalmedel.BPneuralnetwork(BPNN)isabletolearnanycomplicatedcontinuousnonlinearfunctions,therefore,itcanbeusedtodetectsensorfailuresandrecoverthesignalforthefailedsensor'Recentpubli-cationshavedemonstratedtheuseofBPNNfordetectingsomkindofsensorfailuresandre-coveringthefailedsen…     

一种基于粗糙K-均值的椭球基函数神经网络

改进了一种椭球基函数神经网络,它与经典椭球单元神经网络的结构不同,而与径向基函数神经网络结构类似,即它有一个隐含层,并且隐层单元采用椭球基函数,区别于RBF网络的高斯函数。本文采用粗糙K-均值方法求取椭球函数的中心,并给出了该方法中确定初始阈值的步骤。这种改进方法不但使对输入空间的划分局部作用,而且划分区域封闭有界。因此,改进的神经网络具有较好的函数逼近能力和模式识别能力。仿真实验验证了该椭球基函数神经网络的正确性和有效性。     

基于遗传算法和神经网络的调参控制律设计

飞控系统的设计一般采用调参控制器，针对目前广泛使用的调参控制律增益设计，提出了采用遗传算法计算，然后应用神经网络逼近调参曲线的方法，该方法可以克服传统方法中试凑和插值带来的缺点，对工程应用有一定的参考价值。     

高超声速飞行器预设性能反演控制方法设计

为解决吸气式高超声速飞行器的飞行控制问题,提出了一种新型预设性能神经反演控制器设计方法。通过构造预设性能函数,保证速度跟踪误差和高度跟踪误差能够按照预设的收敛速度、超调量及稳态误差收敛至期望的区域,同时满足系统预设的瞬态性能和稳态精度。在反演控制设计结构下,引入径向基函数（RBF）神经网络对模型未知函数及不确定项进行逼近,提高了控制系统的鲁棒性。引入的RBF神经网络中仅有一个参数需要在线更新,有效提高了控制准确性,避免了通常反演控制方法中经常出现的"微分膨胀问题",并降低了计算量。通过仿真实验验证了所设计控制系统的有效性和可行性。      

基于IPSO-Elman神经网络的飞机客舱能耗预测

为了提高飞机客舱使用地面空调制冷时客舱能耗的预测精度，提出了一种改进的粒子群优化（IPSO）Elman神经网络的飞机客舱能耗预测模型。依据对算法中惯性权重与学习因子的收敛域分析，得出了二者合理的取值范围，将粒子到全局最优位置间距离与参数的取值范围相结合，构造了惯性权重与学习因子的动态调节函数，对其进行非线性的动态调节，并引入了变异因子，提出了一种跳出局部最优的策略，防止粒子群优化（PSO）陷入局部最优。将IPSO-Elman应用于Boeing738飞机客舱能耗预测中，与PSO-Elman、Elman算法进行性能比较，仿真结果表明基于IPSO-Elman的客舱能耗预测模型在预测精度和收敛速度方面均有一定的提升。该研究结果为飞机客舱能耗预测模型的建立提供了理论依据，对飞机地面空调的节能与机场电能合理调配提供了支持。     

Rotating machinery fault diagnosis based on convolutional neural network and infrared thermal imaging

Rotating machinery is widely applied in industrial applications. Fault diagnosis of rotating machinery is vital in manufacturing system, which can prevent catastrophic failure and reduce financial losses. Recently, Deep Learning (DL)-based fault diagnosis method becomes a hot topic. Convolutional Neural Network (CNN) is an effective DL method to extract the features of raw data automatically. This paper develops a fault diagnosis method using CNN for InfRared Thermal (IRT) image. First, IRT technique is utilized to capture the IRT images of rotating machinery. Second, the CNN is applied to extract fault features from the IRT images. In the end, the obtained features are fed into the Softmax Regression (SR) classifier for fault pattern identification. The effectiveness of the proposed method is validated using two different experimental data. Results show that the proposed method has a superior performance in identification various faults on rotor and bearings comparing with other deep learning models and traditional vibration-based method.     

A new bearing fault diagnosis method based on modified convolutional neural networks

Fault diagnosis is vital in manufacturing system. However, the first step of the traditional fault diagnosis method is to process the signal, extract the features and then put the features into a selected classifier for classification. The process of feature extraction depends on the experimenters’ experience, and the classification rate of the shallow diagnostic model does not achieve satisfactory results. In view of these problems, this paper proposes a method of converting raw signals into two-dimensional images. This method can extract the features of the converted two-dimensional images and eliminate the impact of expert’s experience on the feature extraction process. And it follows by proposing an intelligent diagnosis algorithm based on Convolution Neural Network (CNN), which can automatically accomplish the process of the feature extraction and fault diagnosis. The effect of this method is verified by bearing data. The influence of different sample sizes and different load conditions on the diagnostic capability of this method is analyzed. The results show that the proposed method is effective and can meet the timeliness requirements of fault diagnosis.     

基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值，存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave，CW）测试，对无线信号穿墙损耗的影响因素和变化规律进行分析，提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法，对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则，在实际场景下具有良好的预测准确度。     

月球表层采样样品智能确认方法

表层采样是月球采样探测的重要方式，样品智能确认有助于提升工作效率与复杂问题处理能力。结合月球表层采样铲挖工作过程，分析了铲挖过程中臂载相机图像的特点，模仿有人参与识别过程，提出了层次解耦的月球样品智能识别流程，利用深度学习方法构建了一类深度卷积识别网络，完整地描述了图像、特征、标记在网络中的正反传递关系，并在月球表层采样地面试验中进行了验证，结果表明该方法对不同光照、不同背景、不同过程、不同形态的样品，具有较好的泛化识别能力，误识别率优于8.1%，平均单幅识别时间约0.7 s。     

Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization

An efficient method employing a Principal Component Analysis (PCA)-Deep Belief Network (DBN)-based surrogate model is developed for robust aerodynamic design optimization in this study. In order to reduce the number of design variables for aerodynamic optimizations, the PCA technique is implemented to the geometric parameters obtained by parameterization method. For the purpose of predicting aerodynamic parameters, the DBN model is established with the reduced design variables as input and the aerodynamic parameters as output, and it is trained using the k-step contrastive divergence algorithm. The established PCA-DBN-based surrogate model is validated through predicting lift-to-drag ratios of a set of airfoils, and the results indicate that the PCA-DBN-based surrogate model is reliable and obtains more accurate predictions than three other surrogate models. Then the efficient optimization method is established by embedding the PCA-DBN-based surrogate model into an improved Particle Swarm Optimization (PSO) framework, and applied to the robust aerodynamic design optimizations of Natural Laminar Flow (NLF) airfoil and transonic wing. The optimization results indicate that the PCA-DBN-based surrogate model works very well as a prediction model in the robust optimization processes of both NLF airfoil and transonic wing. By employing the PCA-DBN-based surrogate model, the developed efficient method improves the optimization efficiency obviously.