组合升力体动力学建模与仿真

设计了组合升力体总体布局,提出了新的组合升力体建模思路与方法,建立了完整的组合升力体飞行动力学数值仿真模型。建模时综合考虑了主要气动力部件的建模,详细讨论了旋翼／固定翼过渡飞行模式的建模方法。根据提出的建模方法进行了组合升力体的操纵响应分析,仿真结果证明了建模理论和方法的合理性和有效性。     

激波聚焦诱导气液两相爆震燃烧的数值模拟

对以激波聚焦和增加障碍物方式诱导煤油-空气气液两相爆震燃烧的过程进行了数值模拟.采用欧拉-拉格朗日方法建立了脉冲爆震发动机(PDE)中气液两相流的喷射、雾化、掺混过程.研究发现环形爆震波在爆震管凹腔内经过反射、汇聚后能够引燃可燃混合物.而在障碍物处,激波的反射和再反射聚焦能够形成高温高压点(2700K,25MPa),产生局部爆炸,有助于形成稳定的脉冲爆震燃烧(波面速度为1900m/s,温度为2 950K),有效地缩短由缓燃向爆震转变(DDT)距离至0.45m.     

离散粗糙元诱发边界层转捩的实验研究

针对直升机转子叶片模型表面离散粗糙元诱发边界层转捩问题开展了实验研究,分析不同雷诺数下粗糙元尺寸参数对转捩位置的影响。实验在中航工业气动院直升机转子叶片模拟装置进行,在模型转子叶片表面布置不同尺寸的离散柱状粗糙元,利用红外热像技术探测边界层转捩,并提出一种基于湍流／层流区域面积比的转捩位置判定准则,目的是实现边界层转捩位置自动识别,进而分析粗糙元尺寸参数对转捩位置的影响。实验转速为300至600 r／m,对应叶尖切向速度为25～40 m／s。实现了对旋转叶片边界层转捩位置的定量测量,通过实验验证,转捩位置判定算法正确可靠,初步得到了不同高度 DRE 诱发转捩位置与雷诺数之间的关系,随着粗糙元高度的增加,转捩位置逐渐靠前。     

Mining Spatial Associations with Limited Sensory Information

Abstract

Human navigation in an unknown environment requires an understanding of the spatial relationships of the terrain. For example, a soldier who is on a reconnaissance mission in a new city needs to “know” the spatial layout of the surroundings with high confidence. Oftentimes, this understanding must be acquired within a very short amount of time and with limited sensory inputs. The soldier would benefit from a digital avatar that draws inferences about the spatial layout of the city based on an initial set of observations and guides the soldier either in further exploring the environment or in making decisions based on these inferences. In this paper, we present and evaluate an inductive approach to learning spatial associations using sensory data that is available from the simulation environment of a computer game, Unreal Tournament. We study two kinds of spatial relationships between nodes on a level of a game map: nodes that are placed near each other to satisfy some spatial requirement and nodes that are placed near each other to satisfy the design preferences of a level architect. We show that we can infer both kinds of relationships using an association rule mining algorithm. Furthermore, we show how to use an ontology to distinguish between these relationships in order to discover different types of spatial arrangements on a specific map. We discuss how the inferred associations can be used to control an avatar that makes recommendations for navigating unexplored areas on a map. We conclude with some thoughts on the applicability of our methods to scenarios in the real world, beyond the simulation environment of a game, and on how the learned associations can be represented and queried by a simple question-answer type system.     

螺旋弹簧局部振动频率分析与控制

本文首先讨论了单螺旋弹簧局部振动的固有频率的计算方法，在此基础上进一步建立了串联、并联弹簧局部振动的分析模型，并探讨了弹簧局部振动频率的控制方法。     

再入飞行器和模型转换雷诺数计算

本文采用近似的激波关系、球锥体压力分布、平衡气体状态方程、边界层厚度计算公式及转捩准则等,按照流管法计算了4种再入飞行器的外流转捩雷诺数和转捩距离,并给出了高硅氧、碳石英、碳碳球锥模型的转捩雷诺数范围,对再入飞行器和模型的计算结果作了分析和比较。     

轴流压缩系统带支板过渡段的轴对称等效方法

 航空发动机轴流压缩系统过渡段内存在厚支板,该支板造成的堵塞对过渡段的性能产生重要影响,同时也使过渡段内流动成为三维复杂流动,增加了设计难度。建立了一种等效方法,通过构造与带支板过渡段具有相似气动特性的轴对称过渡段,近似地等效原带支板过渡段,从而将复杂的三维问题简化为二维轴对称问题。首先,理论推导了带支板过渡段的轴对称等效方法;随后,通过数值模拟方法,对带支板过渡段和等效过渡段内的流动特性进行对比,结果表明等效过渡段不仅与带支板过渡段的静压分布吻合很好,并且两者具有相似的损失规律,说明等效方法能客观地反映支板对过渡段内流动的影响;最后,将轴对称等效方法应用于带支板过渡段原型的改进设计,改进设计后带支板过渡段支板与轮毂角区的大范围流动分离被消除,损失减小了41.6%。     

Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

硼酸盐玻璃中稀土离子的发光研究

应用荧光光谱、红外振动光谱等研究了在可见光区发光的Ｐｒ（３＋），Ｓｍ（３＋），Ｅｕ（３＋），Ｔｂ（３＋），Ｄｙ（３＋），Ｅｒ（３＋）和Ｔｍ（３＋）等镧系稀土离子在硼酸盐玻璃中的发光行为，系统地分析了稀土离子在硼酸盐玻璃基质中的激发谱和发光谱特性。     

液化天然气作为航空燃料的发展趋势及特点分析

为研究液化天然气(LNG)作为航空燃料的可行性,对LNG的特点、发展趋势及作为航空燃料存在的问题进行了分析.采用了横向比较的方法,将LNG与新的航空替代燃料和传统航空燃料进行了比较和计算分析.结果表明:与新的航空替代燃料相比,LNG具有来源广泛、经济性好、发动机适应性强等优点.与传统航空燃料相比,LNG的储量大,可使用100年以上;可燃极限宽、污染物排放低,NOx排放仅为航空煤油的1/4;单位质量能量密度高、成本低,其燃料成本仅为航空汽油的一半,航空煤油的1/3;同时还具有可用于发动机高温部件冷却用的冷能,是一种极富潜力的航空燃料.指出在LNG作为航空燃料方面急需开展动力系统与飞机结构的匹配、燃料相态的有效转化及不同燃料在燃烧室内的反应特性等方面的研究工作.