A320飞机在低速滑行中滑偏的处理

A320系列飞机在运行中有时会出现低速滑行时滑偏的现象,给航班的安全、正点运行带来了很大的压力.本文分析了引起滑偏的原因,给出针对此类故障的快速处理建议及排故方法,以期节省排除此类故障的时间,对缓解航班运行压力提供帮助.     

PREDICTION OF SURFACE ROUGHNESS FOR END MILLING TITANIUM ALLOY USING MODIFIED PARTICLE SWARM OPTIMIZATION LS-SVM

It is difficult to construct the prediction model for titanium alloy through analyzing the formation mecha- nism of surface roughness due to the complicated relation between influential factors and surface roughness. A no- vel algorithm based on the modified particle swarm optimization （PSO） least square support vector machine （LS- SVM） is proposed to predict the roughness of the end milling titanium alloys. According to Taguchi method and features in milling titanium alloys, the influences of cutting speed, feed rate and axial depth of cut on surface roughness are investigated with the analysis of variance （ANOVA） of the experimental data. The research results show that the construction speed of the modified PSO LS-SVM model is two orders of magnitude faster than that of back propagation（BP） model. Moreover, the prediction accuracy is about one order of magnitude higher than that of BP model. The modified PSO LS-SVM prediction model can explain the influences of cutting speed, feed rate and axial depth of cut on the surface roughness of titanium alloys. Either a higher cutting speed, a lower feed rate or a smaller axial depth of cut can lead to the decrease of surface roughness.     

谈谈环境工程剪裁和环境试验剪裁

文章简要阐述环境工程剪裁和环境试验剪裁产生的历史背景,环境工程剪裁和环境试验剪裁的定义及其内涵;指出了环境工程剪裁的目的和任务;以表的形式列出了MIL-STD-810F和GJB 150A中相应部分的剪裁要求并进行了对比分析,指出了两标准在剪裁阐述上的不足之处;最后分析了810F前言中有关剪裁的内容和各试验方法的可剪裁程度。     

含能热塑性聚氨酯推进剂的能量计算与分析

采用最小自由能法,在标准条件(pc/p0=70∶1)下,比较了用不同软硬段结构的含能热塑性聚氨酯弹性体(ET-PU)作粘合剂的复合推进剂的能量特性,从要获得较高能量水平的观点,排列出了几种ETPU选择的先后次序;计算了含ETPU的各类推进剂的能量特性参数,探讨了ETPU对硝酸酯增塑的复合推进剂和硝胺改性双基推进剂的能量特性的影响规律。结果表明,选用不同ETPU的复合推进剂配方相互间在能量特性上存在着差别,但这种差别并不十分显著,以GAP为软段、TDI为硬段的ETPU,更有利于配方获得较高的能量水平;硝酸酯增塑的ETPU推进剂的理论能量水平高于丁羟推进剂,随增塑比逐渐增大,推进剂的最大理论比冲随之增大,固含量逐步降低;少量ETPU的加入,对硝胺改性双基推进剂的能量特性影响不大,增加Al和RDX含量,更有利于提高含ETPU的硝胺改性双基推进剂的能量水平。     

微量Al 掺杂对2D C/ SiC 性能的影响

以二维编织碳纤维碳布为预制体,采用聚铝碳硅烷(PACS)为聚合物前驱体,应用化学气相渗透(CVI)结合聚合物浸渗-裂解(PIP)工艺制备微量Al掺杂2D C/SiC复合材料。研究微量Al掺杂对C/SiC微观结构、力学、热膨胀和氧-乙炔焰烧蚀性能的影响。结果表明:掺杂微量Al未改变C/SiC的微观结构和热膨胀性能,也未降低其韧性和强度;但微量Al掺杂提高了C/SiC的抗烧蚀性能,含微量Al的SiC氧化形成微量Al熔于SiO2的固熔体,微量Al提高了SiO2的黏度和致密度,减小SiO2挥发,较未掺杂Al的C/SiC相比,线烧蚀率降低了26%。     

旋翼跨音速非定常黏性绕流的高效CFD模拟方法

为提高旋翼跨音速黏性绕流CFD模拟的效率,建立了一套基于隐式LU-SGS算法和OpenMP并行策略的旋翼非定常流场高效数值求解方法。首先,基于二维剖面翼型的Poisson方程求解和网格插值、翻折方法生成绕桨叶的O-C-O型贴体正交网格,并采用高效的"扰动衍射"(Disturbance diffraction method,DDM)挖洞方法、并行化″Inverse map″(IM)的贡献单元搜索方法,构建了旋翼运动嵌套网格系统。在此基础上,以耦合S-A湍流模型的非定常RANS方程为主控方程,对流通量采用高精度的Roe-MUSCL格式进行离散,时间推进采用隐式LU-SGS双时间方法,同时采用OpenMP并行策略加速旋翼流场求解。最后,运用所建立的方法分别对悬停ONERA 7A旋翼、前飞Caradonna-Tung(C-T)旋翼无升力状态及SA349/2旋翼有升力状态的气动特性及涡尾迹特征进行了模拟,通过与试验值对比验证了文中方法在旋翼非定常流场CFD模拟中的有效性和高效性。     

LXI仪器的LAN设置及控制

在介绍了LXI仪器类型、Non Auto-MDIX含义、Agilent33220A函数发生器性能和功能的基础上,以33220A函数/任意波形发生器的LAN接口设置为例,描述了其LAN接口DHCP,Auto IP,IP Address,SubnetMask,Default Gateway,Host Name,Domain Name,DNS Server,Password等参数的含义、设置方法,介绍了充分利用其提供的接口功能,达到远程控制其输出的方法。该方法达到了通过GPIB控制函数/任意波形发生器的同样效果,利用其LAN接口组建分布式测试系统,对程序设计者具有较高的参考借鉴价值。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

基于μC/OS-Ⅱ的串口通信在S3C2410A上的实现

文章在三星公司的嵌入式处理器S3C2410A为核心的硬件平台上,将嵌入式实时操作系统μC/OS-Ⅱ和μC/GUI在ARM9上整合实现,成功地实现了基于μC/OS-Ⅱ在S3C2410A上的双向串口通信功能。     

q-一致光滑Banach空间中的严格伪压缩映像

提出一种不用投影算子的修正的Mann遮代的循环算法,用于逼近q-一致光滑的Banach空间中有限个严格伪压缩映像的公共不动点,并证明了算法的强收敛性。本结论推广了Kim等和Zhang等关于非扩张映像的相应结果。