Assessment of improvement of the IRI model over Ethiopia for the modeling of the variability of TEC during the period 2013–2016

This paper discusses the monthly and seasonal variation of the total electron content (TEC) and the improvement of performance of the IRI model in estimating TEC over Ethiopia during the solar maximum (2013–2016) phase employing as reference the GPS derived TEC data inferred from four GPS receivers installed in different regions of Ethiopia; Assosa (geog 10.05°N, 34.55°E, Geom. 7.01°N), Ambo (8.97°N, 37.86°E, Geom. 5.42°N), Nazret (8.57°N, 39.29°E, Geom. 4.81°N) and Arba Minch (6.06°N, 37.56°E, Geom. 2.62°N). The results reveal that, in the years 2013–2016, the highest peak GPS-derived diurnal VTEC is observed in the March equinox in 2015 over Arba Minch station. Moreover, both the arithmetic mean GPS-derived and modelled VTEC values, generally, show maximum and minimum values in the equinoctial and June solstice months, respectively in 2014–2015. However, in 2013, the minimum and maximum arithmetic mean GPS-derived values are observed in the March equinox and December solstice, respectively. The results also show that, even though overestimation of the modelled VTEC has been observed on most of the hours, all versions of the model are generally good to estimate both the monthly and seasonal diurnal hourly VTEC values, especially in the early morning hours (00:00–03:00?UT or 03:00–06:00?LT). However, it has also been shown that the IRI 2007 and IRI 2012 versions generally perform best in matching the diurnal GPS derived TEC values as compared to that of the IRI 2016 version. In addition, the IRI 2012 version with IRI2001 option for the topside electron density shows the highest overestimation of the VTEC as compared to the other options. None of the versions of the IRI model are proved to be able to capture the effects of geomagnetic storms.     

基于最少可用飞机数的航班编组计划

研究了航空公司在运力紧张状况下的航班编组计划问题.首先根据单枢纽航线结构的特点,将航班编组计划问题转化为在枢纽机场的航班节编组问题,然后通过构造描述航班节间衔接关系的传递图,并利用传递图与其对应无向偶图的关系,将需用飞机数最少的航班节编组计划问题转化为求对应无向偶图的最小权最大匹配,从而构造出一个解决运力紧张状况下航班编组计划的多项式算法.最后通过一个算例说明了该算法的应用.     

一种实现飞行品质参数实时辨识的实用方法

考虑到辨识算法收敛的可靠性及结果的精度，采用递推最小二乘估计、飞机运动模态连续－离散模型相互转换及递推极大似然估计，实现飞行品质参数的实时辨识。这种方法的优点在于算法的吸收域是全平面的。初值不影响算法的收敛性，能很好地满足实时性要求，同时还保证了结果精度。利用该方法对某型飞机铁鸟台实测数据进行了处理，取得了满意的结果。     

低频噪声源的测试方法

介绍了针对低频噪声源三种参数的测试方法.讨论了低频噪声源的最大输出功率、噪声输出幅度以及噪声带宽测试的实现途径.     

Interactive Multi-objective Optimization Design for the Pylon Structure of an Airplane

The pylon structure of an airplane is very complex, and its high-fidelity analysis is quite time-consuming. If posterior preference optimization algorithm is used to solve this problem, the huge time consumption will be unacceptable in engineering practice due to the large amount of evaluation needed for the algorithm. So, a new interactive optimization algorithm-interactive multi-objective particle swarm optimization （IMOPSO） is presented. IMOPSO is efficient, simple and operable. The decision-maker can expediently determine the accurate preference in IMOPSO. IMOPSO is used to perform the pylon structure optimization design of an airplane, and a satisfactory design is achieved after only 12 generations of IMOPSO evolutions. Compared with original design, the maximum displacement of the satisfactory design is reduced, and the mass of the satisfactory design is decreased for 22%.     

俯仰敏捷性评估与影响因素研究

建立了现代高机动性能战斗机俯仰敏捷性仿真计算数学模型和机动飞行时的操纵动作，以Ｆ－１６战斗机为例，计算并讨论了初始飞行状态以及飞行控制系统参数对战斗机俯仰敏捷性的影响。结果表明，选择适当的飞行状态，有利于更好地发挥飞机的俯仰敏捷性；降低飞机整体系统的阻尼，将有利于提高飞机的俯仰敏捷性；控制系统有关参数的设计，除考虑飞行品质要求外，还需综合考虑飞机敏捷性等方面的要求。     

一类解决变应力加速寿命试验参数估计的方法

变应力加速寿命试验的极大似然函数是高维非线性复杂目标函数,其待估参数多,采用梯度下降优化方法进行参数估计容易陷入局部极值,而采用全局优化方法又存在寻优效率低的问题.为了解决复杂多维目标函数优化的瓶颈问题,设计了一种基于实数编码遗传算法和Powell法的遗传加速方法.利用适应度函数获得两种优化方法的最佳切换点,最大程度发挥遗传算法和Powell算法的优点,既提高了多维非线性目标函数寻优效率又保证了参数估计的全局最优.液压泵加速寿命试验实例分析结果表明,遗传加速方法可以在寻优前期利用遗传算法保证待估参数的全局最优估计,在寻优后期快速逼近最优值,使寻优成功率达到85%.     

基于场路耦合方法的永磁同步电机温度场研究

针对永磁同步电机温度场精确求解问题,提出了一种场路耦合法来计算电机的温度场。以一台永磁同步电机为研究对象,利用MATLAB/Simulink搭建电机的控制策略,再通过有限元分析软件ANSYS Maxwell和ANSYS Simplorer搭建电机的二维电磁场模型和控制电路模型组成场路耦合模型。基于场路耦合模型计算电机的损耗,并将损耗导入到电机的三维磁热耦合模型中,观测电机在基速工况和弱磁范围内温度场的变化。通过样机实验测试,验证了该方法的精确度,为精确求解电机的温度场提供了依据。     

压力波对垂直管低温气液掺混冷凝的影响

为了分析高压补燃液氧煤油发动机氧泵间管内气液两相掺混冷凝及其压力波传播过程,建立了可产生压力扰动的垂直管低温气液两相掺混实验系统,以氧气/液氧为实验工质,开展压力波对垂直管内低温气液两相掺混冷凝的影响研究,获得了不同压力波频率和氧气流量工况下的掺混图像,分析结果表明:压力波会使发散流型由微弱振荡冷凝向间歇振荡冷凝转变,使椭圆流型由稳定冷凝向振荡冷凝转变;在0~52 Hz不同频率压力波作用下,发散流型最大轴向冷凝长度与掺混孔径之比在10~30之间,椭圆流型的比值在8~15之间变化;压力波对气相摆动频率起主导性和正相关性的影响。     

主动失谐叶盘振动特性及鲁棒性研究

由于随机失谐的存在,实际叶盘通常一定程度地偏离设计值,其动力学特性通常因此而发生较大改变。以某型航空压气机高保真叶盘模型为例,采用失谐叶盘减缩建模方法,对不同阶次激励下的随机失谐叶盘响应特性进行了统计分析。研究表明:叶盘最大响应随着随机失谐值的增大呈先急剧上升后下降并趋于稳定趋势,表现"阀值"效应。此外,将失谐作为设计参数,着重研究了常见的主动失谐叶盘的响应特性,可见主动失谐叶盘相较于同等失谐程度的随机失谐叶盘具有更小的响应幅值。最后,分析了主动失谐叶盘对随机失谐的鲁棒性。