不同雷诺数下翼型气动特性及层流分离现象演化

低雷诺数下空气黏性效应突出,翼型表面普遍存在层流分离现象,相比常规雷诺数情况气动特性显著恶化。采用带预处理的Roe方法求解非定常可压缩Navier-Stokes方程的数值模拟技术和低雷诺数低湍流度风洞油流显示试验技术,对FX63-137翼型不同雷诺数下气动特性和流动结构展开深入研究。通过风洞油流显示试验可以清晰获得低雷诺数层流分离流动的两道油流汇集线。数值模拟结果表明其分别为时均化主分离线和二次分离线,两种结果定性定量均吻合较好,证明了本文的研究方法有效可靠;雷诺数从500 000降至20 000,翼型气动特性和层流分离流动结构均发生显著的变化,伴随阻力系数剧增和升力系数剧降,时均化流动结构从附体至出现经典的长层流分离泡,并最终演化为后缘层流分离泡,相应的两种分离泡的非定常流动结构也存在显著差异;对于阻力系数和升力系数而言,存在不同的临界雷诺数,因为导致阻力系数剧增的机理在于经典长层流分离泡的产生使翼型压差阻力大增,而造成升力系数剧降的主要原因在于后缘层流分离泡使得等效翼型后部弯度减小;非定常结果显示正是由于翼型表面漩涡周期性的生成与脱落,才造成了低雷诺数下升力系数的周期性波动。翼型上表面主分离涡即将脱落时,流线在后缘附近再附,升力系数达到峰值;而当流体从下表面向上卷起二次分离涡时,尾部流线大尺度分离,升力系数降至谷值。     

Earth observation from space – The issue of environmental sustainability

Remote sensing scientists work under assumptions that should not be taken for granted and should, therefore, be challenged. These assumptions include the following:1. Space, especially Low Earth Orbit (LEO), will always be available to governmental and commercial space entities that launch Earth remote sensing missions.2. Space launches are benign with respect to environmental impacts.3. Minimization of Type 1 error, which provides increased confidence in the experimental outcome, is the best way to assess the significance of environmental change.4. Large-area remote sensing investigations, i.e. national, continental, global studies, are best done from space.5. National space missions should trump international, cooperative space missions to ensure national control and distribution of the data products.At best, all of these points are arguable, and in some cases, they're wrong. Development of observational space systems that are compatible with sustainability principles should be a primary concern when Earth remote sensing space systems are envisioned, designed, and launched. The discussion is based on the hypothesis that reducing the environmental impacts of the data acquisition step, which is at the very beginning of the information stream leading to decision and action, will enhance coherence in the information stream and strengthen the capacity of measurement processes to meet their stated functional goal, i.e. sustainable management of Earth resources. We suggest that unconventional points of view should be adopted and when appropriate, remedial measures considered that could help to reduce the environmental footprint of space remote sensing and of Earth observation and monitoring systems in general. This article discusses these five assumptions in the context of sustainable management of Earth's resources. Taking each assumption in turn, we find the following:(1) Space debris may limit access to Low Earth Orbit over the next decades.(2) Relatively speaking, given that they're rare event, space launches may be benign, but study is merited on upper stratospheric and exospheric layers given the chemical activity associated with rocket combustion by-products.(3) Minimization of Type II error should be considered in situations where minimization of Type I error greatly hampers or precludes our ability to correct the environmental condition being studied.(4) In certain situations, airborne collects may be less expensive and more environmentally benign, and comparative studies should be done to determine which path is wisest.(5) International cooperation and data sharing will reduce instrument and launch costs and mission redundancy. Given fiscal concerns of most of the major space agencies – e.g. NASA, ESA, CNES – it seems prudent to combine resources.     

基于LabVIEW的通信系统的构建

本设计基于LabVIEW仿真软件完成了基本通信系统和通信综合系统的构建。该系统涵盖了模拟调制,数字调制,模拟信号数字传输,信道编码,最佳接收系统几部分内容。通过系统仿真,实现了系统输入输出波形的直观显示,解决了教学中实验效果不理想,理论内容不好理解的问题。同时通过内置的Web Server进行网页发布后,用户可以在客户...     

用加权几何精度因子选星的GPS抗多径定位方法

在ＧＰＳ（Ｇｌｏｂａｌ ｐｏｓｉｔｉｏｎｉｎｇ ｓｙｓｔｅｍ）中普遍用几何精度因子（Ｇｅｏｍｅｔｒｉｃ ｄｉｌｕｔｉｏｎ ｏｆ ｐｒｅｃｉｓｉｏｎ，ＧＤＯＰ）来选星，但对近距差分ＧＰＳ，多径干扰已变成了主要误差源，传统的ＧＤＯＰ值选星不是最佳的。为减小多径误差，文中提出了一种新的加权ＧＤＯＰ值选星方法。在仿真验证过程中，分析了多径的几何传播机理，并考虑了抗多径天线的抑制效应。仿真结果表明，用加权Ｇ     

基于LabVIEW的通信系统的构建

本设计基于LabVIEW仿真软件完成了基本通信系统和通信综合系统的构建。该系统涵盖了模拟调制,数字调制,模拟信号数字传输,信道编码,最佳接收系统几部分内容。通过系统仿真,实现了系统输入输出波形的直观显示,解决了教学中实验效果不理想,理论内容不好理解的问题。同时通过内置的Web Server进行网页发布后,用户可以在客户端通过web浏览器远程调用并运行本系统,提高效率,节约成本。     

Solar cycle variation of “killer” electrons at geosynchronous orbit and electron flux correlation with the solar wind parameters and ULF waves intensity

To construct models for hazard prediction from radiation belt particles to satellite electronics, one should know temporal behavior of the particle fluxes. We analyzed 11-year variation in relativistic electron flux (E>2 MeV) at geosynchronous orbit using measurements made by GOES satellites during the 23rd sunspot cycle. As it is believed that electron flux enhancements are connected with the high-speed solar wind streams and ULF or/and VLF activity in the magnetosphere, we studied also solar cycle changes in rank order cross-correlation of the outer radiation belt electron flux with the solar wind speed and both interplanetary and on-ground wave intensity. Data from magnetometers and plasma sensors onboard the spacecraft ACE and WIND, as well as magnetic measurements at two mid-latitude diametrically opposite INTERMAGNET observatories were used. Results obtained show that average value of relativistic electron flux at the decay and minimum phases of solar activity is one order higher than the flux during maximum sunspot activity. Of all solar wind parameters, only solar wind speed variation has significant correlation with changes in relativistic electron flux, taking the lead over the latter by 2 days. Variations in ULF amplitude advance changes in electron flux by 3 days. Results of the above study may be of interest for model makers developing forecast algorithms.     

基于电流注入法的加速度表测试方法研究

针对不同结构的加速度表 ,从理论上研究了利用电流注入法模拟加速度表运动特性的方法 ,研究了加速度表接入闭环测试系统后的相关问题 ,为加速度表的动态测试提供了新的方法     

分布式航天器相对位置测量平台设计

分布式航天器间相对位置的实时高精度测量是分布式航天器实现空间队形保持的关键技术之一。为了对相对位置测量方法进行研究、分析和论证，建立了分布式航天器相对位置测量地面实验平台。介绍了分布式航天器相对位置测量和解算的基本原理；论述了仿真平台的组成和功能；基于仿真平台对相对位置测量精度进行了仿真试验，试验结果显示该平台具有良好的性能指标；最后介绍了相对位置解算仿真评估软件的设计方法。     

基于实时交易系统中间件的设计与实现

实时交易系统是一种基于客户 /服务器模式的应用系统。随着人们对实时交易系统的可扩展性和性能的需求 ,两层客户 /服务器模式难以满足系统要求。中间件技术的产生和发展给两层客户 /服务器模式注入了新的活力     

基于模型的载人航天器研制方法研究与实践

载人航天器具有系统规模大、技术难度高、单件小批量、无法通过多次飞行持续完善设计、可靠性要求高等特点。当前载人航天器研制中仍存在着参数化和模型化程度不高、基于模型的系统综合仿真验证不足、研制各环节缺乏数字化集成等问题，传统基于文本的系统工程方法已无法满足研制需求，亟需采用基于模型的系统工程方法。本文针对载人航天器的研制现状和应用需求，提出了面向载人航天器全生命周期的模型体系，定义了需求模型、功能模型、产品模型、工程模型、制造模型、实做模型等六类模型，提出了基于模型的研制流程，包含系统设计闭环验证、产品设计闭环验证、实做产品闭环验证3个验证环节，并深入探索了各研制环节中不同模型间的传递与关联关系。以某型号载人航天器为应用基础，系统地验证了提出的方法。