旋翼桨叶动力学设计技术

桨叶动力学设计,其实质是求解非线性高维动力学逆问题的具体实施。本文较全面地阐述了这方面的进展情况,提出了切实可行、有效实用的数值方法。     

基于代理模型的大型民机机翼气动优化设计

先进的气动优化设计思想与方法，对于提升大型民机气动与综合性能具有至关重要的意义。探讨了大型民机超临界机翼气动优化设计的基本准则和要点，并结合代理优化算法，提出了一种面向工程应用的多轮次高效全局气动优化设计方法。首先，通过一系列解析函数/翼型/机翼优化测试算例进行了验证。其次，将所提出的方法与人工修型相结合，开展了针对宽体客机超临界机翼的两轮气动优化设计，使其气动性能得到显著改善。最后，采用不同的雷诺平均Navier-Stokes（RANS）方程求解器对安装优化机翼的全机巡航构型进行了典型状态的气动性能综合评估。研究结果表明，所提出的代理优化算法具有很高的优化效率、较强的约束处理和全局优化能力；将所发展的基于代理模型的多轮次气动优化设计方法与人工修型相结合，能够获得满足设计要求的气动外形，验证了该方法在大型民机超临界机翼气动设计中的有效性和工程实用性。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

大后掠机翼翼尖导弹动力响应空测与数据分析

 <正> 大后掠机翼翼尖挂导弹对外界干扰的动力响应很灵敏,这种干扰主要来自随机不稳定气流或各种突加载荷。为保证安全和防止导弹失控,摸清其响应值非常必要;除理论计算外,对可能遇到的不平稳气流和突加载荷在翼尖导弹上的动力响应进行了空测,并用频谱分析和功率谱密度分析处理了空测数据,制订了翼尖导弹振动与冲击试验谱,进行了地面试验与空中打靶试验,获得了满意结果。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

ISAR欺骗干扰效果评估方法研究

逆合成孔径雷达（ISAR）能够获取运动目标的一维像和二维像,利用宽带特征识别出真实空间目标.宽带成像欺骗干扰是对抗ISAR雷达目标识别的有效措施.构建了基于目标结构特征的ISAR欺骗干扰效果评估体系,提出了相应的干扰效果评估准则,研究了ISAR欺骗干扰效果评估方法.利用仿真评估软件进行仿真分析,验证了评估方法的合理性.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。