基于HLA的防空导弹武器系统仿真平台研究

介绍了一个以防空导弹武器系统为背景,基于高级体系结构(HLA, High Level Architecture)技术实现的包含虚拟现实技术的综合仿真平台.着重论述了该仿真平台的构成、开发过程及其关键技术,包括HLA、基于FEDEP(Federation Development and Execution Process)模式的开发过程,层次化软件结构、计算机生成兵力(CGF, Computer Generated Forces)技术、面向对象建模以及基于包围盒的碰撞检测等.     

高强钛合金中的微动损伤与疲劳

本文对高强钛合金Ti-10V-2Fe-3Al在不同温度下的微动损伤和疲劳特性进行了研究。试验结果表明,该合金对微动损伤十分敏感,常温疲劳强度下降达50％。微动损伤的主要机制是疲劳脱层,这是由作用在材料次表层的交变切应力引起的,它将导致疲劳裂纹的萌生和早期断裂。疲劳裂纹的扩展方向可根据接触应力分析得到解释。在较高试验温度下,由于接触面形成的氧化层的保护作用,微动损伤程度减弱。     

广播电视卫星高精度时间传递

介绍一种利用我国广播电视卫星进行高精度时间传递的方案,建立多个卫星电视时间发播系统,利用广播电视卫星进行双向时间比对,实现远距离卫星地面站之间的时间同步。通过测量地面站到卫星之间的距离,可实时计算出卫星的坐标位置,用户根据接收到的时间及卫星位置信息,实施高精度定时。     

电沉积镍基复合镀层的高温抗氧化性

 <正> 用电沉积法制备复合镀层是近年来表面工程的一项新技术,它使制件表面获得高温条件下的耐磨、减摩和某些特殊功能方面,显示出很大的优越性。其中尤以镍为基体的复合镀层使用得最为普遍。在高温条件下大气中使用的复合镀层,必须具有优良的抗氧化性。因为复合镀层中含一定量的分散相,既改善基体金属的某些性质,同时也破坏了基体金属的化学均一性,从而影响着镀层的抗氧化能力。本文选择Ni-B_4C、Ni-TiC、Ni-ZrO_23种复合镀层,探索在高温下氧化行为的特征。     

表面再结晶对定向凝固高温合金高周疲劳行为的影响

采用悬臂旋转弯曲试验,研究定向凝固DZ4合金在喷丸预变形及热处理后产生的再结晶层对高周疲劳寿命的影响.结果表明,DZ4合金经过一定程度的预变形,在随后的高温热处理后表面会产生一定厚度的再结晶;再结晶层对DZ4合金高周疲劳寿命有一定影响;在一定喷丸强度范围内,随喷丸强度增加,疲劳寿命先减小后增大.     

大迎角下鸭翼涡与边条涡的干扰特性

 在风洞测力、水洞染色线和激光片光实验的基础上 ,对翼身组合体鸭翼边条翼布局大迎角涡系干扰机理进行了分析和探讨 ,揭示了该布局增升的机理。鸭翼涡位于机翼内侧 ,其与边条涡的相互诱导致使边条涡向外翼偏折 ,既改善了外翼的流态 ,又使机翼前缘涡量卷入边条涡 ,增强了边条涡的强度 ,从而延迟其破裂。两方面的共同作用 ,提高了主翼的涡升力 ,起到增升作用。     

F-16飞机大迎角飞行偏离/尾旋特性分析

通过俯仰力矩系数随迎角的变化对F－16飞机的气动特性进行分析，并对其中大迎角时的偏离特性进行了剖析，通过计算给出了F－16飞机的m^βx,m^βy,m^δy,m^δyx,m^δyy,m^δyxy以及侧滑偏离参数（m^βydyn)和横向操纵偏离参数（LCDP）随迎角的变化曲线，最后通过m^βydyn和LCDP的综合，预测了F－16飞机的偏离特性，同时通过计算对尾旋运动特性和改出特性进行了研究，为分析F－16飞机大迎角飞行特性提供了理论依据。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

热处理对二次锻造高Nb-TiAl基合金组织的影响

研究了热处理对二次锻造高Nb-TiAl基合金组织的影响。通过对Ti-45Al-9(Nb,W,B,Y)金属间化合物进行不同的热处理,得到不同的显微组织。结果表明,经1310℃/20min+1250℃/2h/AC热处理后,β相被有效地消除,得到细小均匀的双态组织。此后直接加热到α单相区,得到条带状的全片层组织。增加在两相区的停留,得到相对比较均匀细小的全片层组织。将锻造组织先转变为近γ组织再进行全片层组织处理,得到最均匀细小的全片层组织。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.