基于FC-1394的空间载荷试验信息系统设计

IEEEl394是一种具有支持等时传输和异步传输的特点的高速串行数据总线,目前已在航天器载荷试验数据传输中得到良好应用,但在未来大型空间飞行器载荷试验信息传输的应用中仍存在重量功耗开销大、传输距离和速率有限等问题.光纤通道作为一种具有良好兼容性、可靠性高、低时延、传输距离远和传输速率高等优点的先进总线技术,可为上层协议提供通用的高速率数据传输通道.基于IEEEl394和光纤通道的基本特性,给出了一种适用于空间载荷试验信息系统的FC-1394桥接方案,并为基于IEEE1394和光纤通道协议映射的空间信息系统数据网络互连提供了一种解决方案.     

表面处理对三维浅交弯联机织复合材料界面及弯曲性能的影响

以2400 tex无捻玻璃纤维粗纱为原料,在SGA598型三维织机上制备出一种三维浅交弯联机织复合材料预制体,使用硅烷偶联剂KH-570作为表面活性剂,采用涂抹、浸泡的方法对预制体进行表面处理以改善复合材料的界面性能。以环氧树脂E51和固化剂聚醚胺WHR-H023以质量比3∶1的比例组成树脂体系,并将经过表面处理的预制体与树脂基体以质量比1∶1的比例通过手糊的方式复合成型,制得三维浅交弯联机织复合材料。分别借助傅里叶红外光谱仪、原子力显微镜、万能材料试验机、扫描电镜等仪器来测试与验证KH-570对预制体及复合材料的处理效果。结果表明,经过KH-570处理后,预制体表面粗糙度增大、比表面积增加,从而使得纤维与树脂界面结合更加紧密;复合材料的弯曲性能随着KH-570的增加而增强;复合材料主要破坏形式为纤维断裂,纤维在树脂中抽拔现象较少。     

基于Helmholtz的低感抗电子束偏转扫描线圈仿真

为了提高电子束偏转扫描频率和磁场均匀性,采用Helmholtz空心线圈结构设计了一种低感抗电子枪偏转扫描线圈。采用ANSYS有限元分析软件对偏转扫描线圈的电磁场分布进行仿真,并采用高斯计对线圈内部的电磁场进行了测量,仿真结果与实际测量值基本吻合,线圈内部的磁感应强度大小和电磁场分布的均匀性可以满足电子束高频偏转扫描的要求。实际扫描试验表明,该线圈实现了两点电子束高频偏转扫描,扫描频率可达30 k Hz。     

Resistance Spot Welding Method for Metal-Based Fiber Bragg Grating Sensors

Aiming at the requirements of installation and work environment of metal-based fiber Bragg grating(FBG)sensor,a resistance spot welding method is presented.Firstly,the effect of welding parameters on welding quality is discussed theoretically,and a suitable resistance spot welding method for the metal-based FBG sensor is proposed for the first time.Then through serial resistance spot welding tests,the feasibility and practicability of the method are verified,and optimal welding parameters for two different tested metals are obtained.Fatigue performance test validates FBG sensors installed by the proposed method with good fatigue properties and long-term stable measurement performance.The research results can provide technical guidance for engineering structure long-term safety monitoring.     

A novel wireless light sensing device for planetary and astronomical observations

A novel and versatile wireless light sensing device has been designed and tested for stellar and planetary photometric observations. The device weighing few 10 s of grams finds a number of potential applications in the fields of astronomy and in situ planetary exploration. A Wireless Sensor Network (WSN) using a number of these devices has been deployed to successfully carry out simultaneous photometric observations under different conditions viz. sunlight, twilight, moonlight etc. Observation of a star of known magnitude for flux calibration at low intensity has been carried out by coupling the device to a 1.2 m telescope which demonstrates its sensitivity. A WSN using these devices is further capable of spatio-temporal investigations of sky background intensities. Such a network can also be used to effectively monitor certain astronomical events (lunar eclipse, asteroid occultation etc.) simultaneously from several locations. The capability of the device, level of miniaturization and its versatility makes it a potential tool for many photometric applications.     

可变弯度机翼后缘形态重构光纤监测技术

可变弯度机翼是一种变翼型变体飞行器，在飞行过程中可根据不同的飞行环境自适应调整机翼弯度来提高飞行效率，从而适应复杂多样的任务环境。针对可变弯度机翼后缘形态与偏转角度实时监测需求，研究了一种基于光纤布拉格光栅传感器的机翼后缘形态重构方法。采用数值仿真方法分析可变弯度机翼后缘的形态变化特征，得到可变弯度机翼后缘偏转位移与偏转角度之间关系。给出光纤布拉格光栅传感器布局形式，构建了基于应变和曲率信息递推位移重构原理的机翼后缘形态和偏转角度监测系统。基于光纤布拉格光栅传感器的机翼后缘形态重构相对误差约为6.39%，偏转角度辨识相对误差约为7.47%。研究结果表明，所提方法能够为可变弯度机翼后缘形态感知、姿态自适应调整以及气动外形优化提供技术支撑。     

Cracking and Mechanical Properties of Airport Concrete Pavement with Fiber and Expansive Agent

Polypropylene fiber and expansive agent are used in airport concrete to improve its shrinkage cracking resistance and mechanical properties. The concrete specimens with amount content of polypropylene fiber or expansive agent or both of them are prepared. The morphology of specimens is observed by scanning electron microscope, the time when the first crack occurred is recorded through slap test, and the mechanical properties such as compressive strength and impact energies of concrete are measured. The results show that polypropylene fiber in concrete can reduce the shrinkage and delay the first crack, improve the impact resistance obviously, and improve the compressive strength slightly. Expansive agent can compensate the shrinkage and reduce cracks of concrete pavement markedly, and improve the mechanical properties of concrete pavement slightly. The study provides recommendations for cracking control of airport concrete pavement in the future.     

Spatio-temporal dynamics in the phenology of croplands across the Indo-Gangetic Plains

Spatio-temporal dynamics in land surface phenology parameters observed over croplands can inform on crop-climate interactions and, elucidate local to regional scale vulnerabilities either due to climate change or prevailing sub-optimal agricultural practices. Here, we observe spatio-temporal trends in land surface phenology parameters (cropping intensity, length of growing season and productivity) for kharif and rabi cropping seasons from satellite data across the Indo-Gangetic Plains from 1982 to 2006. The productivity of the Indo-Gangetic Plains croplands is of regional importance and is a vital component of Indian national food security efforts. Aside from local and intra-state heterogeneity in observed trends there was a clear west-to-east gradient in cropping intensity. Key observed trends include increasing cropping intensity in the eastern IGP, increasing number of growing days per year in Bihar, Uttar Pradesh and Haryana and increasing productivity in both cropping seasons across the IGP. This information is a crucial input to integrated assessments of the croplands to ensure management of the agricultural system shifts towards a trajectory of climate-resilience and environmental sustainability.     

Modeling and Simulation of Pipeline Security Monitoring System Based on Line-Structure Sagnac Interferometer with 3×3Coupler

The third damage action,human disruption behavior,is one of the major threats to pipeline operation.It is necessary to monitor and locate the perturbation behavior that may threat pipeline safety in real-time.Therefore,a new pipeline security monitoring system is designed by using line-structure Sagnac optic fiber interferemeter with the characteristic of 3×3coupler that can modulate the phase of optic signal,with no need for phase modulation and demodulation.The optic structure of the new system is simplified,the signal processing accuracy is improved,and the polarization effect is reduced.The working principle of the monitoring in ideal condition is described,the phase demodulation is analyzed and the location of the possible damage action point is formulated.By using simulink,the optic signal propagation and interference is simulated and interference signals in different frequencies are obtained.The results validate the feasibility of the monitoring system and indicate that the low frequency signal less than 1kHz resulting from the human damage action can be detected.The disturbance set at 10 km can be located by calculating the demodulation signal accurately over a long monitoring distance.