廊坊市新农村建设中的生态环境存在的问题及对策

和全国其他地方一样,廊坊市在大力推进社会主义新农村建设的过程中,也面临着农村生态环境恶化的困境。为了实现农业生产发展和农村生态环境保护之间的平衡,政府应当加大公共财政支出向农村地区倾斜的力度,坚持规划先行、服务跟进的原则,切实改善人居环境,强化农村生态环境保护法制的实施,把新农村建设成为生态良好的新农村。     

野战环境下大型飞机超低空气动特性分析

针对野战环境下的大型飞机超低空飞行,采用CFD方法对地面存在前向或横向不对称障碍物时地面效应对气动参数的影响进行了数值分析,包括纵向稳定性和侧向摇晃等问题.研究结果表明,野战等非常规飞行条件下,地面不确定障碍物会造成大型飞机稳定性变差,严重时可能出现纵向点头和横侧向摇晃现象,容易导致触地危险.最后,从现代飞行控制理论角度提出了对常规布局大型飞机进行闭环控制的研究思路.     

电子辐照对聚乙烯热缩套管力学性能的影响

利用45 keV,1 MeV和2 MeV电子分别对聚乙烯热缩套管进行辐照实验,研究不同能量电子辐照对聚乙烯热缩套管力学性能的影响,并分析电子辐照下材料的损伤效应机理,建立力学性能退化规律。结果表明：实验选定的3种能量电子辐照都会造成聚乙烯的降解,材料脆化产生裂纹,从而导致其力学性能下降;但是由于这3种能量电子穿透深度不同,45 keV电子只能造成聚乙烯热缩套管表层材料损伤,力学性能最大下降量只有30%~40%,而1 MeV和2 MeV电子却会导致套管力学性能完全丧失,力学性能下降接近100%。     

导流槽构型对火箭起飞时流场和声场的影响

为了研究四喷管运载火箭起飞时火箭周围噪声环境问题,建立燃气/空气双组分的可压缩流动模型,采用2阶Roe格式、SAS(scale-adaptive simulation)湍流模型和声学类比积分法Ffowcs-Williams Hawkings(FW-H)求解三维Navier-Stokes方程。以单机火箭的噪声问题为对象开展数值模拟,并将噪声数值计算结果与试验数据对比,误差在3dB以内(相对误差小于1.6%),验证预测噪声方法的有效性,进而研究四喷管运载火箭起飞阶段采用不同导流槽构型对箭体舱段区域噪声环境的影响,结果表明:在相同噪声接收点处,单侧导流槽对应的总声压级比双侧导流槽大,两者的总声压级(OASPL)之差最大为10.7dB。另外,当采用单侧导流槽时,沿周向接收点的噪声总声压相对单侧导流槽中心截面呈对称分布,而且沿导流出口方向逐渐增大。所建立的噪声数值方法为大推力捆绑运载火箭舱段的噪声环境预测及其控制提供一定参考。     

电火工品电磁建模及仿真分析

以常规结构电火工品为研究对象,在分析电磁环境对火工品作用机理的基础上,采用ANSYS HFSS电磁仿真软件建立火工品电磁模型,按照GJB 786-89《预防电磁场对军械危害的一般要求》加载典型电磁能量,从感应射频电流和损耗功率2个层面,分别研究电磁环境对电火工品的安全性影响,并给出仿真结果。     

The hydroxyl radical as an indicator of SEP fluxes in the high-latitude terrestrial atmosphere

The low background values at nighttime of the mesospheric hydroxyl (OH) radical make it easier to single out the atmospheric response to the external solar forcing in Polar Regions. Because of the short lifetime of HO_x, it is possible to follow the trails of Solar Energetic Particle (SEP) events in the terrestrial atmosphere, as shown by Storini and Damiani (2008). The sensitivity of this indicator makes discernible not only extreme particle events with a flux peak of several thousand pfu [1 pfu = 1 particle/(cm² s sr)] at energies >10 MeV, but also those with lower flux up to about 300 pfu. Using data from the Microwave Limb Sounder (MLS) on board the EOS AURA satellite, we examined the correlation of OH abundance vs. solar proton flux for almost all the identified SEP events spanning from November 2004 to December 2006 (later on no more SEP events occurred during Solar Cycle no. 23). The channels at energies greater than 5 MeV and 10 MeV showed the best correlation values (r ∼ 0.90–0.95) at altitudes around 65–75 km whereas, as expected, the most energetic channels were most highly correlated at lower altitudes. Therefore, it is reasonably possible to estimate the solar proton flux from values of mesospheric OH (and viceversa) and it could be useful in studying periods with gaps in the records of solar particles.     

基于剪裁技术考虑的某冲击试验分析

利用环境工程剪裁技术对某冲击试验的结果进行分析,结果表明,按照引用标准评定为"超差"的试验,当考虑到试验件结构的特性并进行必要的数据转换后,试验结果是有效。首先分析造成超差的原因为天线组件的剩余响应,然后通过频域数字滤波进行数据转换。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.