地球扁率引起红外地平仪姿态量测误差的数学模型

本文讨论了地球扁率引起红外地平仪的姿态量测误差的数学模型，导出解析形式姿态误差计算公式，可在任意轨道根数和扫描轴安装角情况下用于误差补偿。算例表明，利用本文导出的解析公式与利用数值方法的计算结果完全一致。     

遥测数据重建弹道校正方法

弹道导弹遥测系统数据丢帧一般采用直接插值法进行校正,这对导弹运动速度和位置而言精度不高。文中在分析弹道导弹运动特性的基础上,提出视速度增量校正方法,仿真表明该方法的计算精度高于直接插值计算方法。在此基础上利用该方法对速度和位置数据进行了增密,得到了步长小、精度高的增密数据。     

二维测量系统的误差分析及其修正

二维测量系统的测量误差主要由两个导轨的五个自由度误差和测头误差组成。给出了误差的数学模型，论述了误差的测量、修正及误差修正的误差。     

红外地平仪姿态测量误差模型

分析得出地球扁率和红外辐射是扫描式红外地平仪测量误差的主要原因。针对地球扁率，基于方位角的确定，分别给出了滚动角和俯仰角的测量误差模型。在地球红外辐射方面，给出了确定地平仪扫人、扫出点位置的方法，进而给出地球红外辐射误差的计算方法。最后，通过算例，给出了有关仿真结果，对方法的有效性进行了验证。     

Ionosphere modelling for Galileo single frequency users: Illustration of the combination of the NeQuick model and GNSS data ingestion

The ionospheric effect remains one of the main factors limiting the accuracy of Global Navigation Satellite Systems (GNSS) including Galileo. For single frequency users, this contribution to the error budget will be mitigated by an algorithm based on the NeQuick global ionospheric model. This quick-run empirical model provides flexible solutions for combining ionospheric information obtained from various sources, from GNSS to ionosondes and topside sounders. Hence it constitutes an interesting simulation tool not only serving Galileo needs for mitigation of the ionospheric effect but also widening the use of new data.     

末端能量管理段迭代校正轨道算法研究

针对航天器进入末端能量管理段接口处时位置和航迹偏角存在大范围摄动的问题，提出一种使用迭代校正法的轨道快速生成算法。该算法可以根据航天器的具体初始状态，自动选择直接进场或者间接进场策略，快速生成可行的参考轨迹。首先通过跟踪轨迹地面投影实现侧向制导；根据末端能量管理段的起始点与终点的高度与速度约束生成参考动压-高度剖面，并跟踪此剖面实现纵向制导。然后采用迭代校正计算快速确定航向校准柱的位置与最终半径两个参数用以调整航程，保证航天器在末端的所有状态满足自动着陆段接口的边界约束。仿真结果校验了该算法可以根据航天器的具体状态快速生成符合约束条件的末端能量管理段飞行轨道，具有很好的鲁棒控制性能。     

Soil moisture mapping over the Chinese Loess Plateau using ENVISAT/ASAR data

In this paper, we used the available algorithm for soil moisture estimation over LOPEX05 (the Loess Plateau land surface process Experiment (2005)) area. The available algorithm used ENVISAT/ASAR AP mode VV polarization observational data at a low incidence angle and ground measured soil moistures. The ground measurements were performed in the summer of the 2005 during the LOPEX05 field campaign. The validated results indicate that an average difference between the soil moistures estimated from the microwave remote sensing and ground measurements is less than 0.02 cm³/cm³, with a RMS error of 2.0%, and a maximum less than 0.04 cm³/cm³. The algorithm was applied to the surface soil moisture mapping later. The results show that this algorithm is suitable for monitoring soil moisture information of the agricultural fields over the Chinese Loess Plateau, when ground land cover situation and the resolution of imagery data are taken into account. However, we also find that there are large differences over the steep slope region, the edge of mesa. The results are not acceptable for surface soil moisture estimation in these regions. Thus, the surface soil moisture retrieval in the steep slope region of the Loess Plateau need to be further investigated in the future.     

Solidworks2008标题栏的设计与填写

本文介绍了在Solid Works2008下工程图标题栏设计、项目修改、填写有关内容。使标题栏的内容符合本单位规定的内容、格式，并可实现由系统自动填写，对于工程设计非常实用。     

Deriving remote sensing reflectance from turbid Case II waters using green-shortwave infrared bands based model

The objectives of this study are to validate the applicability of a shortwave infrared atmospheric correction model (SWIR-based model) in deriving remote sensing reflectance in turbid Case II waters, and to improve that model using a proposed green-shortwave infrared model (GSWIR-based model). In a GSWIR-based model, the aerosol type is determined by a SWIR-based model and the reflectance due to aerosol scattering is calculated using spectral slope technology. In this study, field measurements collected from three independent cruises from two different Case II waters were used to compare models. The results indicate that both SWIR- and GSWIR-based models can be used to derive the remote sensing reflectance at visible wavelengths in turbid Case II waters, but GSWIR-based models are superior to SWIR-based models. Using the GSWIR-based model decreases uncertainty in remote sensing reflectance retrievals in turbid Case II waters by 2.6–12.1%. In addition, GSWIR-based model’s sensitivity to user-supplied parameters was determined using the numerical method, which indicated that the GSWIR-based model is more sensitive to the uncertainty of spectral slope technology than to that of aerosol type retrieval methodology. Due to much lower noise tolerance of GSWIR-based model in the blue and near-infrared regions, the GSWIR-based model performs poorly in determining remote sensing reflectance at these wavelengths, which is consistent with the GSWIR-based model’s accuracy evaluation results.     

星光折射连续修正方法及制导规划

针对星光折射模型本身固有的缺点，对星光折射连续修正方法进行了研究，该方法首先探索折射星的分布规律，而后采用Unscented卡尔曼滤波算法+多星连续观测的方案实现定位。同时，对可用星与选星要素和基于突防规划的星光制导弹道设计两方面进行了研究，在星光制导制约机理研究的基础上，提出了惯性/星光制导规划方法，该方法包括导航星的优选策略、导航星优选技术和星点位置的精确计算3步。最后，介绍了星光制导系统的系统组成和功能原理。