防空雷达精确预警关键技术研究

精确化防空是未来防空作战的发展趋势,而精确预警是精确防空作战的前提和基础。针对防空雷达精确预警存在的不足,研究了基于“北斗一号”卫星定位系统的精确标定和时间校准的方法,探讨了提高防空雷达预警探测精度的方法,在空间校准、时间统一的基础上研究了雷达组网的数据融合问题。     

基于螺旋理论描述的空间相对运动姿轨同步控制

对于姿轨运动存在严重耦合的空间相对接近操作,必须解决相对运动的姿轨同步控制问题。传统的相对姿轨分开建模串行控制方法,忽略了姿轨耦合,控制周期长且姿轨同步性差,显然不能满足要求。基于螺旋理论中的对偶数描述,建立了航天器六自由度相对运动模型,不仅包含了姿轨耦合项,而且形式统一有利于同步控制律的设计。针对模型中的耦合项进行分析,给出了相对姿轨耦合产生的成因。建立了相对姿轨同步误差,考虑模型的非线性,基于非线性反馈设计了一种同步控制律以消除该误差,并利用Lyapunov理论证明了控制律的稳定性。以两航天器交会接近的最后逼近段进行数字仿真,并与PD控制相对比,验证了所提方法的有效性,同时验证了所提方法可以实现姿轨控制的同步收敛,对于空间相对运动的姿轨同步操作具有重要意义。     

Quality variation of GPS satellite clocks on-orbit using IGS clock products

Over 60% clocks on board of the GPS satellites are working longer than their designed life. Therefore realizing their stabilities in a long time scales is essential to GPS navigation and positioning plus IGS time scale maintaining. IGS clock products from 2001 to 2010 are used to analyze the GPS satellite clock qualities such as frequency stabilities and clock noise level. We find out that for the clocks of Block IIA satellites the frequency stabilities and clock noise are 10 times worse than that of the Block IIR and IIR-M satellites. Moreover, the linear relationships between frequency stabilities and clock residuals have been deduced with an accuracy of better than 0.02 ns. Specially, it is noticed that the clock of the PRN27 is instable and the relationship between the frequency stability and residuals is at least a quadratic curve. Therefore, we suggested that GPS satellite clocks should be weighted by their quality levels in application, and the observations of the Block IIA should not be used for real-time positioning which required precision better than one meter.     

卫星编队飞行输出反馈姿态协同跟踪控制

针对卫星编队飞行姿态协同跟踪的控制过程中角速度信息不可测及外界常值干扰的问题,提出输出反馈协同控制器的设计方法。首先,利用绝对及相对姿态误差信息设计含有积分项的滤波器,并在控制器中引入滤波器的输出信息;同时,考虑到卫星的模型不确定性,设计自适应估计器以对卫星的转动惯量进行在线估计。此外,论证了当卫星编队的通信拓扑结构满足无向树形结构的条件时,仅对任意一颗卫星期望姿态可知即可使整个系统协同收敛于期望值。设计的控制器无需卫星角速度信息即可使角速度信息协同达到期望值,并且引入积分项使得闭环控制系统对常值干扰有良好抑制效果,同时给出降低系统的信息通信压力的分析。最后将提出的算法应用于无需角速度信息反馈的卫星编队飞行的协同控制,仿真结果表明该方法的可行性与有效性,具有实际的应用前景。     

载人航天空空通信子系统及其关键技术

介绍了实现神舟运输飞船与天宫目标飞行器间数据通信和传输的空空通信子系统的构成,以及空空通信机的功能及其主要性能指标。空空通信子系统采用抗干扰能力强、保密性优的直接序列扩频通信技术。分析了其中的核心中频解扩解调中的伪码同步和载波同步等关键技术,应用数字解调方案降低了子系统调试难度,提高了可靠性。     

Compact frequency standard using atoms trapped on a chip

We present a compact atomic frequency standard based on the interrogation of magnetically trapped ⁸⁷Rb atoms. Two photons, in the microwave and radiofrequency domain excite the atomic transition. At a magnetic field of 3.23 G this transition from ∣F = 1, m_F = −1〉 to ∣F = 2, m_F = 1〉 is 1st order insensitive to magnetic field variations. Long Ramsey interrogation times can thus be achieved, leading to a projected stability in the low 10⁻¹³ at 1 s. This makes this device a viable alternative to LITE and HORACE as a good candidate for replacing or complementing the rubidium frequency standards and passive hydrogen masers already on board of the GPS, GLONASS, and GALILEO satellites. Here we present preliminary results. We use an atom chip to cool and trap the atoms. A coplanar waveguide is integrated to the chip to carry the Ramsey interrogation signal, making the physics package potentially as small as (5 cm)³. We describe the experimental apparatus and show preliminary Ramsey fringes of 1.25 Hz linewidth. We also show a preliminary frequency stability σ_y = 1.5 × 10⁻¹²τ^−1/2 for 10 < τ < 10³ s. This represents one order of magnitude improvement with respect to previous experiments.     

介质振荡器的设计

为了实现微型化相干布局囚禁（CPT）原子钟,需要设计出小体积、低功耗的微波电路。本文介绍了利用介质振荡器（DRO）实现的适合微型CPT原子钟的微波电路,首先利用ADS（Advanced Design System）软件实现了介质振荡器的仿真,然后根据仿真结果设计并实现了振荡器电路,测试结果表明：输出微波频率为3.4GHz、功率为-4dBm、功耗为37mW。     

The effect of neglecting VLBI reference station clock offsets on UT1 estimates

Very Long Baseline Interferometry (VLBI) allows to monitor universal time (UT1) by conducting regular international experiments. Such dedicated observation networks are equipped with different hardware components, which require different processing strategies when the data are correlated. As the timing units at each stations are usually offset with respect to universal time (UTC) this effect should be considered during correlation processing. Thus, it is investigated how neglecting of these offsets theoretically impacts the estimation of UT1. Three different strategies for the proper handling of the timing offset will be discussed and their advantages/drawbacks will be pointed out. Moreover, it is studied how neglecting of these timing offsets affects UT1 time-series and how such a missing correction can be applied a posteriori. Although the discussed effect is for most of the UT1 experiments smaller than the formal error of the estimates, it is important to consider station clock offsets properly in next-generation VLBI systems, which are expected to improve accuracy of results by about one order of magnitude.     

远程测发控系统在无人值守期间对部分故障的远程定位

首先要建立模拟量与数字量被合理分配、灵活应用的测控体制,然后再 开始解决一些目前无法进行远程处理的问题;选择一款有助于实现总体方案的 高可靠性数模设备也是设计之初重点考虑的问题。     

基于模型预测的多电机弱磁同步控制策略研究

从工业场合下多电机系统高速运行的实际需求出发,分析了传统多电机控制系统和传统弱磁控制系统的优缺点,针对多电机高速运行时的弱磁特性进行了研究。模型预测控制(MPC)是一种基于被控对象模型的新型控制算法,具有较强的鲁棒性和较好的控制性能。交叉耦合控制是一种在并行控制基础上对每个电机进行相应补偿的控制系统。将MPC应用到多电机控制系统中并对其进行改进使其具有弱磁控制能力；对传统的交叉耦合控制策略进行改进。将二者结合提出了一种基于模型预测的多电机弱磁同步控制策略,并以双电机系统为例。最后,进行了仿真验证,仿真试验结果表明,基于模型预测的多电机弱磁同步控制策略,可获得比传统双电机系统更好的跟随性能和同步性能。