亚/超声速楔状流层流边界层速度与温度相似解及拟合解

利用相似变换获得了楔状流层流边界层无量纲流函数的3阶非线性常微分方程,用Runge-Kutta法求解微分方程获得了不同楔形角楔状流层流边界层无量纲速度随相似变量的变化曲线;推导了亚声速和超声速楔状流层流边界层无量纲温度关于相似变量的2阶线性齐次和非齐次微分方程,获得了温度分布的通解,恒壁温条件下亚声速楔状流和绝热壁面条件下超声速楔状流层流边界层无量纲温度解析解及指数函数形式的拟合解.以楔形角为0为例利用相似变换研究了超声速条件下气体压缩性及黏度随温度变化等因素对层流边界层速度与温度的影响,得出不可压缩常物性与可压缩变物性条件下无量纲速度相对误差绝对值小于9.8%的结论.研究表明:Pr越大贴近壁面处无量纲温度变化越剧烈;超声速条件下壁温低于绝热壁温时黏性耗散作用可以使层流边界层气体温度从壁面到主流间出现先升高后降低的变化.      

运输机超低空空投重物动力学分析与Ｈ∞鲁棒控制设计

运输机超低空空投重型货物是一个对控制精度要求较高的复杂技术过程。本文针对飞机-货物间约束力的理想特性,采用拉格朗日分析力学的第二类方程,建立了机-货两体系统的耦合动力学方程,比起牛顿矢量力学方法,受力分析和建模过程简洁方便。在定义飞机及货物状态变量的基础上,将上述方程组转化为状态空间描述。为了有效抵抗货物移动对运输机姿态的影响,基于现代鲁棒控制理论,设计了状态反馈H∞最优控制律。最后,对空投过程进行了无控和闭环控制两种条件下的数值仿真对比。结果显示,本文设计的H∞最优控制能有效抑制货物移动对运输机姿态的影响,改善了飞行品质,且控制量在工程允许的范围内,该控制律是有效的。     

基于闭环解析解的可重复使用运载器轨迹在线生成方法

The relationships between path constraints such as heating rate, dynamic pressure and aerodynamic load and velocity during entry flight are analyzed in  r-V  plane for an entry vehicle with mediate high lift to drag ratio. Through derivation and integration, a unified formula for path constraints is obtained in  r-V  plane. Based on the unified formula and several characteristics an analytical solution is obtained,and an online trajectory generation method is developed. In the method, the coupled longitudinal and lateral motion is considered, and can make the best use of flight capability and satisfy path constraints. Trajectory generation cases with different flight mission and downranges are tested. Simulation results demonstrate the capability and efficiency of the trajectory planning method in dealing with path constraints.     

基于速度增量的空间绳系机器人中距离逼近过程最优轨迹规划

针对空间绳系机器人中距离逼近过程最优轨迹规划问题,提出了基于速度增量的多目标逼近轨迹优化方法,优化指标为总速度增量及逼近时间。首先建立逼近过程相对动力学模型及最优逼近轨迹优化模型,然后利用改进型非劣分类遗传算法得到相对逼近距离1.5 km内逼近轨迹的Pareto最优解。仿真结果表明,该方法可以揭示空间绳系机器人逼近距离1.5 km内逼近时间、燃料消耗、相对目标的面内视界角及速度增量次数之间的相互关系,能满足针对不同任务需求提供相应最优轨迹的要求。     

三阶幻方问题的代数解法

介绍了中国古代数学家甄鸾和杨辉关于三阶幻方的一个构造方法。用线性代数的方法构造三阶幻方约束方程组时,当自由未知量分别取1,2,3,…,9时,对应的方程组共有56组整数解,为了找出幻方的全部解,需要确定自由未知量取值的限制条件,由此对方程组中的自由未知量的取值进行了分类探讨,进而求出三阶幻方的全部解。利用线性代数的方法去探求三阶幻方的解法种数显然不是最简捷的,但却有完备的理论做保证。此外,提供了一个如何利用线性代数知识来解决实际问题的实例,并简介了三阶幻方所具有的奇妙的特性。     

Onboard orbit determination using GPS observations based on the unscented Kalman filter

Spaceborne GPS receivers are used for real-time navigation by most low Earth orbit (LEO) satellites. In general, the position and velocity accuracy of GPS navigation solutions without a dynamic filter are 25 m (1σ) and 0.5 m/s (1σ), respectively. However, GPS navigation solutions, which consist of position, velocity, and GPS receiver clock bias, have many abnormal excursions from the normal error range for space operation. These excursions lessen the accuracy of attitude control and onboard time synchronization. In this research, a new onboard orbit determination algorithm designed with the unscented Kalman filter (UKF) was developed to improve the performance. Because the UKF is able to obtain the posterior mean and covariance accurately by using the second-order Taylor series expansion through the sampled sigma points that are propagated by using the true nonlinear system, its performance can be better than that of the extended Kalman filter (EKF), which uses the linearized state transition matrix to predict the covariance. The dynamic models for orbit propagation applied perturbations due to the 40 × 40 geo-potential, the gravity of the Sun and Moon, solar radiation pressure, and atmospheric drag. The 7(8)th-order Runge–Kutta numerical integration was applied for orbit propagation. Two types of observations, navigation solutions and C/A code pseudorange, can be used at the user’s discretion. The performances of the onboard orbit determination were verified using real GPS data of the CHAMP and KOMPSAT-2 satellites. The results of the orbit determination were compared with the precision orbit ephemeris (POE) of the CHAMP and KOMPSAT-2 satellites.     

Fast Online Approximation for Hard Support Vector Regression and Its Application to Analytical Redundancy for Aeroengines

The hard support vector regression attracts little attention owing to the overfitting phenomenon. Recently, a fast offline method has been proposed to approximately train the hard support vector regression with the generation performance comparable to the soft support vector regression. Based on this achievement, this article advances a fast online approximation called the hard support vector regression (FOAHSVR for short). By adopting the greedy stagewise and iterative strategies, it is capable of online estimating parameters of complicated systems. In order to verify the effectiveness of the FOAHSVR, an FOAHSVR-based analytical redundancy for aeroengines is developed. Experiments on the sensor failure and drift evidence the viability and feasibility of the analytical redundancy for aeroengines together with its base-FOAHSVR. In addition, the FOAHSVR is anticipated to find applications in other scientific-technical fields.     

引入材料参数的弯管中性层偏移解析模型

中性层偏移是表征管材弯曲内外侧不均匀变形程度的关键参数。基于弯管截面力矩平衡条件,建立了引入材料参数的管材弯曲变形中性层偏移解析模型,针对管材数控绕弯和压弯过程对所建模型从多个方面进行了评估,研究了不同几何和材料等管材本征参数下的管材弯曲中性层偏移规律。结果表明:应用于TA18钛管数控绕弯,发现所建解析模型与已有解析方法预测精度相当,但能考虑材料参数影响,且相较于有限元模拟,本文解析模型更接近实验结果;应用于A6063铝合金管和AZ31镁合金管压弯过程,并与Hasegawa解析方法相较,发现本文解析模型能够准确预测拉压不对称对压弯中性层偏移的影响;弯曲半径减小,弯管直径增大,中性层向弯曲内侧移动;拉压屈服强度比减小,厚向异性指数增大,中性层向弯曲内侧移动。     

火星着陆探测任务关键环节技术途径分析

火星进入、下降与着陆技术(entry,descent and landing,EDL)是火星着陆探测最为关键的环节。火星与地球再入返回过程相比,由于火星大气成分、物理性质与地球大气存在较大差别,且具有较大不确定性,使火星EDL过程历经时间短、状态变化快,对减速性能要求高,时序紧张。从工程实现角度分阶段开展了任务分析,识别了火星EDL环节面临的问题和挑战,提出了关键环节技术途径选择。     

信号采集卫星系统星地资源快速调度优化方法

针对信号采集卫星系统中,采集目标的优先级和携带的信息量在星地资源调度过程中不断随时间变化的特点,提出了一种基于二次映射编码的动态调度差分演化算法（QMDSDE）。算法将采集目标的优先级和携带的信息量进行加权,作为采集的收益。在迭代求解时,根据卫星可见时间窗口的周期性特点设置固定的检测频率,以当前时刻所有目标收益的平均值和敏感系数的乘积作为检测环境变化的阈值。当检测算子的值大于阈值时,算法通过前向预测模型动态调整搜索方向,寻找问题的实时Pareto最优解。算法采用二次映射编码消除星地资源组合中的无效解,降低了算法的搜索空间,提高了算法的求解速度。经仿真校验,该方法在信号采集过程中,可以得到收益较好的星地资源调度方案,且具备较快的收敛速度。