静止轨道卫星通信链路的预算与分析

星地链路计算作为卫星通信的重要技术，是卫星通信系统设计的基础和理论依据，直接决定了卫星通信系统的链路通信质量。由于影响卫星链路的因素很多，设计中存在一处不合理即使得整条星地链路不可用，造成巨大的损失。而且在实际设计中无法做到最理想的链路状态，往往需要在某方面有所取舍，这也是链路计算中的一大难点。基于目前国际通用的链路计算方法，将星地链路上下行拆分，独立计算，综合分析，再结合实际工程经验，分析和计算实际工程案例，针对不同的链路配置给出相应合理的设计方法，可作为静止轨道通信卫星星地链路计算分析的参考。     

基于STAMP/STPA的机轮刹车系统安全性分析

把机轮刹车系统在飞机降落过程中的安全性问题当作系统控制问题,不采用基于故障概率模型的事故模型,而是采用基于系统理论的事故模型和过程(STAMP),构建机轮刹车系统在飞机降落过程中的STAMP控制关联模型和系统理论过程分析(STPA)反馈控制回路。根据系统运行的上下文信息识别机轮刹车系统在飞机降落过程中的不安全控制行为,分析产生不安全控制行为的关键原因。对机轮刹车系统在飞机降落过程中的不安全控制行为进行仿真研究,结果表明了STAMP/STPA的有效性和用仿真方法分析安全性问题的可行性。     

DME脉冲调制信号波形参数对空间频谱占用的影响分析

航空测距器DME的开发、调试和性能验证都要用到高斯双脉冲调制格式的DME信号。由于专用的DME信号模拟器技术复杂、价格昂贵,人们常用具有快沿双脉冲调制功能的模拟信号源替代。本文以航空测距器DME信号要求为依据,初步分析了这种替代可能存在的问题,并通过实验对不同边沿条件下高斯双脉冲、矩形双脉冲调制信号的功率频谱占用情况进行了验证。     

Contamination of short GRBs by giant magnetar flares: Significance of downward revision in distance to SGR 1806–20

We highlight how the downward revision in the distance to the star cluster associated with SGR 1806–20 by Bibby et al. (2008) reconciles the apparent low contamination of BATSE short GRBs by intense flares from extragalactic magnetars without recourse to modifying the frequency of one such flare per 30 years per Milky Way galaxy. We also discuss the variety in progenitor initial masses of magnetars based upon cluster ages, ranging from ∼50 M_⊙ for SGR 1806–20 and AXP CXOU J164710.2–455216 in Westerlund 1 to ∼17 M_⊙ for SGR 1900+14 according to Davies et al. (2009) and presumably also 1E 1841–045 if it originated from one of the massive RSG clusters #2 or #3.     

面向客机总体设计的涡扇发动机分析模型

建立一种用于估算涡扇发动机特性的工程分析模型，该模型以涡喷发动机推力估算模型与涡扇发动机效率分析方法为基础，引入高涵道比涡扇发动机的循环分析方法进行修正。利用该模型可以获取涡扇发动机的推力和油耗特性，进而考察总体循环参数对发动机性能的影响。通过与文献验证数据对比，判定了分析模型的精度。该模型只需要输入少量参数就可以快速完成计算过程，适合于飞机总体设计阶段，可以评估涡扇发动机参数对飞机性能的影响。     

基于变论域模糊控制的无刷直流电机转速问题

无刷直流电机(BLDCM)是一种多变量、强耦合、非线性、时变的复杂控制系统。由于其采用传统的PID控制时很难满足需要,所以针对BLDCM精确调速的控制问题,在基于传统PID控制上引入模糊控制设计了模糊PID控制,并在此基础上应用变论域的方法,设计了变论域模糊PID控制器。以BLDCM为模型,通过MATLAB建立其仿真模型。仿真和试验结果表明,采用变论域模糊PID控制的BLDCM与传统控制的BLDCM相比,具有响应速度快、超调小、控制精度高等优点。     

Automatic differentiation based discrete adjoint method for aerodynamic design optimization on unstructured meshes

A systematic methodology for formulating, implementing, solving and verifying discrete adjoint of the compressible Reynolds-averaged Navier-Stokes (RANS) equations for aerodynamic design optimization on unstructured meshes is proposed. First, a general adjoint formulation is con-structed for the entire optimization problem, including parameterization, mesh deformation, flow solution and computation of the objective function, which is followed by detailed formulations of matrix-vector products arising in the adjoint model. According to this formulation, procedural components of implementing the required matrix-vector products are generated by means of auto-matic differentiation (AD) in a structured and modular manner. Furthermore, a duality-preserving iterative algorithm is employed to solve flow adjoint equations arising in the adjoint model, ensur-ing identical convergence rates for the tangent and the adjoint models. A three-step strategy is adopted to verify the adjoint computation. The proposed method has several remarkable features:the use of AD techniques avoids tedious and error-prone manual derivation and programming;duality is strictly preserved so that consistent and highly accurate discrete sensitivities can be obtained; and comparable efficiency to hand-coded implementation can be achieved. Upon the cur-rent discrete adjoint method, a gradient-based optimization framework has been developed and applied to a drag reduction problem.     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

控制系统延迟对轴扭振的影响

控制系统中的轴扭振会引起系统控制量的振荡,加大机械传动装置磨损,甚至会导致传动轴断裂。在工业应用中,多采用陷波滤波器抑制轴扭振,而陷波频率的选取通常未考虑控制系统延迟因素。基于电机角速度增量、轴转矩增量和电机电磁转矩增量的相位图,分析了控制系统延迟对轴扭振频率的影响。仿真结果对分析结论给予了验证。     

船载天线伺服系统稳定回路分析与设计

为提高方位俯仰型船载天线伺服系统的船摇隔离度,稳定环是常采用的策略,但是选择传统的PID(Proportional Integral Derivative,比例积分微分)调节器往往不能获得满意的控制效果,针对该问题,提出了PID+积分+滞后校正环节作为稳定环调节器的具体实现形式。另外,通过对伺服系统内各环路带宽及响应速度的分析,将稳定环阶跃响应的上升时间作为参数调节依据。上述设计完成后,在实际系统中添加周期10s,幅值8°的正弦波信号模拟船摇扰动,此时添加稳定环后,方位轴的船摇隔离度提高了6dB,俯仰轴的船摇隔离度提高了13dB。这表明,采用PID+积分+滞后校正环节作为稳定环调节器的设计形式是正确且简单有效的。