改进BA优化的MKSVDD航空发动机工作状态识别

为了提高航空发动机工作状态识别准确率和效率,避免人工识别中存在的误判和耗时耗力问题,提出了基于混沌脉冲蝙蝠算法（CRBA）优化的多核支持向量数据描述（CRBA-MKSVDD）智能识别方法。研究了多核支持向量数据描述（MKSVDD）改进策略,引入混沌脉冲发射率提高了蝙蝠算法（BA）的收敛速度和收敛精度,得到了CRBA;通过CRBA优化MKSVDD的惩罚因子和核参数,同时对飞参数据进行了特征提取;基于特征飞参数据训练了CRBA-MKSVDD分类器,并对某型发动机一个飞行架次的工作状态进行了识别。结果表明,该方法识别准确率达到97.547 9%,可用于与发动机工作状态的相关研究和应用。      

ROPP反演软件算法及其精度分析

介绍了ROPP反演软件中无线电掩星反演的算法与精度分析. 采用COSMIC卫星2008年1 月1日全天的附加相位数据, 反演得到折射率、温度、压强与湿度等参数, 并与CDAAC 相应结果进行对比. 实验结果表明, 在30km高度以下, 折射率、压强和湿度的相对 误差在2%以内, 温度误差不超过2K.      

多视场星敏感器结构参数标定方法

提出一种基于星间角距不变原理的多视场(FOV)星敏感器结构参数标定方法.这种方法以欧拉角表征多视场星敏感器各个子视场之间的旋转关系,利用识别得到的各个视场星点的坐标信息和赤经赤纬信息,计算出多对星光矢量来建立标定模型和目标函数,然后使用L-M算法优化目标函数并解算出各个子视场之间的结构参数.此方法不需要外部姿态测量仪器辅助,可用于在轨和地面标定.在全天球随机抽取多个姿态生成多视场的仿真星图用于标定,并采用星内角统计偏差作为结构参数标定精度的评价指标.这种方法能够准确求解多视场星敏感器的结构参数.星内角统计偏差的平均值在星点位置噪声标准差为0.1像素的仿真试验中为1.3",在外场观星的实际试验中为6.4".      

The effective temperatures of O-type stars from UV spectroscopy

We present an analysis of high resolution spectra in the far-UV – UV range (∼905–2000 Å) with non-LTE, spherical, hydrodynamical, line-blanketed models, of three O-type Galactic stars, and derive their photospheric and wind parameters. These data extend previously analyzed samples and fill a gap in spectral type coverage. The combined sample confirms a revised (downward) T_eff scale with respect to canonical calibrations, as found in our previous works from UV and optical spectra, and in recent works by other authors.     

Quasars and their emission lines as cosmological probes

Quasars are the most luminous sources in the Universe. They are currently observed out to redshift z≈7$z\approx 7$ when the Universe was less than one tenth of its present age. Since their discovery 50 years ago astronomers have dreamed of using them as standard candles. Unfortunately quasars cover a very large range (8 dex) of luminosity making them far from standard. We briefly review several methods that can potentially exploit quasars properties and allow us to obtain useful constraints on principal cosmological parameters. Using our 4D Eigenvector 1 formalism we have found a way to effectively isolate quasars radiating near the Eddington limit. If the Eddington ratio is known, under several assumptions it is possible to derive distance independent luminosities. We discuss the main statistical and systematic errors involved, and whether these “standard Eddington candles” can be actually used to constrain cosmological models.     

Stability of the seasonal variations in diurnal and semidiurnal components of mid-latitude F2 layer parameters

We report work utilizing 15-min resolution ionospheric data obtained with DPS-4 digisonde in 2003–2011 to study the seasonal variations in amplitudes and phases of the most powerful spectral components of the F2 layer critical frequency (foF2) and peak height (hmF2) fluctuations over Irkutsk (52.5°N, 104.0°E). We show that fluctuations of both parameters contain quasi-harmonic components with periods of T_n = 24/n h (n = 1–7). The number of distinct spectral peaks varies from 3 in summer to 7 in winter. Amplitude and phase characteristics of the diurnal (n = 1) and semidiurnal (n = 2) components is studied using the data sets extracted from the original data sets with band-pass filter. It has been found that the amplitudes of diurnal/semidiurnal foF2 and diurnal hmF2 components are maximum in winter and minimum in summer. Amplitudes of the diurnal components vary gradually; those of the foF2 semidiurnal one, abruptly, thus forming a narrow winter maximum in November–January. The phase (local time of maximum) of the diurnal foF2 component increases gradually by 4–6 h from winter to summer. The phase of the semidiurnal foF2 component is nearly stable in winter/summer and sharply decreases (increases) by 2–3 h near the spring (autumn) equinox. The phase of the diurnal component of hmF2 (local time of minimum) varies slightly between 1130 and 1300 LT; that of the semidiurnal one decreases (increases) by 4–6 h from January to March (from September to November). The results obtained show that the main features of seasonal variations in the diurnal and semidiurnal components of the mid-latitude F2 layer parameters recur consistently during the solar activity growth and decline phases.     

某型航空发动机参数变化的原因分析

利用飞参记录有关发动机性能参数的数据,运用推进系统理论知识,进行原因查找分析与调整研究,保持、恢复发动机性能。     

对某型航空发动机参数的调整分析

分析某型发动机部件对有关性能参数的影响和调整机理,针对因部件效率下降较多引起的性能参数不能同时符合技术要求的问题进行分析,提出适当减小喷管喉部截面面积最小液压限制值来进行调节,使之符合技术要求。     

基于无奇异变换的卫星广播星历拟合算法

针对导航卫星轨道偏心率近似为0,致使卫星轨道的近地点角距定义模糊,在数据拟合过程中会导致法矩阵（H^TH）奇异的问题,本文提出基于无奇异变换的广播星历参数拟合算法,引入无奇异轨道根数代替经典开普勒根数,推导了空间目标位置矢量对基于无奇异轨道根数的广播星历参数偏导数矩阵,利用变换后的观测方程迭代拟合得到改进广播星历参数,再将结果归一化到基于开普勒根数的广播星历参数。最后利用仿真算例验证了所推公式和算法的合理性。     

被动型星载氢钟H型气体电离模型及参数优化

针对被动型星载氢钟气体电离装置低功耗、低电磁干扰的设计要求,设计了一种基于平面盘绕馈能天线的H型电离系统,并建立该电离方法的数学模型。首先,由Maxwell方程出发,推导出了电离泡中的电场和磁场的分布模型,得到气体电离机制;再由电磁场的分布方程推导出氢气击穿判据表达式,建立了气体电离条件的数学模型;最后,利用电离击穿条件判据方程优化了电离装置的设计参数。数值仿真与测试表明该模型是有效的,采用优化的设计参数可以使电离功耗和电磁干扰特性得到改善,且电离直流电源总功率可小于2W。