磁粉探伤中的涡流效应

首先计算棒材通交流电磁化时其中的涡流及磁场分布，由微机绘制相应的分布曲线，最后讨论因涡流效应对磁化的影响并得出了一些有关结论。     

过山气流的一种工程模拟方法

给出了一种过山气流的流体力学工程化模型。它根据过山气流的流动特点，按照绕圆柱流动理论，计入地面摩擦影响，同时用叠加背风涡的方法，     

No significant level of inheritable interchromosomal aberrations in the progeny of bystander primary human fibroblasts after alpha particle irradiation

A major concern for bystander effects is the probability that normal healthy cells adjacent to the irradiated cells become genomically unstable and undergo further carcinogenesis after therapeutic irradiation or space mission where astronauts are exposed to low dose of heavy ions. Genomic instability is a hallmark of cancer cells. In the present study, two irradiation protocols were performed in order to ensure pure populations of bystander cells and the genomic instability in their progeny were investigated. After irradiation, chromosomal aberrations of cells were analyzed at designated time points using G₂ phase premature chromosome condensation (G₂-PCC) coupled with Giemsa staining and with multiplex fluorescent in situ hybridization (mFISH). Our Giemsa staining assay demonstrated that elevated yields of chromatid breaks were induced in the progeny of pure bystander primary fibroblasts up to 20 days after irradiation. mFISH assay showed no significant level of inheritable interchromosomal aberrations were induced in the progeny of the bystander cell groups, while the fractions of gross aberrations (chromatid breaks or chromosomal breaks) significantly increased in some bystander cell groups. These results suggest that genomic instability occurred in the progeny of the irradiation associated bystander normal fibroblasts exclude the inheritable interchromosomal aberration.     

Static aeroelastic analysis of very flexible wings based on non-planar vortex lattice method

A rapid and efficient method for static aeroelastic analysis of a flexible slender wing when considering the structural geometric nonlinearity has been developed in this paper. A non-planar vortex lattice method herein is used to compute the non-planar aerodynamics of flexible wings with large deformation. The finite element method is introduced for structural nonlinear statics analysis. The surface spline method is used for structure/aerodynamics coupling. The static aeroelastic characteristics of the wind tunnel model of a flexible wing are studied by the nonlinear method presented, and the nonlinear method is also evaluated by comparing the results with those obtained from two other methods and the wind tunnel test. The results indicate that the traditional linear method of static aeroelastic analysis is not applicable for cases with large deformation because it produces results that are not realistic. However, the nonlinear methodology, which involves combining the structure finite element method with the non-planar vortex lattice method, could be used to solve the aeroelastic deformation with considerable accuracy, which is in fair agreement with the test results. Moreover, the nonlinear finite element method could consider complex structures. The non-planar vortex lattice method has advantages in both the computational accuracy and efficiency. Consequently, the nonlinear method presented is suitable for the rapid and efficient analysis requirements of engineering practice. It could be used in the preliminary stage and also in the detailed stage of aircraft design.     

Influence of thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations

Vortex-acoustic coupling is one of the most important potential sources of combustion instability in solid rocket motors (SRMs). Based on the Von Karman Institute for Fluid Dynamics (VKI) experimental motor, the influence of the thermal inhibitor position and temperature on vortex-shedding-driven pressure oscillations is numerically studied via the large eddy simulation (LES) method. The simulation results demonstrate that vortex shedding is a periodic process and its accurate frequency can be numerically obtained. Acoustic modes could be easily excited by vortex shedding. The vortex shedding frequency and second acoustic frequency dominate the pressure oscillation characteristics in the chamber. Thermal inhibitor position and gas temperature have little effect on vortex shedding frequency, but have great impact on pressure oscillation amplitude. Pressure amplitude is much higher when the thermal inhibitor locates at the acoustic velocity anti-nodes. The farther the thermal inhibitor is to the nozzle head, the more vortex energy would be dissipated by the turbulence. Therefore, the vortex shedding amplitude at the second acoustic velocity antinode near 3/4L (L is chamber length) is larger than those of others. Besides, the natural acoustic frequencies increase with the gas temperature. As the vortex shedding frequency departs from the natural acoustic frequency, the vortex-acoustic feedback loop is decoupled. Consequently, both the vortex shedding and acoustic amplitudes decrease rapidly.     

涡脱位置及温度对涡声效应压力振荡影响

为探索涡-声效应对固体火箭发动机中压力振荡特性的影响,基于VKI (Von Karman Institute for Fluid Dynamics)发动机,通过改变挡板位置与燃气温度,对旋涡脱落引起的压力振荡进行了大涡模拟数值研究.耦合分析表明:挡板位于速度波腹附近,压力振荡最为严重;旋涡能量在输运过程中易于被湍流耗散,靠近喷管的二阶速度波腹处旋涡脱落压力振幅明显高于其它位置.解耦分析表明:温度对旋涡脱落频率影响不大,当旋涡脱落频率与声振频率分离后,压力振幅显著下降.     

一种采用径向串联方式的组合旋涡泵设计方法

给出了一种采用径向串联方式的两级组合旋涡泵设计方法.该方法首先使用经验系数法对旋涡泵的结构参数进行初步设计,然后采用Hex/Wedge网格单元划分Proe所建立的旋涡泵三维模型的网格;进而通过CFD数值模拟反复迭代优化得出旋涡泵的最终结构参数;最后对组合旋涡泵内流场进行了仿真分析并与试验数据进行了对比分析.对比分析表明在设计点仿真数据与试验数据的相对误差不超过2％,所设计的两级组合旋涡泵达到了预期性能指标.表明该设计方法是可行、有效的.     

先进旋涡燃烧室后钝体开口结构的数值研究

为了研究不同后钝体开口结构对先进旋涡燃烧室(AVC)流场的影响,分别对不同开口角度和开口尺寸的AVC流场进行了数值模拟。结果表明,后钝体开口比不开口有明显的优势,可通过选择合适的后钝体开口角度和开口尺寸来优化AVC,实现低压降的稳定燃烧。后钝体开口结构AVC可有效提高凹腔温度并使温度分布更加均匀。对于本文AVC结构的后钝体,半开口角度θ为50°,开口尺寸为2mm时,AVC综合性能最佳。     

高马赫数来流条件下斜激波与流向涡对相互作用

针对斜激波入射流向涡对形成的复杂流动干扰现象,在来流马赫数6条件下,利用后掠斜坡式涡流发生器生成流向涡对,采用数值模拟结合激波风洞实验,研究了斜激波与流向涡对相互作用引起的激波变形和旋涡演变。结果表明,斜激波与流向涡对相互作用的剧烈程度大致分为强、中、弱三种。在强相互作用下,激波面向上游凸起的程度最剧烈,呈现类“T”字型特征,其对称面处接近于一道正激波,波后出现回流区和局部流动滞止,使得流向涡对发生破碎;在中等相互作用下,对称面处存在局部正激波,但没有出现回流区;在弱相互作用下,不再出现局部正激波。进一步地分析发现,斜激波与流向涡对相互作用产生的流向涡对破碎现象,不符合经典的激波作用下单个流向涡破碎理论的预测。采用流向涡对对称面处的气流参数,对经典的流向涡破碎理论进行修正后,能够预测本文流向涡对在斜激波作用下是否发生破碎。本文为掌握激波作用下流向涡对破碎现象的规律,提供了重要参考。     

涡流发生器控制喷水推进器进水管流动分离的数值研究

为抑制某型喷水推进平入口进水管低进速比下管内流动分离,提升喷射泵来流的品质,应用涡流发生器（VG）流动控制技术,在进水管内部以及入口前的船底加装涡流发生器。采用雷诺时均模型和SST-kω湍流模型数值模拟进水管内流场,从流动分离、涡系分布和整体性能等方面分析了不同位置VG对进水管流场特性的影响,揭示了VG抑制进水管流动分离的控制机理。结果表明,VG产生流向涡驱动主流与斜坡侧边界层低能流体进行动量交换,增加边界层内的流向动量,从而抑制进水管斜坡侧的流动分离。流向涡在分离区内会发生方向偏移导致进水管内流场不对称。VG在进水管内产生的流向涡强度以及自身附加损失都会影响其控制效果。通过优选VG安装位置,进水管出口的不均匀度系数从0.406下降至0.318,旋流度从3.23°下降至2.14°,出口总压畸变减小,整体效率得到有效提升。