喷射成形过程雾化熔滴质量流率空间分布的研究

喷射成形是材料领域新出现的高新科学技术。本文研究了喷射成形雾化熔滴射流质量流率和沉积速率的分布规律，建立了它的空间分布函数。结果表明随着雾化压力的增加和沉积距离减小，雾化喷射流变得更集中。     

37mm冲压加速器热发射试验初步结果

气动中心超高速所自行研制成国内第一座冲压加速器，并成功地实现了弹丸的冲压加速。文中首先给出冲压加速器的工作原理、国内外研究现状，以及３７ｍ ｍ 口径冲压加速器系统组成，最后给出了热发射不起动（ｕｎｓｔａｒｔ）和热发射实现冲压加速的初步结果     

Blank Panel Design of Integral Wing Skin Panels Based on Feature Mapping Methods

A blank panel design algorithm based on feature mapping methods for integral wing skin panels with supercritical airfoil surface is presented.The model of a wing panel is decomposed into features,and features of the panel are decomposed into information of location,direction,dimension and Boolean types.Features are mapped into the plane through optimal surface development algorithm.The plane panel is modeled by rebuilding the mapped features.Blanks of shot-peen forming panels are designed to identify the effectiveness of the methods.     

2195铝锂合金应力松弛时效成形工艺制度

以2195-T8态铝锂合金为研究对象,探究工艺参数对其应力松弛时效行为的影响规律。试样经过固溶、淬火,进行不同预变形、时效温度及时效时间条件下的应力松弛时效实验。通过室温拉伸,测得应力松弛时效后试样的力学性能。基于正交试验的极差分析和方差分析,探究了预变形、时效温度和时效时间3个工艺参数对应力松弛量、屈服强度和延伸率的影响权重占比;进一步研究发现预变形不仅可以提高2195铝锂合金时效后的强度,还降低了应力梯度对材料力学性能不均匀性的影响;查明了实现2195铝锂合金应力松弛时效形性协同制造的合理工艺制度:180℃+4%预变形+时效时间12～16 h。研究工作为大型铝锂合金构件应力松弛时效形性协同制造工艺窗口的确定提供了重要支撑。     

大厚度扩散焊NLU成像检测技术

针对钛合金大厚度扩散焊,基于非线性超声(Non-linear ultrasonic,NLU)原理,构建了一种NLU成像方法和检测系统,设计制备了不同的大厚度扩散焊试件,进行了NLU成像检测试验分析。检测结果表明,采用NLU成像检测方法,可实现钛合金大厚度扩散焊的超声可视化检测,最大检测厚度可达70mm。     

复合材料超声检测复合缺陷多层成像实验分析

传统的超声B扫描和C扫描检测,并不能完全地展现复合材料复合缺陷的全貌,具有一定的局限性。本文通过实验的方法,对人工预制缺陷试样进行了水浸超声C扫描成像检测。在超声C扫描底波幅值成像原理的基础上,通过一次扫描,获取不同层深位置的超声反射信号进行切片C扫描成像,利用不同层深位置的切片C扫描图像观察材料内部的缺陷。实验结果表明,利用超声A、B、C扫描成像与切片C扫描成像相结合的方法对复合材料中的复合缺陷进行多角度成像,能够对复合材料内部的复合缺陷进行全方位的清晰显示。     

Electrochemical micromachining of microgroove arrays on phosphor bronze surface for improving the tribological performance

A high friction coefficient and a low wear rate of contacted surfaces are essential elements to friction pairs between the stator and the rotor in ultrasonic motors. It has been shown that surface textures have a significant effect on improving the tribological performance of friction pairs.In this paper, microgroove arrays are introduced to the stator surface for improving the tribological performance of friction pairs between the stator and the rotor in ultrasonic motors. Microgrooves were fabricated on a phosphor bronze surface by through-mask electrochemical micromachining(TMEMM). Parameters, namely, the electrolyte inlet pressure, applied voltage, pulse duty cycle,and frequency, were varied to investigate their influences on the dimensions and morphology of the microgrooves. Results showed that the width and depth of the microgrooves were strongly affected by the applied voltage and frequency, while the morphology of the microgrooves was dependent on the electrolyte inlet pressure and the pulse duty cycle. Compared with a smooth surface, the friction coefficient increased from 0.245 to 0.334 and less abrasion was obtained when a surface was textured with microgrooves of which the width and depth were 185.6 and 57.6 lm,respectively. Microgroove arrays might play an important role in enhancing the performance of ultrasonic motors.     

复合材料T-形R区超声反射法检测与缺陷判别

R区缺陷的检测是碳纤维复合材料结构中无损检测的焦点,针对此问题,以T-形R区为例,通过研究入射超声波在复合材料结构T-形R区产生回波信号及其特征,在典型超声检测试验验证分析基础上,提出了一种适用于复合材料结构T-形R区在线超声检测方法。系列超声检测与验证结果表明:采用水膜耦合超声检测技术,通过选择不同的声波入射方向,可有效地实现复合材料结构中T-形R区的覆盖检测;根据来自T-形R区的超声回波信号的时域特征可有效地进行缺陷的判别和确定检出缺陷所在铺层位置;表面检测盲区可达0.13mm(即单个复合材料铺层厚度)。解剖验证结果显示了超声检测结果与实际工艺缺陷的良好一致性。     

Dependence of creep age formability on initial temper of an Al-Zn-Mg-Cu alloy

The initial temper of the material may directly affect the whole creep age forming(CAF)process. In terms of creep deformation and stress relaxation, using the constant-stress creep aging and constant-strain stress relaxation aging tests, the relationship between initial temper and CAF formability is investigated for an Al-Zn-Mg-Cu alloy at 165 °C for 18 h. Three tempers are selected as the initial tempers in CAF, viz., solution, retrogression and re-solution. The CAF formability of this alloy with initial temper of retrogression is the best, and the creep strain of the retrogression tempered specimen after creep aging of 18 h is about 1.21 and 1.34 times than that of the solution and the re-solution tempered specimens, respectively. The calculated stress exponents of this alloy with three initial tempers range from 7.3 to 9.5, indicating that the CAF of this alloy is mainly controlled by the dislocation creep. The various formability for three initial tempers are attributed to different inhibitions of the transgranular precipitates on the dislocation movement. For the retrogression temper, the initial fine and uniformly distributed precipitates are seriously coarsened after6 h of CAF, which minimally inhibit the dislocation movement. While, for the re-solution temper,the fine precipitates are re-precipitated in the matrix of the alloy, which observably hinder the dislocation movement and lead to the worst formability.     

用阻抗均匀过渡法研制高分辨力换能器

分辨力是超声探伤用换能器的关键指标，本文从理论和实验两方面探讨了如何利用机械阻抗均匀过渡法提高换能器分辨力的有关问题。