某型飞机座舱温度调节系统检测仪的研制

为满足某型飞机座舱温度调节系统原位检测的需要，结合外场实际．研制了该型飞机的座舱温度调节系统检测仪。经用户使用证明．该检测仪能够满足飞机的检测需要。     

基于单片机的多点温度采集系统设计

随着单片机技术的迅速兴起与蓬勃发展,其稳定、安全、高效、经济等优点十分突出。为了实现多点温度数据的精确采集,采用了一种基于单片机AT89C52为核心的数据采集系统,该系统具有电路简单、功耗低、抗干扰能力强、可靠性高等优点,能够通过DBW热电阻变送器对热电阻随温度的变化而得到的模拟信号进行采集,并通过A/D转换器对模拟信号进行模数转换;同时实现基本的人机对话功能,包括使用按键设定温度报警阀值,通过LED数码直读显示检测点、温度等功能。其温度测量精度可达到1℃。     

ZrB2 及其复合陶瓷的高温抗氧化性能

综述了ZrB_2及其复合陶瓷的高温氧化行为,认为ZrB_2陶瓷是一种优异的高温结构材料,其氧化失效是由于氧化产物B_2O_3保护层挥发失效而导致的;二元陶瓷ZrB_2-SiC由于SiC的加入,高温抗氧化性能大大提高,并对其在不同温度下的氧化物结构进行了阐述。在此基础上提出了进一步提高ZrB_2-SiC陶瓷抗氧化性能和服役温度的方法,并以添加TaC和LaB_6形成三元复相陶瓷为例进行了说明。     

On the origin of ultrahigh energy cosmic rays

The origin of cosmic rays with energy E ? 10¹⁸ eV is a long-standing problem in astrophysics. The development of ever larger detectors has brought in key experimental results in the past decade, most particularly the detection of a cut-off at the expected position for the long sought Greisen–Zatsepin–Kuzmin suppression as well as evidence for large scale anisotropies. This paper summarizes and discusses the recent achievements in this field.     

高精度温度控制方式述评

对高精度温度控制系统中常用的模拟控制方式、数字控制方式和模拟/数字控制方式作了比较,目的在于找到既能满足计量检定恒温装置所需的技术指标、又方便实用的控制方式.     

热管式表面温度计检定装置

叙述一种热管式表面温度计检定装置的原理、结构。该装置可用于航天领域在实验室条件下对表面温度计的检定。     

Tidal associated temperature disturbances observed at the middle atmosphere (30–65 km) by a Rayleigh lidar at 23°S

A lidar has been operated in São José dos Campos, Brazil (23.2°S, 45.8°W) since 1972, mainly dedicated to the study of mesospheric sodium at the 589 nm resonant line. The molecular Rayleigh scattering can also be used provided we limit the height to ∼75 km where the sodium scattering begins. Nevertheless, the weak signal obtained only permits the determination of density and temperature profiles by accumulating a large number of shots giving only nocturnal average profiles. Temporal variations in density and temperature on the scale of hours can however, be obtained by performing a superposed epoch analysis for a given time interval and covering a period of several days. In this way we obtained hourly mean profiles grouped by months, seasons and overall, with data acquired from 1993 to 2004. The difference between the hourly temperatures and the nocturnal means shows for some months, with enough data coverage, downward propagating structures that apparently have tidal origin. The seasonal averages show a recurrent feature with high temperatures before and low temperatures after midnight above 50 km. Some similarity is found with the GSWM model, but the observed temperature amplitudes are twice of that for the model.     

飞行中大气瞬时温度的获取

根据＊＊飞机上，ＣＷ－１００２和Ⅱ－５的试飞结果，对两种产品的性能做了对比分析；对飞行中大气温度的获取方法提出了的新意见。     

液体火箭发动机涡轮泵用机械密封温度场及热载变形研究

基于ANSYS数值计算软件,建立了液体火箭发动机涡轮泵用机械密封的二维稳态传热模型,依靠经验公式确定了模型的对流换热系数。计算了密封环的温度场和热载变形,分析了密封端面比压、回流流量以及不同材质对密封温度场的影响规律。结果表明:密封端面最高温度发生在靠近密封环内径处,且密封端面比压越大密封环温度梯度越大;密封环热载变形呈收敛间隙,最大变形发生在动环端面的外径处,其值约为2.2μm;密封环端面最高温度随回流流量增加而减小,当回流流量从0.1~0.6 kg/s变化时,密封环端面最高温度可降低18%(从100℃降至82℃);当回流流量增大到0.3 kg/s时,继续提高对密封环端面温升的控制不再显著;采用高导热系数的摩擦副材料能够显著降低端面温升和温度梯度,提高密封工作可靠性。     

一种新型正弦压力发生器

介绍了一种利用压电叠堆激励管道内液体介质发生谐振产生正弦压力的发生装置.与其它正弦压力发生器相比,本装置压力源的激励方式新颖,工作频率较高,所产生的正弦压力波的幅值较大,失真度较小.