曲面不锈钢/微晶玻璃层状复合材料的设计制备

设计制备了与1Cr17和0Cr18Ni9不锈钢匹配的CaO-Al2O3-SiO2(CAS)系和BaO-Al2O3-SiO2(BAS)系微晶玻璃,研究了微晶玻璃的各项理化性能。利用流延法制备微晶玻璃生带,以此制备符合曲面不锈钢/微晶玻璃层状复合材料,并对复合材料相关性能进行测试。结果表明,所设计制备的玻璃经850℃、30min热处理后可形成线胀系数与对应不锈钢匹配的微晶玻璃,且具有适宜弯曲强度和较低介电常数、介质损耗;由此制备的曲面不锈钢/微晶玻璃层状复合材料具有良好的绝缘性能、结合强度和抗热冲击性能。     

含内热源球壳的复合传热特性及其表面温度均匀性研究

应用计算流体动力学方法,对带内热源的空腔球壳所涉及的含导热、自然对流和辐射换热的耦合传热问题进行了数值建模,得到了球壳空腔内、外侧流体的温度场、速度场。在数值模拟基础上,提出并试验验证了能有效提高球壳外表面温度均匀性的电加热绳方案。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

复合材料修理技术浅论

介绍了复合材料的特点及加工工艺方法,针对目前复合材料存在的损伤容限/耐久性设计在理论上尚不完善等一些问题,着重阐述了复合材料的修理技术,对飞机设计及制造具有一定的参考作用。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

先进复合材料格栅结构制造工艺技术的研究进展

介绍了复合材料格栅结构的特点及发展现状,并回顾了传统复合材料成型工艺方法和格栅结构的早期制造方法。另外,介绍2种新型的格栅结构加工方法,即混合加工法、膨胀模块加工法以及改进的格栅结构:互锁复合材料格栅结构、加套管的槽形连接格栅结构和TR IG结构;并分别说明了每种结构的优点。其中重点介绍了混合加工法并从理论上推导其可行性。最后总结了复合材料格栅结构制造工艺的发展趋势。     

两种中温固化胶粘剂的剪切疲劳和蠕变性能研究

研究了SY 2 4B胶膜和SY H2糊状胶粘剂的剪切疲劳和蠕变性能。SY 2 4B胶膜和SY H2糊状胶粘剂同为中温固化的结构胶粘剂 ,SY 2 4B胶膜采用橡胶增韧 ,SY H2糊状胶粘剂采用热塑性树脂增韧。SY 2 4B胶膜虽然具有优异的韧性 ,但SY H2糊状胶粘剂的剪切疲劳和蠕变性能优于SY 2 4B胶膜 ,这与增韧剂种类与胶层厚度有一定关系。温度、应力和时间也是影响蠕变量的重要因素     

C/SiC复合材料超声振动钻孔评估

在分析碳纤维增强碳化硅复合材料的力学性能、密度、孔隙率和弯曲强度的基础上 ,进行了超声钻孔工艺试验 ,检测并研究了材料去除率、孔径差、孔边质量和工具损耗情况 ,得出了超声钻孔是一种好的加工方法的结论。     

数字化设计制造技术在直升机复合材料结构中的应用

本文论述了数字化设计与制造的基本概念,介绍了应用于复合材料结构数字化设计制造的相关软件,提出了复合材料结构数字化设计制造的主要内容及相关流程和应用实例。     

新型活动密封件的研究与应用

根据飞机液压系统橡胶密封圈使用中易出现老化,引起串油、串气等故障问题,结合某机型试验提出新材料密封圈改进方案,以满足系统的高温及动密封性使用要求。试验结果表明,新材料密封圈适合高温、动密封部位的使用,可以替代丁腈试5171橡胶密封圈,应用于液压系统,提高系统性能。