旋转机翼悬停气动特性研究

鸭式旋转机翼(CRW)是一种先进的高速直升机方案,旋翼同时也是机翼,是其最关键气动部件之一。采用结构分区拼接网格技术进行空间离散,分区建立参考系,通过求解多重参考系下的N-S方程来计算旋翼流场,首先以传统的Caradonna-Tung实验旋翼的亚、跨声速悬停流场分析为例验证该方法的可靠性,进而采用该方法对旋转机翼悬停流场进行了数值计算,旋翼拉力计算值和地面实验值吻合较好,结果分析表明旋转机翼的悬停流场有着不同于传统旋翼的流场特性。     

小型无人倾转旋翼机气动与操纵特性试验研究

由于倾转旋翼机飞行模式多,各部件气动干扰复杂且操纵面冗余,特别是倾转过渡模式,短舱带动旋翼系统倾转,结构布局发生改变,从理论上确定气动与操纵特性难度大。为了研究倾转旋翼机的气动与操纵特性,对某小型无人倾转旋翼机展开全尺寸、全模式吹风试验,其中不带动力试验主要用于研究倾转旋翼机在不同迎角、短舱倾角、前飞速度等飞行状态下的气动特性;带动力试验主要用于研究倾转旋翼机不同飞行模式带机翼与不带机翼时,旋翼/机翼/襟副翼相互干扰作用,以及总距、副翼、升降舵的操纵功效。根据试验数据推导出小型无人倾转旋翼机全包线飞行的操纵特性方法,对进一步完善倾转旋翼机设计以及试飞试验的成功提供了参考。     

基于定位特征点的叶片锥束CT点云模型配准方法

针对实际生产过程中锥束CT检测空心涡轮叶片的点云数据与计算机辅助设计模型的配准问题,提出了一种基于定位特征点的叶片锥束CT点云模型配准方法。首先将点云数据与计算机辅助设计模型进行预配准;然后查找空心涡轮叶片的设计定位特征点坐标;最后根据定位基准点寻找点云数据上与之对应的基准点,并建立各自坐标系,根据坐标系进行几何变换,迭代直至满足要求,从而完成精确配准。试验结果表明,该方法很好地实现了锥束CT点云模型的配准定位,满足了实际生产要求。     

三坐标测量涡轮导向叶片排气面积的方法研究

涡轮导向叶片排气面积是叶片设计和加工中的重要参数,能够显著影响整机性能。为了精确测量涡轮导向叶片排气面积,对三坐标测量机测量叶片排气面积的方法进行研究。在三坐标上测量涡轮叶片排气面积,分别采用触测法和扫描型线法两种测量方法,并对测量结果进行对比分析。通过对涡轮导向叶片排气面积的实际测量,总结了三坐标测量机测量涡轮导向叶片排气面积的测量方法、测量步骤、数据处理方式以及测量不确定度分析。     

倾转旋翼机小速度前飞的尾迹涡演化及其对平尾的影响

采用基于运动嵌套网格的CFD方法计算了倾转旋翼机直升机状态和过渡状态下的流场,研究了在小速度前飞下的尾迹涡演化和其对平尾气动力的影响.直升机状态下,前飞速度≤4m/s时,旋翼尾迹主要在机翼附近,与机翼干扰形成喷泉效应,但对平尾无影响.随着前飞速度增大,喷泉效应与自由来流的综合作用形成喷泉涡,喷泉涡产生于机翼上表面,呈流...     

动力涡轮转子结构系统力学特性稳健设计方法

航空涡轴/涡桨发动机动力涡轮转子是典型多支点支承、具有连接界面、质量/刚度分布不均匀的高速柔性转子系统,其连接结构力学特性和支承刚度的分散性可导致转子系统动力特性恶化。针对典型动力涡轮转子结构系统,指出不可恢复滑移、疲劳、摩擦等连接界面接触损伤是连接结构力学特性产生分散性的内在原因,提出了接触状态系数、接触应力、不可恢复变形能和接触摩擦功等工程适用的定量评估参数。通过对多支点柔性转子-支承系统临界转速分布及其对各支点支承刚度敏感度的影响规律分析,提出了基于支承刚度低敏感区择优的动力特性稳健设计方法,所提方法提高了转子结构系统的稳健性。      

具有初始热变形的转子系统振动响应分析

航空发动机热起动时的温度分布不均会使转子产生初始热变形,进而引起发动机振动过大,甚至导致起动失败。针对此问题,以航空发动机中的典型转子为对象,根据初始热变形对转子振动的影响建立相应的动力学方程,并通过模态坐标变换分析初始热变形对转子系统振动响应的影响。结果表明,初始热变形相当于对转子作用了附加激励,包括转轴初始弯曲激励、附加不平衡激励和附加陀螺力矩激励,上述激励均与转速同步。其中,附加不平衡激励和附加陀螺力矩激励大小与转速有关,对转子通过各阶临界转速的振动响应均有较大影响;转轴初始弯曲激励大小与转速无关,主要影响低阶临界转速的振动响应。      

Investigation on nonlinear lateral-torsional coupled vibration of a rotor system with substantial unbalance

Substantial unbalance may be caused by fan blade off during the operation period of gas turbine engines, and related dynamic problems are very critical to the safety design of rotor system in aero-engine. This article aims to understand lateral-torsional coupled vibration of the rotor system with substantial unbalance. The governing equation of a modified unbalanced rotor system is established based on Lagrangian approach. Then, a mathematical analytical method is proposed in which a linear approximation is derived and the Floquet theory and Hill’s method are incorporated, from which the modal characteristics of the unbalanced rotor are obtained. The modal characteristics of the unbalanced rotor system are revealed comprehensively for the first time. Furthermore, the relation between the modes and responses of the unbalanced rotor is discussed in detail. The results show that the lateral vibration and torsional vibration of the unbalanced rotor are coupled through the inertial terms in the governing equations. Due to the coupling, veering and lock-in phenomena occur between the frequencies of the forward whirl mode and the torsional mode. Furthermore, lock-in can lead to a kind of principal instability. With regard to the response of the unbalanced rotor, both natural vibration components and enforced vibration components appear in the lateral response, while only natural vibration components appear during torsional vibration. Moreover, natural vibration components play a crucial role in the response within the principal instability region and cause divergence of the vibration amplitudes in the lateral and torsional directions.     

直升机后缘襟翼驱动器迟滞现象仿真与抑制

直升机后缘襟翼多采用压电驱动器作为驱动元件，但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响，因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性，采用Bouc-Wen模型对驱动器迟滞现象进行了建模，并采用粒子群算法（PSO）辨识模型参数，与实际测量迟滞曲线进行了对比，在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略，实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型，并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真，仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能，而采用复合控制可以提高后缘襟翼旋翼振动控制性能。     

A novel control method for turboshaft engine with variable rotor speed based on the Ngdot estimator through LQG/LTR and rotor predicted torque feedforward

In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed, a cascade PID control method based on the acceleration estimator of gas turbine speed (Ngdot) and rotor predicted torque feedforward is proposed. Firstly, a two-speed Dual Clutch Transmission (DCT) model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed. Then, an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery (LQG/LTR) is proposed for power turbine speed cascade control. Finally, according to the cascade PID controller based on Ngdot estimator, a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network (MGD-NN) is put forward to compromise the influence of rotor torque interference. The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control, the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%, which possesses faster response, superior dynamic effect and satisfactory robustness performance. The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.