Design of nanofluid-cooled heat sink using topology optimization

The paper presented topology optimization of 2D and 3D Nanofluid-Cooled Heat Sink (NCHS). The flow and heat transfer problem in the NCHS was treated as a single-phase nanofluid based convective heat transfer model. The temperature-dependent fluid properties were taken into account in the model due to the strong temperature-dependent features of nanofluids. An average temperature minimum problem was studied subject to the fluid area and energy dissipation constraints by using the density method. In the method, the design variable is updated according to the gradient information obtained by an adjoint based sensitivity analysis process. The effects of the energy dissipation constraint, temperature-dependent fluid properties and nanofluid characteristics on optimal configurations of NCHS were numerically investigated with following conclusions. Firstly, branched flow channels in the optimal configuration increased with the rise of the allowed energy dissipation. Secondly, temperature-dependent fluid properties were significant for obtaining the appropriate optimal results with best cooling performance. Thirdly, heat transfer performances of optimal configurations were enhanced by reducing the nanoparticle diameter or increasing the nanoparticle volume fraction. Fourthly, the optimal configuration for nanofluid had better cooling performance than that for its base fluid.     

摩擦体系结构分析和定量建模的熵探索

提出摩擦系统演化的3种基本形式。在非平衡态热力学熵平衡方程的框架下构造摩擦系统的数学模型．用熵产生表征摩擦磨损过程的各种现象。讨论了各因素的物理量纲及其统一到熵的途径。研究表明．用非平衡态热力学研究摩擦磨损有助于摩擦学的系统分析．熵产生可以定量表示摩擦磨损过程的所有因素——材料破坏、摩擦发热、摩擦化学反应以及摩擦相变等摩擦过程的物理化学变化。     

Theoretical modeling of vectoring dual synthetic jet based on regression analysis

The excellent vectoring characteristic of Dual Synthetic Jet (DSJ) provides a new control strategy for the active flow control, such as thrust vectoring control, large area cooling, separated flow control and so on. For incompressible flow, the influence relation of source variables, such as structure parameters of actuators, driving parameters and material attributes of piezoelectric vibrating diaphragm, on the vectoring DSJ and a theoretical model are established based on theoretical and regression analysis, which are all verified by numerical simulations. The two synthetic jets can be deemed as a main flow with a higher jet velocity and a disturbing flow with a lower jet velocity. The results indicate that the influence factors contain the low-pressure area formed at the exit of the disturbing flow, which could promote the vectoring deflection, and the impact effect of the disturbing flow and the suppressive effect of the main flow with the effect of restraining the vectoring deflection. The vectoring angle is a complex parameter coupled by all source variables. The detailed theoretical model, whose error is controlled within 3.6 degrees, can be used to quantitatively assess the vectoring feature of DSJ and thus to provide a guidance for designing the control law applied in the active flow control.     

一种星间设备系统偏差的标定方法

针对Ka波段测距体制中星间测距设备系统偏差标定困难从而影响自主导航精度的问题,提出用星地无线电双向时间比对的方法标定星间设备系统偏差。通过两条星地双向链路并在这两颗卫星间建立一条星间双向链路进行标定。结果表明：该方法能够标定星间设备系统偏差,其RMS优于1ns,从而起到提高星间时间同步精度的目的。     

Analysis of spacecraft motion under constant circumferential propulsive acceleration

This paper reassesses the classical circumferential-thrust problem, in which a spacecraft orbiting around a primary body is subjected to a propulsive acceleration of constant modulus, whose direction is in the plane of the parking orbit and orthogonal to the spacecraft-primary line. In particular, a new formulation is proposed to obtain a reduction in the number of differential equations required for the study of the spacecraft propelled trajectory. The mathematical complexity of the problem may be further reduced assuming that both the propulsive acceleration modulus and the spacecraft distance from the primary body are sufficiently small. In that case, an approximate model is able to accurately describe the characteristics of the propelled trajectory when the parking orbit is circular. Finally, using the data obtained by numerical simulations, the approximate model is extended to generate a set of semi-analytical equations for the analysis of a classical escape mission scenario.     

地球同步轨道区域电磁频谱监视效能分析

地球同步轨道区域电磁频谱的监视效能进行了分析和仿真。首先针对目标卫星主瓣,进行了频谱监视的目标覆盖率与监视概率分析,结果表明通过主瓣方式实现频谱监视的可行性较差;进而提出基于目标卫星副瓣进行频谱监视的方法。理论分析得到了实现同步轨道目标卫星全覆盖的轨道高度差、监视角及监视距离之间的关系;最后以实际在轨的同步轨道卫星作为目标样本库,进行目标覆盖率仿真分析,结果验证了基于目标卫星副瓣进行地球同步轨道区域电磁频谱监视是可行的。     

基于流场函数的变刚度层合板铺放设计

文章提出了一种新的变刚度铺层轨迹设计方法,即采用一对互相共轭的标量场函数实现复合材料变刚度铺层的轨迹定义和铺层设计。最后,通过有限元建模和算例对比方法,对直线铺放层合板和变刚度铺放层合板进行压缩特征值屈曲分析和非线性屈曲分析,得出变刚度铺放层合板的屈曲特性比直线铺放层合构件提高约23．62％,y方向的屈曲变形位移减小为直线铺层构件的59．47％,大幅度提高了构件的抗压缩屈曲特性,同时也验证了该设计方法的可行性和实用价值。     

主成分分析在物联网产业发展中的应用研究

物联网由于其广泛的应用领域和广阔的发展前景,自诞生之日起就得到世界各国和科学界的研究和重视,本文通过主成分分析方法对物联网产业发展生产要素的分析,选取具有代表性的全国八省,从发展潜力层面进行物联网产业发展能力的综合评价研究,筛选出对物联网产业发展有重要作用的生产要素指标,对物联网产业的发展规划提供必要的理论依据和参考。     

软件故障树分析实例研究

软件故障树分析(SFTA)是硬件或系统FTA的扩展,可应用于安全性关键软件的验证和可靠性分析.本文首先阐述了SFTA的原理和应用过程,然后介绍了结合某嵌入式软件进行实际应用的过程以及最小割集的生成,并在此基础上提出了对该软件的改进建议.     

脉冲等离子体推力器内部流场的数值分析

应用所建立的广义拉格朗日乘子形式的磁流体力学模型对平行电极型脉冲等离子体推力器的内部流场进行了数值研究.对等离子体流动过程的分析表明,放电初期等离子体在很强的电磁力作用下高速喷出推力器,而到放电后期等离子体受到的气动力比电磁力大得多,等离子体的运动非常缓慢.电磁冲量占推力器元冲量的大部分,增强电磁加速作用可以进一步提高推力器的性能.