TC4钛合金切削中切屑塑性变形分析

对TC4钛合金切削过程中锯齿形切屑形成过程和切削力的关系进行了实验研究,并对锯齿形切屑形成中微观塑性变形区进行了分析。结果表明:当切削速度大于48.75 m/min时,切屑由带状转变为锯齿形。锯齿形切屑的形成导致了切削过程中切削力的波动变化,切削力与切屑的锯齿形变化规律一致,锯齿形切屑形成中塑性变形区的宽度随切削速度的增加而减小。     

Review on residual stress and its effects on manufacturing of aluminium alloy structural panels with typical multi-processes

In the aerospace industry, integrated aluminium alloy plates and stiffened panels with high accuracy and performance attract significant interest. To manufacture these panels as integrity with high accuracy, multiple processes need to be utilised, such as machining, welding and forming. During the whole manufacturing chain, residual stresses can be generated and redistributed in the components among different processes. The residual stress would significantly affect the shapes and properties of the final products. Currently, these great effects are not well considered in the design and manufacturing processes. This paper aims to draw a general understanding of the residual stress generated in the pre-manufacturing processes and its effects on subsequent manufacturing processes. The mechanisms and distributions of residual stresses generated in typical pre-manufacturing processes of structural panels, including machining, welding and additive manufacturing (AM), are firstly summarised. The detailed effects of generated residual stresses on distortion and application properties in subsequent manufacturing processes are then concluded. In addition, current methods developed for the investigation of residual stress effect in multi-processes manufacturing are critically reviewed, including experimental, analytical, finite element (FE) and machine learning methods. Furthermore, the future development trend of methods for residual stress consideration and control in the design of manufacturing processes is summarised, providing comprehensive guidance to achieve the high accurate manufacturing of aluminium alloy structural components.     

国产高模碳纤维/环氧复合材料的太阳电池板热循环适应性研究

国产CCM40J-6K高模碳纤维基板的空间高低温热循环耐受性是决定其是否可以大规模应用于空间太阳电池板的关键因素，必须解决交变热环境下的面板与电池电路的匹配性和长寿命问题。本文以国产CCM40J-6K高模碳纤维/环氧复合材料的太阳电池板为研究对象，开展了热循环环境适应性试验研究，分别从国产和进口碳纤维基板适应高低温交变能力对比、国产碳纤维基板铺设电池电路后适应热环境能力以及电池板在轨寿命等3个方面进行测试试验。结果表明：国产碳纤维CCM40J-6K所构成的电池板综合性能与进口M40JB-6K相当，CCM40J-6K基板与三结砷化镓电池片匹配性良好，国产碳纤维电池板经疲劳热循环后的开路电压和短路电流的变化率分别为0.55%和0.24%，太阳电池片和玻璃盖片外观完好无损，太阳电池电路与基板聚酰亚胺面保持绝缘，且碳纤维表面无脱粘现象。说明国产碳纤维CCM40J-6K能够应用于太阳电池板研制。     

复合材料整流罩声学等效建模与低频隔声性能研究

运载火箭发射过程中的恶劣噪声环境会导致整流罩内部电子设备失效。开展整流罩的内声场环境预测以及隔声分析,对其降噪研究和优化设计具有重要意义。复合材料整流罩舱壁大量使用蜂窝夹芯板,基于蜂窝夹芯结构精细化模型开展整流罩内声场环境预示计算量大,无法适用。本文建立了复合材料蜂窝夹芯板的力/声学等效模型,并利用精细化模型验证等效模型的精度;进一步基于有限元-边界元方法对某整流罩结构进行低频声振分析;同时,对整流罩的隔声量进行了评价。结果表明:整流罩内声场在频率为160 Hz附近声学环境较为恶劣,整流罩的降噪研究应针对该频段进行。