DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

基于BDI模型的Agent在航班时隙分配问题研究

随着民航运输的快速发展,时隙资源日益紧缺,为了保证航班的正常飞机,提出了基于BDI(Beliefs-Desires-Intentions)Agent分布式时隙优化模型,并对厦门机场某一时间段内的时隙分配进行验证,结果表明,模型可以大大减少航班的延误损失,具有较强的实际应用性。     

Experimental and numerical study of tip injection in a subsonic axial flow compressor

Parametric study of tip injection was implemented experimentally on a subsonic axial flow compressor to understand the underlying flow mechanisms of stability improvement of the compressor with discrete tip injection.Injector throat height varied from 2 to 6 times the height of rotor tip clearance,and circumferential coverage percentage ranged from 8.3％ to 25％ of the annulus.Static pressure fluctuations over the rotor tip were measured with fast-response pressure transducers.Whole-passage time-accurate simulations were also carried out to help us understand the flow details.The combinations of tip injection with traditional casing treatments were experi mentally studied to generate an engineering-acceptable method of compressor stall control.The results indicate that the maximum stability improvement is achieved when injectors are choked despite their different sizes.The effect of circumferential coverage percentage on compressor stabil ity depends on the value of injector throat height for un-choked injectors,and vice versa.Tip blockage in the blade passage is greatly reduced by the choked injectors,which is the primary reason for stability enhancement.The accomplishment of blockage diminishment is maintained in the circumferential direction with the unsteady effect of tip injection,which manifests as a hysteresis between the recovery of tip blockage and the recovery of tip leakage vortex.The unsteady effect is primarily responsible for the effectiveness of tip injection with a partial circumferential coverage.Tip injection cannot enhance the stability of the rotor with axial slots significantly,but it can improve the stabil ity of the rotor with circumferential grooves further.The combined structure of tip injection with circumferential grooves is an alternative for engineering application.     

基于随机时隙的RFID读写器防冲突方法

针对密集读写器环境下的无线射频识别(RFID,Radio Frequency Identification)多读写器冲突情况,提出了一种基于随机时隙并通过中央计算机协调的读写器防冲突方法.首先,中央计算机发送每轮起始命令和时隙指令,读写器根据当前利用率随机选择时隙.选择当前时隙的读写器若没有接收到忙信号则发送信标并侦听,若无邻近读写器发送信标则开始读写标签,否则该轮回停止工作.若时隙末存在没有接收到忙信号的读写器则在额外时隙发送二次信标.与现有的分布式防冲突方法相比,该方法具有较好的吞吐量和公平性.     

多喷口环量控制翼型流动的研究

提出了多喷口环量控制翼型的想法，并进行了数值研究。结果表明，多喷口环量控制方法可以在中、小Ｃμ吹气时提高翼型的升力和减小能耗，并能改善环量控制翼型在较高来流马赫数下的气动性能，避免“压缩性失速”。     

跟进起飞间隔时间的确定

针对歼击机机群跟进起飞的特点，从飞机尾涡的形成和发展入手，研究近地条件下的尾涡运动规律，导出了导涡的诱导速度和漂移速度计算公式。并根据起飞过程中，后机受前机尾涡的影响范围仅局限于跑道宽度范围之内，对歼击机跟进起飞间隔时间的确定方法和影响因素进行了分析，为各型歼击机跟进起飞安全提供了理论依据。所得结论经过飞行验证，符合实际。     

低速离心压气机非稳态流和机匣处理的数值分析

机匣处理能够改善压气机稳定裕度,扩大其稳定工作范围。为了验证并分析其扩稳机理,对带沿气流流向槽的低速离心压气机内部进行了全三维数值模拟,将数值计算结果与实验结果进行了比较,并详细对比分析了实壁机匣和机匣处理后离心压气机转子顶部区域流场结构,以及阐述了机匣处理对叶顶间隙泄漏涡和二次流等非稳态三维紊流流动的影响。     

基于 SMS P和 C & I 方式的假目标干扰效果研究

SM SP和C&I是美国科学家提出的两种新型假目标干扰产生方式，其主要是对DRFM 技术截获的雷达信号进行抽取、复制、组合，生成干扰信号，可在雷达接收端形成密集假目标干扰，并具有一定的移频和压制效果。建立了两种假目标干扰的数学模型，通过研究脉压后的干扰波形，分析子脉冲数目、时隙等因素对干扰效果的影响。     

多种气膜冷却形式下轴对称矢量喷管壁温计算研究

航空发动机矢量喷管的冷却结构设计是研究矢量推进技术应用的关键问题之一。针对某偏转20°轴对称矢量喷管隔热屏采用的十种气膜冷却结构,建立基于壁面传热的热平衡方程,采用牛顿-拉斐尔森迭代法得出十种冷却结构下壁面及隔热屏的温度。其中气膜冷却采用有效温比经验公式计算,燃气辐射采用封闭腔净辐射分析法计算,并把本文计算的壁温与文献结果进行对比分析。结果表明:隔热屏对喷管收敛段有很好的冷却作用,采用气膜冷却可显著降低其温度;相对于受隔热屏保护的收敛段而言,喷管扩张段的受热形势较为严峻,温度更高,其冷却有待加强。     

Effect of tip geometry and tip clearance on aerodynamic performance of a linear compressor cascade

The tip leakage flow between a blade and a casing wall has a strong impact on compressor pressure rise capability, efficiency, and stability. Consequently, there is a strong motivation to look for means to minimize its impact on performance. This paper presents the potential of passive tip leakage flow control to increase the aerodynamic performance of highly loaded compressor blades. Experimental investigations on a linear compressor cascade equipped with blade winglets mounted to the blade tips have been carried out. Results for a variation of the tip clearance and the winglet geometry are presented. Current results indicate that the use of proper tip winglets in a compressor cascade can positively affect the local aerodynamic field by weakening the tip leakage vortex. Results also show that the suction-side winglets are aerodynamically superior to the pressure-side or combined winglets. The suction-side winglets are capable of reducing the exit total pressure loss associated with the tip leakage flow and the passage secondary flow to a significant degree.