Dynamic response analysis under atmospheric disturbances for helicopters based on elastic blades

A flight dynamics model based on elastic blades for helicopters is developed. Modal shape analysis is used to describe the rotating elastic blades for the purpose of reducing the elastic degrees of freedom for blades. The analytical result is employed to predict the rotor forces and moments. The equilibrium equation of the flight dynamics model is then constructed for the elastic motion for blades and the rigid motion for other parts. The nonlinear equation is further simplified, and the gradient descent algorithm is adopted to implement the trim simulation. The trim analysis shows that the effect of blade elasticity on the accuracy of rotor forces and moments is apparent at high speed, and the proposed method presents good accuracy for trim performance. The time-domain response is realized by a combination of the Newmark method and the adaptive Runge-Kutta method. The helicopter control responses of collective pitch show that the response accuracy of the model at a yaw-and-pitch attitude is improved. Finally, the influence of blade elasticity on the helicopter dynamic response in low-altitude wind shear is investigated. An increase in blade elastic-ity reduces the oscillation amplitude of the yaw angle and the vertical speed by more than 70%. Compared with a rigid blade, an elastic blade reduces the vibration frequency of the angular veloc-ity and results in a fast return of the helicopter to its stable flight.     

GEO卫星寿命末期异常情况下离轨控制策略

为及时有效处置卫星寿命末期在轨突发情况,有针对性地做好卫星离轨的各项准备,控制与减小突发异常危害和不良影响,根据离轨控制要求,对异常情况下实施离轨的控制策略进行分析,提出了在燃料受限情况下"小步逼近"的多批次双脉冲离轨控制策略,以及在离轨控制时间受限情况下"大步远离"的短时间大控制量离轨控制策略,并通过仿真对控制策略进行了验证。结果表明,"小步逼近"控制策略能在燃料受限时尽可能地逼近坟墓轨道,"大步远离"控制策略能在较短的时间内将卫星送入坟墓轨道,该策略适用于GEO(Geostationary Earth Orbit,地球静止轨道)卫星寿命末期异常情况下的离轨控制。     

MBD模式下生产准备探索与实践

生产准备是影响航空产品快速切换的主要环节.为实现航空产品在MBD模式下的快速切换,剖析了航空产品生产准备的主要内容,探讨了MBD模式下航空产品生产准备信息传递模式以及影响航空产品生产过程快速切换的关键因素.     

DORIS-based point mascons for the long term stability of precise orbit solutions

In recent years non-tidal Time Varying Gravity (TVG) has emerged as the most important contributor in the error budget of Precision Orbit Determination (POD) solutions for altimeter satellites’ orbits. The Gravity Recovery And Climate Experiment (GRACE) mission has provided POD analysts with static and time-varying gravity models that are very accurate over the 2002–2012 time interval, but whose linear rates cannot be safely extrapolated before and after the GRACE lifespan. One such model based on a combination of data from GRACE and Lageos from 2002–2010, is used in the dynamic POD solutions developed for the Geophysical Data Records (GDRs) of the Jason series of altimeter missions and the equivalent products from lower altitude missions such as Envisat, Cryosat-2, and HY-2A. In order to accommodate long-term time-variable gravity variations not included in the background geopotential model, we assess the feasibility of using DORIS data to observe local mass variations using point mascons. In particular, we show that the point-mascon approach can stabilize the geographically correlated orbit errors which are of fundamental interest for the analysis of regional Mean Sea Level trends based on altimeter data, and can therefore provide an interim solution in the event of GRACE data loss. The time series of point-mass solutions for Greenland and Antarctica show good agreement with independent series derived from GRACE data, indicating a mass loss at rate of 210 Gt/year and 110 Gt/year respectively.     

单面射流冲击淬火参数对7050铝合金厚板冷却的影响

研究了喷嘴直径(D)、相邻喷嘴距离(L)和喷射压力(P)对驻点区和紊流区换热的影响.结果表明:在高压(500kPa)下,紊流区心部换热效果比驻点区心部强;当喷嘴直径和喷射压力一定,相邻喷嘴距离对厚板冷却有影响,距离越小,相邻涡对互相干扰越大,紊流区冷却强度加大;当L/D=8～14时,从470℃冷至300℃的平均冷却速率...     

Operant responding following exposure to HZE particles and its relationship to particle energy and linear energy transfer

On exploratory class missions astronauts will be exposed to a variety of heavy particles (HZE particles) which differ in terms of particle energy and particle linear energy transfer. The present experiments were designed to evaluate how these physical characteristics of different particles affect cognitive performance, specifically operant responding. Following exposure to ²⁸Si, ⁴⁸Ti, ¹²C and ¹⁶O particles at the NASA Space Radiation Laboratory rats were tested for their ability to respond appropriately to changes in reinforcement schedules using an operant task. The results showed that the effectiveness of different particles in disrupting cognitive performance, defined as the lowest dose that produced a performance decrement, varied as a function of the energy of the specific particle: for comparisons between different energies of the same particle (e.g., ⁵⁶Fe) the effectiveness of the particle was directly proportional to particle linear energy transfer, whereas for comparisons between different particles (e.g., ⁵⁶Fe and ¹⁶O) effectiveness was inversely proportional to particle linear energy transfer. The results are discussed in terms of the mechanisms that influence the effectiveness of different particles and energies and in terms of their implications for analyzing the possible risks to astronauts of decrements in cognitive performance following exposure to HZE particles on long-duration exploratory class missions.     

Analysis and experiments for delay compensation in attitude control of flexible spacecraft

Space vehicles are often characterized by highly flexible appendages, with low natural frequencies which can generate coupling phenomena during orbital maneuvering. The stability and delay margins of the controlled system are deeply affected by the presence of bodies with different elastic properties, assembled to form a complex multibody system. As a consequence, unstable behavior can arise. In this paper the problem is first faced from a numerical point of view, developing accurate multibody mathematical models, as well as relevant navigation and control algorithms. One of the main causes of instability is identified with the unavoidable presence of time delays in the GNC loop. A strategy to compensate for these delays is elaborated and tested using the simulation tool, and finally validated by means of a free floating platform, replicating the flexible spacecraft attitude dynamics (single axis rotation). The platform is equipped with thrusters commanded according to the on–off modulation of the Linear Quadratic Regulator (LQR) control law. The LQR is based on the estimate of the full state vector, i.e. including both rigid – attitude – and elastic variables, that is possible thanks to the on line measurement of the flexible displacements, realized by processing the images acquired by a dedicated camera. The accurate mathematical model of the system and the rigid and elastic measurements enable a prediction of the state, so that the control is evaluated taking the predicted state relevant to a delayed time into account. Both the simulations and the experimental campaign demonstrate that by compensating in this way the time delay, the instability is eliminated, and the maneuver is performed accurately.     

一种用于GPS时差比对数据处理的卡尔曼滤波器设计

介绍了一种用于GPS时差比对数据处理的自适应卡尔曼滤波器,在Matlab环境下编写了离散时间形式的卡尔曼滤波算法程序,利用该算法对GPS信号与铯原子频标的时差比对数据进行了分析处理,最后介绍了该算法的数字芯片FPGA实现。     

一种GEO卫星平台电推进轨道转移技术

为解决传统化学推进方式比冲小、燃料携带量大等问题,将化学推进平台改为全电推进平台。全电推进可节省卫星燃料,增加卫星载重比,延长卫星使用寿命,并且支持"一箭双星"发射。通过调研国内外全电推进卫星平台的进展情况,设计出使用电推进的轨道转移方案,并与传统推进方式进行对比。分析结果表明:卫星发射质量为2 700 kg,使用2台300 mN的推力器并联工作,从地球同步转移轨道(GTO)至地球同步静止轨道(GEO)的转移时间约为6个月,消耗燃料约650 kg,可满足任务需求。     

目标捕获后航天器组合体的角动量转移与抑振规划

针对失稳目标捕获后航天器组合体的位姿调整与稳定问题，提出一种组合体角动量转移与振动抑制复合规划方法。首先建立了同时考虑了空间机械臂、目标卫星太阳翼、服务卫星太阳翼等柔性构件的航天器组合体动力学模型。然后提出角动量转移优化方法，规划机械臂最终构型，保证组合体相对稳定后的角速度最小；基于粒子群算法设计了机械臂最优抑振轨迹规划方法，抑制角动量转移过程中的机械臂和太阳翼的柔性振动。最后通过数值仿真验证了规划方法的有效性。仿真结果表明，该方法能够有效实现组合体的角动量转移，并显著降低组合体的柔性振动，具有工程实用性。