Ni3Al金属间化合物中空位团稳定构型的计算机模拟研究

本文采用分子动力学方法,对金属间化合物Ni3Al中的点缺陷进行了计算机模拟研究,其中原子间相互作用势采用F-S多体势.通过计算Ni3Al中各种构型的空位团的形成能及结合能,进而分析比较各种构型的空位团的稳定性以及热平衡时的数量,总结了Ni3Al中空位的聚集规律.     

“五四”女作家关于母爱与情爱的抒写

“五四”女作家抒写的对象大多为婚姻、恋爱与家庭,也正是在这样的领域中,母爱与情爱的纠葛成为一个绕不开的话题。她们笔下的女性从母爱与情爱的激烈冲突以致为情爱而牺牲母爱;到母爱渐渐战胜情爱;再到最后彻底回归母爱,牺牲自我情感。从这个反叛、抗争与回归的过程中,体会在一个新旧时代交替之际刚刚获得觉醒女性的独特情怀。     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

Critical wake vortex encounter scenarios

A simulation-based method was developed to investigate the severity of Wake Vortex Encounters (WVEs). This paper describes an important part of this method: the determination of worst-case WVE conditions, which is referred to as Worst-Case Search (WCS). The WCS results permit to reduce time and costs of WVE severity related piloted simulator tests and allow the comparison of the hazard that vortices of different generator aircraft exert on a follower aircraft.The WCS is based on a high fidelity, offline simulation of the follower aircraft that includes the interacting wake vortex, a hazard criterion that rates the severity of each WVE, and a pilot model. It can be formulated as an optimisation problem that is solved with the optimisation tool MOPS (Multi Objective Parameter Synthesis). MOPS varies the encounter geometry until the simulation yields maximum values of the WVE hazard criterion.Worst-case encounter conditions for different parameters were investigated and sensitivity studies performed. The influence of the height above ground, the core radius, and the models for the wake vortex velocity profiles on the severity of a WVE was examined. To show the capability of the method, a comparison of the severity of a WVE behind two different heavy transport aircraft for a 20 t aircraft was made. The WCS method demonstrated its applicability and delivered the worst-case encounter geometry.

Zusammenfassung

Zur Untersuchung der Heftigkeit von Wirbelschleppen wurde eine simulationsbasierte Methode entwickelt. Dieser Beitrag beschreibt einen wichtigen Bestandteil dieser Methode: die Bestimmung der ungünstigsten (worst case) Einflugbedingungen in die Wirbelschleppe. Die Kenntnis dieser Bedingungen gestattet eine Zeit- und Kostenreduzierung bei wirbelschleppenbezogenen Simulatorversuchen mit Piloten und ermöglicht gleichzeitig einen Vergleich der vom Wirbel ausgehgehenden Gefährdung für verschiedene Kombinationen voraus- und einfliegender Flugzeuge.Die Worst-Case-Bedingungen werden mit einer Offline-Simulation des Folgeflugzeugs bestimmt, die Modelle für die Wechselwirkung mit der Wirbelschleppe und für das Pilotenverhalten sowie Kriterien für die Gefährdung durch den Wirbel umfasst. Für die Steuerung der Simulation und die Worst-Case-Suche wird die Optimierungssoftware MOPS (Multi Objective Parameter Synthesis) verwendet. MOPS variiert die Geometrie des Wirbelschleppendurchflugs bis die Simulation die maximalen Kriterienwerte für die Gefährdung durch den Wirbel liefert.Die Worst-Case-Bedingungen wurden für unterschiedliche Parameter untersucht. Der Einfluss der Höhe über Grund, des Kernradius' und der unterschiedlichen Modelle für das Wirbelgeschwindigkeitsprofil auf die von den Wirbelschleppen ausgehenden Gefährdung wurde dabei ermittelt. Um die Leistungsfähigkeit der Methode zu demonstrieren, wurde die Gefährdung von Wirbelschleppen zweier generierender Flugzeuge (heavy class) auf ein nachfolgendes 20 t Transportflugzeug verglichen. Die Anwendbarkeit der Methode wurde bestätigt und die ungünstigsten Einflugbedingungen berechnet.     

一种应用于实时深空干涉测量的电离层时延修正方法

针对"嫦娥4号"中继星任务S频段信标信号的高精度实时干涉测量需求,结合深空测控干涉测量系统采用的稀疏标校工作模式,研究验证了一种面向测控模式实时干涉测量的电离层时延修正方法。首先分析了电磁波经电离层传播的延迟机理及特性;基于深空站历史观测数据,通过自相关函数分析验证了天顶向TEC的周日特性;在此基础上,结合深空干涉测量中心数据处理设备软件系统,讨论了电离层时延修正方法;通过任务期间的实测数据处理分析,验证了所提方法可以将实时测量精度提升1～3 ns,对低仰角跟踪弧段,该技术方法优势更为明显。该方法为后续深入推进深空测控干涉测量系统在任务中的实时应用提供了技术储备。     

中国探月工程

"嫦娥4号"于2019年1月3日成功实现人类航天器首次在月球背面软着陆,"玉兔2号"月球车率先在月背刻上了中国足迹。至今,国际月球探测活动共实施126次,期间出现两个探月高潮。20世纪50—70年代,美苏两个航天大国之间的竞争引起第一轮探月高潮。20世纪末至今,各航天国家意识到月球探测的战略意义,纷纷提出月球探测计划并积极实施,月球成为各国争先探测的热点,掀起第二轮探月热潮。中国自2004年首次绕月探测工程立项实施以来,共开展了"嫦娥1号""嫦娥2号""嫦娥3号""嫦娥4号"及再入返回飞行试验共5次月球探测任务,实现"五战五捷",在空间技术、空间科学与应用、国际合作等方面取得了非凡成就,积累了丰富的经验,后续将继续开展以无人月球科研站为主的月球探测活动。     

六自由度激励台精密高刚度铰链结构设计与试验应用

精密高刚度铰链作为六自由度并联激励平台中的关键组件,其性能高低对激励台的控制精度有直接影响。针对铰链所需满足的高刚度、高基频和无间隙等要求,文章提出了基于虎克铰结构的铰链设计方法。首先根据铰链所处的工况确定选用圆锥滚子轴承作为旋转支撑部件,并通过对轴承的配置和预紧实现无间隙振动运动的要求,从而确定了铰链结构形式。然后,利用有限元法校核了结构的刚度与基频,进而完成铰链结构方案和样机制造,并将样机集成于激励台中。最后,开展了铰链动态特性试验和激励台振动控制试验,分别获取了铰链的基频和激励台控制响应。结果表明,铰链可满足激励台工作频段内的使用要求,铰链设计合理。     

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

Particle-tool interactions, which govern the synergetic deformation of SiC particle reinforced Al matrix composites under mechanical machining, strongly depend on the geometry of particle position residing on cutting path. In the present work, we investigate the influence of cutting path on the machinability of a SiCp/Al composite in multi-step ultra-precision diamond cutting by combining finite element simulations with experimental observations and characterization. Be consistent with experimentally characterized microstructures, the simulated SiCp/Al composite is considered to be composed of randomly distributed polygonally-shaped SiC particles with a volume fraction of 25vol%. A multi-step cutting strategy with depths of cut ranging from 2 to 10 μm is adopted to achieve an ultimate depth of cut of 10 μm. Intrinsic material parameters and extrinsic cutting conditions utilized in finite element simulations of SiCp/Al cutting are consistent with those used in corresponding experiments. Simulation results reveal different particle-tool interactions and failure modes of SiC particles, as well as their correlations with machining force evolution, residual stress distribution and machined surface topography. A detailed comparison between numerical simulation results and experimental data of multi-step diamond cutting of SiCp/Al composite reveals a substantial impact of the number of cutting steps on particle-tool interactions and machined surface quality. These findings provide guidelines for achieving high surface finish of SiCp/Al composites by ultra-precision diamond cutting.     

Predictive fault-tolerant control of an all-thruster satellite in 6-DOF motion via neural network model updating

The problem of controlling an all-thruster spacecraft in the coupled translational-rotational motion in presence of actuators fault and/or failure is investigated in this paper. The nonlinear model predictive control approach is used because of its ability to predict the future behavior of the system. The fault/failure of the thrusters changes the mapping between the commanded forces to the thrusters and actual force/torque generated by the thruster system. Thus, the basic six degree-of-freedom kinetic equations are separated from this mapping and a set of neural networks are trained off-line to learn the kinetic equations. Then, two neural networks are attached to these trained networks in order to learn the thruster commands to force/torque mappings on-line. Different off-nominal conditions are modeled so that neural networks can detect any failure and fault, including scale factor and misalignment of thrusters. A simple model of the spacecraft relative motion is used in MPC to decrease the computational burden. However, a precise model by the means of orbit propagation including different types of perturbation is utilized to evaluate the usefulness of the proposed approach in actual conditions. The numerical simulation shows that this method can successfully control the all-thruster spacecraft with ON-OFF thrusters in different combinations of thruster fault and/or failure.     

Statistical characteristics of low latitude Pc4s: Influence of solar wind and IMF parameters

Pc4 signatures for the year 2013, extracted from geomagnetic north–south and east–west components of induction coil magnetometer (LEMI 30) from low latitude station Desalpar (DSP), operated by Institute of Seismological Research (ISR), India have been investigated vis-à-vis the prevalent interplanetary parameters (IMF) as well as the geomagnetic activity indices. A clear dominance of Pc4-5 (467 events) over Pc3 (17 events) is observed. Local time variation of Pc4 shows a peak in the noon sector in both X and Y components. Our investigations show that the dominant peak frequency is 10 mHz at low latitude region. Correlations with solar wind and IMF parameters illustrate highest occurrence of Pc4 for a solar wind speed of 300–400 km/s and average IMF B field of 3–6 nT. The amplitude of Pc4s at DSP shows an increase with increasing solar wind speed, plasma density, solar wind dynamic pressure and average B field which is also reflected in the trend of frequency variation of these pulsations. We report that IMF clock angle at low latitude does not have influence on Pc4 occurrence. Based on the characteristics of these events, detected in latitudinally distributed stations from low and mid-latitudes from northern and southern hemisphere, we infer that modes were compressional, which could be driven by K-H instability or solar wind dynamic pressure, as compressional modes can propagate to low latitude with little attenuation.